![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2009
Location: Central Valley,ca
Posts: 174
|
Adapters for c5 fuel regulator
What are part numbers for c5 regulator to AN6 line? Using Ptfe hose and a 3/8th" hard line down the frame rail. Finally getting to work on my '67.
|
![]() |
![]() |
![]() |
#2 |
Post Whore
![]() ![]() Join Date: May 2015
Location: Alabama
Posts: 14,608
|
Re: Adapters for c5 fuel regulator
c5 regulator? ...is this the commonly used vett filter/reg with pushlok fittings.?
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2009
Location: Central Valley,ca
Posts: 174
|
Re: Adapters for c5 fuel regulator
Yes, the corvette filter/regulator. I bought kit from summit,but it's incomplete. The line to the filter from the pump has a barb, but I'm unsure of the fitting for it.
|
![]() |
![]() |
![]() |
#4 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: Adapters for c5 fuel regulator
It should be GM Quick connect no? 3/8 feed, 5/16 on the return from the reg to the tank.
If your going to AN, then its a 3/8 Quick Connect->-6 male AN. The other one is 5/16 Quick connect->-6 male AN. The female side of the regulator accepts the 45* flare hard lines for fuel. Summit and Jegs both carry the common Russel or Earls versions of what your looking for.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING ![]() |
![]() |
![]() |
![]() |
#5 |
Post Whore
![]() ![]() Join Date: May 2015
Location: Alabama
Posts: 14,608
|
Re: Adapters for c5 fuel regulator
^^^^yep....brew beat me to it...^^^^...be sure you plumb it up correctly. .
|
![]() |
![]() |
![]() |
Bookmarks |
|
|