The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-12-2005, 05:08 PM   #1
mrgoodwrench_420
Registered User
 
Join Date: Jul 2005
Location: downingtown pa
Posts: 62
frame help

i am looking in to frames and want to know the what the pros and cons are of coil and leaf spring and what they are worth
mrgoodwrench_420 is offline   Reply With Quote
Old 11-12-2005, 07:43 PM   #2
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: frame help

Coils ride better
coils plant power better
coils are rated at the same GVW as leafs
Longhorn Man is offline   Reply With Quote
Old 11-12-2005, 08:21 PM   #3
4tiresngas
An American Soldier
 
4tiresngas's Avatar
 
Join Date: Feb 2005
Location: Grumolo D' Abadessee, Italy
Posts: 503
Re: frame help

I agree. NASCAR runs trailing arms and coil springs...performance. Also, I think it is easier to adjust your ride height with coils springs to get the stance you want.
__________________
Dan

dan.brue@us.army.mil
4tiresngas is offline   Reply With Quote
Old 11-12-2005, 08:28 PM   #4
roj2323
Senior Member
 
Join Date: Mar 2004
Location: Somewhere
Posts: 985
Re: frame help

roj2323 is offline   Reply With Quote
Old 11-12-2005, 09:02 PM   #5
llegos
Registered User
 
Join Date: Aug 2005
Location: pleasanton, CA
Posts: 570
Re: frame help

if coils are so great and all, why arent they still used, and why were leaves available? Im not trying to be ignorant, im just uninformed
__________________
-Steve
llegos is offline   Reply With Quote
Old 11-12-2005, 10:15 PM   #6
Green Machine
Senior Member
 
Green Machine's Avatar
 
Join Date: Jul 2004
Location: Estherville, Iowa
Posts: 3,371
Re: frame help

One claimed advantage of leafs is that they support each side of the frame in two places and distribute the load across those two points, where coil concentrates the load mostly right over the coil. When GM used helper springs on the coil models, notice that it helps support the back of the frame. Leafs may be better if you have a heavy trailer attached to the rear bumper, since you have a spring attached nearer the rear of the frame. Leafs are probably cheaper to produce, and since all the 4wd were leafs, I suspect as the percentage of 4wd grew vs the 2wd, that the coils went away. My 88 C1500 2wd has leafs and even given 20 years of possible leaf refinement, my 68 and my 70 both have coils and do in fact ride better.
__________________
1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103
1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285
1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894
2001 GMC Sierra 1500 C3 6.0
Green Machine is offline   Reply With Quote
Old 11-12-2005, 10:34 PM   #7
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: frame help

Also, coils came back

Leaf suspension is cheaper to manufacture. The spring locates the axle as well as supports the vehicle weight. They also tend to be stonger for the reasons already stated. Two areas anchored to the frame.

Coils do not locate the axle, so more moving parts, bushings to wear out, bolts to break, etc.
FormerMember is offline   Reply With Quote
Old 11-13-2005, 09:42 PM   #8
qksilver
Senior Member
 
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
Re: frame help

I have both styles. I prefer leafs for towing and carrying heavy loads. Even with sway bars front and back, the leaf spring rear doesn't sway and going around corners loaded doesn't feel as tippy.
The coils do ride better and with proper pinion angle will hook up better in high horsepower situations.
Steve
qksilver is offline   Reply With Quote
Old 11-13-2005, 09:50 PM   #9
RPOZ11
72 BB C30 Super LongHorn
 
RPOZ11's Avatar
 
Join Date: Nov 2002
Location: Chavez Ravine
Posts: 1,606
Unhappy Re: frame help

Years ago out at Ascot Speedway, now demolished, this question was presented to the owner/head guy over at PRE; I forget his name: Gary Sigmund????
Anyways, he stated that under demand, the trailing arm suspension tended to load up the rear of the suspension causing improper transfer....at least this is the best of my recolection as best my memory serves me.
This was based upon knowledge and technology years ago; Unsure what the current understanding suggests....

Leafs seem more practical to me and I have never experienced a bad set-up while towing. My 69 Suburban would tend to allow trailer sway at certain speeds. That truck was a trailing arm-coil spring set-up....
Just my thoughts....
__________________
72 BB C/30 Longhorn Super
HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM


HO72 build :
http://67-72chevytrucks.com/vboard/s...d.php?t=714492

2017 SS
RPOZ11 is offline   Reply With Quote
Old 11-13-2005, 10:01 PM   #10
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: frame help

my 01 sub 4x4 has coil rear!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 11-13-2005, 10:08 PM   #11
Robert1970C20rstbukt
Registered User
 
Robert1970C20rstbukt's Avatar
 
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
Re: frame help

The downside to coils is they are weaker than leafs. There was a 2000lb Lincoln engine driven welder in the back of my truck when I got it and it was sagging big time. If it would've had the optional leaf overloads it might have supported it better.
__________________
RJD

1984 Chevrolet C30 welding truck 454/SM465
1977 GMC C15 pickup 350/TH350
1970 Chevrolet C20 pickup 350/TH400
1970 Chevrolet K20 Suburban 454/TH350
1969 GMC 8500 478M V6/5 spd winch truck
Robert1970C20rstbukt is offline   Reply With Quote
Old 11-13-2005, 10:23 PM   #12
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: frame help

However, when they were new and not x00,000 miles old, they were both rated for the same load.
A few years ago I had towed a SMALL u-haul trailer that was only semi loaded with my old SWB GMC.... coils in the back. Anything over 55 and the rear was swaying all over the place. I came on here and asked about it since all I had towed with was leafs previously. I had been told at the time that my swaying rear was probably due to worn out parts...and since it was in fact a 500,000 mile old POS...and most every piece of rubber underneath was junk anyways, I considered it as a probable reason.
If this is fact or not... I have NFC since I have never towed with a good coil rear.
i DO know Huck overloaded his old 1/2 ton all the time towing, and I am thinking he had coils.



Last edited by Longhorn Man; 11-13-2005 at 10:45 PM.
Longhorn Man is offline   Reply With Quote
Old 11-13-2005, 11:32 PM   #13
chevymad
Registered User
 
Join Date: Jan 2001
Location: skamokawa, WA, USA
Posts: 527
Re: frame help

The spring spacing is wider apart on leaf's too. This gives an advantage to sway. If you've ever made a trailer out of a coil sprung truck.. you know the thing is really really bouncy compared to a leaf unit as well.
__________________
70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop

70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress
chevymad is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com