WA 1972 Cheyenne K10 4x4 LWB frame rolling chassis

[John H.]

I was holding this for my next project, but my current one is going very slow and I could use the space. This would be great for a 4x4 swap.

4x4 LWB rolling chassis with title and spid in WA. Truck originally came from CA and is really nice with little to no pitting. I have attached a picture of the cab that was used for a 72 Cheyenne Super 4x4 swb project, so the chassis with no bed is all that is left.

I believe the posi is still under it and sits on its original wheels. Will come with a trans/transfer case, 73 incorrect non running 350. including the chrome shifter. Blue spicer hubs on the front dana.

I will try to get some pics up tomorrow if there is any interest.

$1250 or offer

[allons]

I'm interested . . I'll PM you for more pics. Weather will be a factor in getting it. How long could you store it? Thanks, Jim

[John H.]

Jim,

What would be your plan in getting it out to Ohio? I am using it for a template, but I need the space to buy a boat.

[allons]

It has been a difficult winter, and I cannot anticipate what it looks like for the next 4-6 weeks. If I bought it, it might be April before I could get out there to haul it back. Jim

[John H.]

It snowed here yesterday. I will get some pictures of it by Saturday.

Here is what is included:
Frame
Front and rear ends including drive shafts
350 hydramatic
205 transfer case
Chrome shifter handle
4x4 steering box and centerline
Rear step bumper
All crossmembers
Spid
Title
Vin
It is all bolted up.

[nightmare]

Can this be shipped, and how much would it cost to ship this to 77084?

[John H.]

I have not shipped a non running vehicle, so I am not sure where to start. The tie rods and center link are still attached to the steering box, so it would pull onto a trailer pretty easy.

[John H.]

I will have pictures up this weekend.

Open to realistic offers too.

[dave666693]

is this a 1/2 or 3/4 ton? What rear end?

[John H.]

1/2 ton. I am not sure what the axle is.

I will assume 3:73. Might need to crack it open to tell.

[dave666693]

I'll check back when you have pics

[John H.]

I plan to keep the following:

Front Bumper brackets
ebrake cables
exhaust
dipstick
pulleys

[John H.]

[John H.]

[John H.]

[John H.]

Ttt

[walkintall54]

Did you sell your 4x4 frame?

[John H.]

Not yet. Great deal for someone.

[John H.]

Bump for an offer!

[69buildup]

Do you still have this frame/cab?

[John H.]

TTT: update, motor is out and exhaust.

Rolling chassis with transfercase, trans, Rearend, front end, steering box.

Would consider parting if there is enough interest.

[weedguy]

Is the cab for sale as a stand alone unit?

[John H.]

Sorry, just the frame paperwork, spid etc. cab went on a 72 SWB Cheyenne super 4x4.

[pimpston65]

Originally Posted by John H.

Sorry, just the frame paperwork, spid etc. cab went on a 72 SWB Cheyenne super 4x4.

is the steering box setup spoken for? if not i will take it as long as its power steering gearbox

[pimpston65]

Originally Posted by John H.

TTT: update, motor is out and exhaust.

Rolling chassis with transfercase, trans, Rearend, front end, steering box.

Would consider parting if there is enough interest.

what type of trans is that and do you ship thru Greyhound? i would need the whole setup trans,crossmember,gear selector brackets. transfercase,crossmember all the from the back of the engine back to the rear excluding the rearend. if the shipping it right as well as the price!!!