IN Fleetside bed floor patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 09-06-2017, 11:48 AM

I don't have large sections, maybe 12" L x 24" W. Also have SWB sides but not much left of them. Front panel is decent, has rust-through on bottom flange in a couple places. Patches $20-up depending on size, front panel $50, all plus shipping. Let me know what you need.

fast70swb · 09-06-2017, 02:57 PM

Passenger side bedside from the marker light back the whole tail light area is that section good and how much if you would cut it

**70STOVEBOLT** · 09-06-2017, 03:17 PM

Sorry, both of the taillight areas are dented/rusted. There is a pair for sale here on the board.

fast70swb · 09-06-2017, 04:10 PM

Thank you for the reply. I seen those after I message you.

tallbob · 09-07-2017, 04:19 PM

I need some bed floor patches. What size panels do you have available? I need a piece to repair the rear section of floor by the tailgate and a couple other pieces for in front of the wheel tubs. I have no problem splicing patches together to make one good one. This isnt a show truck. What ever sizes are easier to ship. Thanks much, Bob

**70STOVEBOLT** · 09-07-2017, 05:03 PM

Bob, I will check and see if I have some good pieces this evening and let you know.

Thanks,
Mark

jessemthompson · 09-07-2017, 10:38 PM

I'm looking for an 8"x8" patch

tallbob · 09-07-2017, 11:18 PM

Thanks Mark. I will look forward to hearing what you have.

**70STOVEBOLT** · 09-08-2017, 07:43 AM

Bob I didn't get pics last night, it was raining, but I will tonight.

**70STOVEBOLT** · 09-08-2017, 07:44 AM

Quote:

Originally Posted by jessemthompson

I'm looking for an 8"x8" patch

What area, or does it matter?

davem815 · 09-09-2017, 05:53 AM

I'm looking for one or two patchs that included the end of a raised rib. I'll yry to get you a picture of what i need. Dave

**70STOVEBOLT** · 09-09-2017, 03:23 PM

tallbob the front of the wheel well areas are both shot. What part did you need at the rear of the floor?

tallbob · 09-09-2017, 04:40 PM

The last 6" across the full width of the rear of the bed floor. Seems like a common area where most rust damage occurs.

**70STOVEBOLT** · 09-10-2017, 01:40 PM

Unfortunately that part is shot as well

tallbob · 09-10-2017, 06:30 PM

Do you have a section of the floor that I could use for just general patching? Say 18"x30" or so? Thanks

**70STOVEBOLT** · 09-12-2017, 05:34 PM

Maybe 12 x 24 but not 18

tallbob · 09-12-2017, 08:38 PM

I can make that work. Do you have access to just one or is two pieces possible?

**70STOVEBOLT** · 09-13-2017, 08:27 AM

I have 2 pieces, I will check them out after work and post pics if it's not raining.

**70STOVEBOLT** · 09-13-2017, 08:29 AM

Quote:

Originally Posted by jessemthompson

I'm looking for an 8"x8" patch

Let me know what area of the floor, I can cut a piece.

**70STOVEBOLT** · 09-13-2017, 08:33 AM

Quote:

Originally Posted by davem815

I'm looking for one or two patches that includes the end of a raised rib. I'll try to get you a picture of what i need. Dave

Dave, did you get a pic?

**DA68** · 09-13-2017, 12:04 PM

I'm interested in a "middle of the bed" or close, floor patch. Just want it to be relatively straight and without major pitting.

**70STOVEBOLT** · 09-13-2017, 12:05 PM

Quote:

Originally Posted by DA68

I'm interested in a "middle of the bed" or close, floor patch. Just want it to be relatively straight and without major pitting.

What size patch do you need?

**70STOVEBOLT** · 09-13-2017, 07:26 PM

I took some pics of the pieces I have, I will post them tomorrow, it keeps telling me a security token is missing when I try to post from my phone.

**DA68** · 09-13-2017, 09:24 PM

That message means you need to resize your images (make them smaller). Somewhere on the forum they give recommended sizes. I open my images with one of the MS apps and resize to "web large". In regard to the patch, a 12"x12" or slightly larger will work.

**70STOVEBOLT** · 09-14-2017, 11:42 AM

Here are some pics of the first 2 pieces that I have guys. Let me know what will work for you and what size and give me zip codes and I can get shipping quotes.
More pics to follow. See the tape measure for sizes. Sorry for the quality of the pics, had to resize them to get them to upload.

09-06-2017, 11:48 AM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Fleetside bed floor patch panels I don't have large sections, maybe 12" L x 24" W. Also have SWB sides but not much left of them. Front panel is decent, has rust-through on bottom flange in a couple places. Patches $20-up depending on size, front panel $50, all plus shipping. Let me know what you need. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-06-2017, 02:57 PM	#2
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: Fleetside bed floor patch panels Passenger side bedside from the marker light back the whole tail light area is that section good and how much if you would cut it

09-06-2017, 03:17 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Sorry, both of the taillight areas are dented/rusted. There is a pair for sale here on the board. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-06-2017, 04:10 PM	#4
fast70swb Registered User Join Date: Apr 2014 Location: Bridge Creek , Oklahoma Posts: 69	Re: Fleetside bed floor patch panels Thank you for the reply. I seen those after I message you.

09-07-2017, 04:19 PM	#5
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels I need some bed floor patches. What size panels do you have available? I need a piece to repair the rear section of floor by the tailgate and a couple other pieces for in front of the wheel tubs. I have no problem splicing patches together to make one good one. This isnt a show truck. What ever sizes are easier to ship. Thanks much, Bob

09-07-2017, 05:03 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Bob, I will check and see if I have some good pieces this evening and let you know. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-07-2017, 10:38 PM	#7
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: Fleetside bed floor patch panels I'm looking for an 8"x8" patch

09-07-2017, 11:18 PM	#8
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels Thanks Mark. I will look forward to hearing what you have.

09-08-2017, 07:43 AM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Bob I didn't get pics last night, it was raining, but I will tonight. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-09-2017, 05:53 AM	#11
davem815 Registered User Join Date: Jun 2013 Location: Warren, IN Posts: 313	Re: Fleetside bed floor patch panels I'm looking for one or two patchs that included the end of a raised rib. I'll yry to get you a picture of what i need. Dave __________________ 1966 GMC 1500 (3/4 ton) Custom V6 3sp Edna 1970 GMC C2500 Deluxe lwb 307/4sp Ol' Green 1971 Chevy C20 Custom lwb 307/3OTT, now a project in family since 1974 2014 GMC K2500 Crewcab 6.0 gas 2005 GMC Canyon Ext cab 4wd daily driver 1963 F*rd/Howe C750 fire truck 11,000 miles

09-09-2017, 03:23 PM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels tallbob the front of the wheel well areas are both shot. What part did you need at the rear of the floor? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 09-13-2017 at 08:28 AM.

09-09-2017, 04:40 PM	#13
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels The last 6" across the full width of the rear of the bed floor. Seems like a common area where most rust damage occurs.

09-10-2017, 01:40 PM	#14
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Unfortunately that part is shot as well __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-10-2017, 06:30 PM	#15
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels Do you have a section of the floor that I could use for just general patching? Say 18"x30" or so? Thanks

09-12-2017, 05:34 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Maybe 12 x 24 but not 18 __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

09-12-2017, 08:38 PM	#17
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels I can make that work. Do you have access to just one or is two pieces possible?

09-13-2017, 08:27 AM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels I have 2 pieces, I will check them out after work and post pics if it's not raining. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-13-2017, 12:04 PM	#21
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Fleetside bed floor patch panels I'm interested in a "middle of the bed" or close, floor patch. Just want it to be relatively straight and without major pitting.

09-13-2017, 07:26 PM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels I took some pics of the pieces I have, I will post them tomorrow, it keeps telling me a security token is missing when I try to post from my phone. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-13-2017, 09:24 PM	#24
DA68 Registered User Join Date: Oct 2006 Location: Ohio Posts: 967	Re: Fleetside bed floor patch panels That message means you need to resize your images (make them smaller). Somewhere on the forum they give recommended sizes. I open my images with one of the MS apps and resize to "web large". In regard to the patch, a 12"x12" or slightly larger will work.

09-14-2017, 11:42 AM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,367	Re: Fleetside bed floor patch panels Here are some pics of the first 2 pieces that I have guys. Let me know what will work for you and what size and give me zip codes and I can get shipping quotes. More pics to follow. See the tape measure for sizes. Sorry for the quality of the pics, had to resize them to get them to upload. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.