CA 60-66 Fleetside Long bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kyle@FTP · 10-20-2015, 12:46 PM

Complete bed, no known rust, straight rails, straight tailgate, straight head board, wood still useable. complete $600 OBO

Bedsides $200 per side
Tailgate $200
Headboard $100

Located in San Diego

Kyle@fredstruckparts.com
760-215-0269

Kyle@FTP · 12-09-2015, 07:25 PM

all offer welcome

**jmader** · 12-09-2015, 07:50 PM

Would you ship the bedsides?

Kyle@FTP · 12-09-2015, 07:57 PM

I will gladly ship bedsides if you want to pay for shipping.

Greyhound will only ship 82" and these are a big longer. They would have to go truck freight. Let me check with fastenol.

**jmader** · 12-09-2015, 08:01 PM

Quote:

Originally Posted by Kyle@FTP

I will gladly ship bedsides if you want to pay for shipping.

Greyhound will only ship 82" and these are a big longer. They would have to go truck freight. Let me check with fastenol.

That would be great. There is a fastenol here so that would work. I'm in Grand Island NE. Zip code is 68803. Thank you!

Kyle@FTP · 12-09-2015, 08:19 PM

I just put in the request to fastenol. Hopefully have something back soon.

thekid54 · 12-13-2015, 05:33 AM

Have any more pics of the tailgate?

**jmader** · 12-14-2015, 10:46 AM

Any word from fastenol?

**jmader** · 12-21-2015, 06:07 PM

Bump

Kyle@FTP · 12-21-2015, 06:11 PM

JMader, I knew I had a fastonal quote for a reason but couldnt remember what thread it was too. Sorry.

So Fastonal actually denied shipment as they are to busy right now. Im open to any other suggestions as I need to sell this bed.

**jmader** · 12-21-2015, 06:41 PM

Besides greyhound and fastenol I don't really know of any other shipping options. Would fastenol ship them after the holidays possibly?

Kyle@FTP · 12-21-2015, 06:47 PM

They wouldnt say. This was my first experience with them and I had to fill out a online application then wait for a email saying yay or nay. I was unable to reach anyone by phone to get more details.

Sick5 · 12-22-2015, 11:37 AM

hey fred are the bed sides straight?

Kyle@FTP · 12-22-2015, 01:10 PM

They bed is in pretty good condition as far as I can tell.

Sick5 · 12-22-2015, 02:36 PM

Ok thank you

rickoner · 12-22-2015, 09:34 PM

Would you sell the wood and strips seperately? Could you describe their condition a bit better too? I'm building a patina truck and would rather find some originals instead of going the barn wood route.

If you would want to figure shipping, I could pick up at the Pittsburgh greyhound.

**jmader** · 12-24-2015, 09:41 AM

Still trying to figure out how to ship the bedsides. I will take them if we can figure out a way...

Kyle@FTP · 12-24-2015, 12:34 PM

Quote:

Originally Posted by rickoner

Would you sell the wood and strips seperately? Could you describe their condition a bit better too? I'm building a patina truck and would rather find some originals instead of going the barn wood route.

If you would want to figure shipping, I could pick up at the Pittsburgh greyhound.

Greyhound wont take the wood as its to long. Shipping on new wood sets back east is usually around $150. If I can get the wood out without damaging it, it would be great for a patina truck. It was originally going in a customers patina truck but he decided to go new. Wood and strips, what sounds fair? $150? plus shipping?

Quote:

Originally Posted by jmader

Still trying to figure out how to ship the bedsides. I will take them if we can figure out a way...

Shipping big stuff is tricky and I would love to find a way. They are yours if we can find a shipping in a timely manner. Maybe try fastonal on your end. Maybe they just dont like me.

rickoner · 12-26-2015, 01:38 PM

Quote:

Originally Posted by Kyle@FTP

Greyhound wont take the wood as its to long. Shipping on new wood sets back east is usually around $150. If I can get the wood out without damaging it, it would be great for a patina truck. It was originally going in a customers patina truck but he decided to go new. Wood and strips, what sounds fair? $150? plus shipping?

Adding shipping at that price would definitely make it more than I could spend at the moment. But... I forgot to say that it would be for a short bed. So if you'd be willing to cut them so it'll fall within greyhounds limits maybe we could make a deal. Weight might be another story though?

Kyle@FTP · 12-28-2015, 01:05 PM

Quote:

Originally Posted by rickoner

Adding shipping at that price would definitely make it more than I could spend at the moment. But... I forgot to say that it would be for a short bed. So if you'd be willing to cut them so it'll fall within greyhounds limits maybe we could make a deal. Weight might be another story though?

From what I have read and prices with grey hound, weight is never really an issue. I could be wrong. If I can get it out without breaking it I should be able to cut it down to size for you. Its a little more work but if you get what you need and I get some parts gone, Im ok with that. Im quickly running out of room to store stuff.

thekid54 · 12-29-2015, 04:29 AM

Quote:

Originally Posted by thekid54

Have any more pics of the tailgate?

More pics of tailgate? I'm looking for a straight tailgate, small dents are ok, just as long as it is not bowed.

**jmader** · 12-29-2015, 10:13 AM

Quote:

Originally Posted by Kyle@FTP

Greyhound wont take the wood as its to long. Shipping on new wood sets back east is usually around $150. If I can get the wood out without damaging it, it would be great for a patina truck. It was originally going in a customers patina truck but he decided to go new. Wood and strips, what sounds fair? $150? plus shipping?

Shipping big stuff is tricky and I would love to find a way. They are yours if we can find a shipping in a timely manner. Maybe try fastonal on your end. Maybe they just dont like me.

I'm going to contact them today. What info do they need? Length? Weight? Etc.

Kyle@FTP · 12-29-2015, 11:39 AM

Quote:

Originally Posted by jmader

I'm going to contact them today. What info do they need? Length? Weight? Etc.

Yup. Standard info. They would be shipping from the Fastenal store in Escondido CA 92029

**jmader** · 12-29-2015, 07:59 PM

Quote:

Originally Posted by Kyle@FTP

Yup. Standard info. They would be shipping from the Fastenal store in Escondido CA 92029

Could you give me an approximate weight and dimensions of the bedsides so I can use their online quote estimator? Thanks.

Kyle@FTP · 12-29-2015, 08:20 PM

96" x36"x8"
Guessing each fender weighs 60lbs or so.

10-20-2015, 12:46 PM	#1
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	60-66 Fleetside Long bed Complete bed, no known rust, straight rails, straight tailgate, straight head board, wood still useable. complete $600 OBO Bedsides $200 per side Tailgate $200 Headboard $100 Located in San Diego Kyle@fredstruckparts.com 760-215-0269 Attached Images

12-09-2015, 07:25 PM	#2
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed all offer welcome

12-09-2015, 07:50 PM	#3
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 60-66 Fleetside Long bed Would you ship the bedsides? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-09-2015, 07:57 PM	#4
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed I will gladly ship bedsides if you want to pay for shipping. Greyhound will only ship 82" and these are a big longer. They would have to go truck freight. Let me check with fastenol.

12-09-2015, 08:19 PM	#6
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed I just put in the request to fastenol. Hopefully have something back soon.

12-13-2015, 05:33 AM	#7
thekid54 Registered User Join Date: Jan 2006 Location: LA, CA Posts: 296	Re: 60-66 Fleetside Long bed Have any more pics of the tailgate? __________________ Panel Beaters C.C.

12-14-2015, 10:46 AM	#8
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 60-66 Fleetside Long bed Any word from fastenol? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-21-2015, 06:07 PM	#9
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 60-66 Fleetside Long bed Bump __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-21-2015, 06:11 PM	#10
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed JMader, I knew I had a fastonal quote for a reason but couldnt remember what thread it was too. Sorry. So Fastonal actually denied shipment as they are to busy right now. Im open to any other suggestions as I need to sell this bed.

12-21-2015, 06:41 PM	#11
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 60-66 Fleetside Long bed Besides greyhound and fastenol I don't really know of any other shipping options. Would fastenol ship them after the holidays possibly? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-21-2015, 06:47 PM	#12
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed They wouldnt say. This was my first experience with them and I had to fill out a online application then wait for a email saying yay or nay. I was unable to reach anyone by phone to get more details.

12-22-2015, 11:37 AM	#13
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 60-66 Fleetside Long bed hey fred are the bed sides straight? __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

12-22-2015, 01:10 PM	#14
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed They bed is in pretty good condition as far as I can tell.

12-22-2015, 02:36 PM	#15
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 60-66 Fleetside Long bed Ok thank you __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

12-22-2015, 09:34 PM	#16
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: 60-66 Fleetside Long bed Would you sell the wood and strips seperately? Could you describe their condition a bit better too? I'm building a patina truck and would rather find some originals instead of going the barn wood route. If you would want to figure shipping, I could pick up at the Pittsburgh greyhound.



Register or Log In To remove these advertisements.

12-24-2015, 09:41 AM	#17
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 60-66 Fleetside Long bed Still trying to figure out how to ship the bedsides. I will take them if we can figure out a way... __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-29-2015, 08:20 PM	#25
Kyle@FTP Registered User Join Date: Dec 2013 Location: Escondido Posts: 700	Re: 60-66 Fleetside Long bed 96" x36"x8" Guessing each fender weighs 60lbs or so.

Register or Log In To remove these advertisements.