|
11-21-2007, 11:28 PM
|
#1 |
|
70 C/10-Work in progress
Join Date: Aug 2005
Location: Kansas
Posts: 601
|
FS: 3 speed w/Dana 20
Came with my blazer, was told it ran but really doubt it.
$50, can be picked up around Omaha, NE or in Northeast Kansas      
__________________
In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project |
|
|
|
11-22-2007, 12:18 PM
|
#2 |
|
Senior Member
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
|
Re: FS: 3 speed w/Dana 20
If you are willing to part out the t-case shifter box, I am looking for one that is not worn out. The detent plate above the bottom cover on mine is rusted out badly and the shafts inside mine are in bad shape as well.
__________________
-Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals... |
|
|
|
|
11-22-2007, 01:23 PM
|
#3 |
|
70 C/10-Work in progress
Join Date: Aug 2005
Location: Kansas
Posts: 601
|
Re: FS: 3 speed w/Dana 20
69towrig, do you have a picture of exactly what you need so I can compare?
__________________
In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project |
|
|
|
|
11-22-2007, 05:03 PM
|
#4 |
|
Senior Member
Join Date: Jan 2005
Location: Raleigh, NC
Posts: 894
|
Re: FS: 3 speed w/Dana 20
I'll buy the whole shifter box off of it. The bottom end of the shifter (inside the box) is completely worn out on mine as well. Basically everything that bolts onto the side of the transmission housing, less the links that go to the T-case is what I am looking for. I had a thread about the detent plate a while back, no one had responded to it. I will dig up the pictures from that for the plate, but I basically need another good box since about 4 or 5 major parts are worn out on mine.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
