The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-13-2009, 11:35 PM   #1
alskyline
Registered User
 
alskyline's Avatar
 
Join Date: Jan 2007
Location: Arizona
Posts: 25
Need Help with Wheels!!!

I am having trouble with finding wheels for my 72 SWB. I have lowered with 2.5 drop spindles and 4" in the back. Due to the Disc brake conversion on all four tires I also would like to have the wider wheels on the back to compensate for the increase in distance of the front wheels. First of all, I am struggling to find a wheel that has a compatible offset, secondly one that also comes in different widths. I want to put 18" Wheels on and then have two that have a width of 8.5 in the front and 10" width in the rear. I also converted my bolt pattern to the 6x5.5 because i really liked a wheel from KMC that they have now discontinued and I have learned that it wouldn't have fit anyway. I am learning a lot right now about wheels and tires. Here are my thoughts:
-1972 SWB
-Lowered 2.5/4
-6x5.5 Bolt Pattern
-18" Wheels with Widths of 18x8.5 and 18x10
-Tires 255/50/18 Front and 275/50/18 Rear

Can you all guide me to manufacturers that can accommodate this?
Any ideas are welcomed also.
Please correct me if I am completely wrong also.
alskyline is offline   Reply With Quote
Old 04-14-2009, 09:25 AM   #2
sneakysnake
It's a catastrophic success.
 
sneakysnake's Avatar
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
Re: Need Help with Wheels!!!

Ive found that 6 lug choices are very limited.If you have the bucks Boyds has a set with rim sizes and widths but are pricey.Crager has one but limited sizes.
I suggest google image "6 lug rims" it will let you know whats available.
Attached Images
  
sneakysnake is offline   Reply With Quote
Old 04-14-2009, 09:40 AM   #3
alskyline
Registered User
 
alskyline's Avatar
 
Join Date: Jan 2007
Location: Arizona
Posts: 25
Re: Need Help with Wheels!!!

Yes, I did find the Boyds but WOW, they are expensive.
alskyline is offline   Reply With Quote
Old 04-14-2009, 10:43 AM   #4
alskyline
Registered User
 
alskyline's Avatar
 
Join Date: Jan 2007
Location: Arizona
Posts: 25
Re: Need Help with Wheels!!!

What about spacers? Can you equal out the length in the rear by using them? Do they exist?
alskyline is offline   Reply With Quote
Old 04-14-2009, 10:45 AM   #5
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: Need Help with Wheels!!!

american Racing etc. should have some as well. some may be custom builds. go to discount tire, or tirerack.com etc. and see what wheels are available in the size, backspacing, etc. you want.
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 04-14-2009, 11:15 AM   #6
ap2002
Registered User
 
Join Date: Apr 2008
Location: Houston, TX
Posts: 247
Re: Need Help with Wheels!!!

you aint going to find many choices, either boyd or a custom made wheel and they all going to cost! and if you are going to pay might as well go wide and maybe bigger like a 20x10 in the rear.... i had the same issue, mine was converted 5lug disc brake in the front.... but i settle fro some eagles for now until maybe 2-3yrs when i get the body/paint work done.... it is hard to find a wheel that makes both 5lug (front) & 6lug (rear) especially in a 18"+ size....

here is pics of mine, 15x8 in the front and 16x10 in the back with a 295x50x16. i like how the wide looks plus it tucks in perfect! since these pics, i raised the truck from the front, and put some 245/60 instead of the 275/60 and it looks alot better now...

[IMG][/IMG]

[IMG][/IMG]
__________________
1971 C-10 SWB - LS swap w/4L60e, 20x8.5front 20x12rear,
1968 C-10 SWB - 454 BB TH350 -Gone!
ap2002 is offline   Reply With Quote
Old 04-14-2009, 11:23 AM   #7
short-t
Registered User
 
short-t's Avatar
 
Join Date: Mar 2008
Location: Calgary, ab
Posts: 325
Re: Need Help with Wheels!!!

I feel your pain! I just did a 3.5/5 drop and drum to disk conversion on my 68. The truck had a nice set of AR Moab 17X10 with 4.5 B.S. all the way around. They fit and looked pretty good but now they stick out on the front due to the extra width the disk conversion adds.

So now comes the pain. I was going to convert to 5 lug while I was doing the brake conversion but decided to keep it 6 lug due to the cost of the complete build (LS2 going in as well). So I start to look at 6 lug wheels and there really isn’t much to choose from that have custom offsets etc. So I started planning to do the 5 lug conversion and new wheels. The wheel that my wife and I both liked is the Billet specialties Vintec dish in a 17 or 18. On their web site the specs only show it in 5 lug so I gave them a call to see if they could drill it 6 X5.5 and they said they could as long as the wheel is 17” and bigger. What a relief! Now I don’t have to do the 5 lug swap and we found a set of hot wheels that I can get custom back spacing to fit this truck.

Here is a couple of pictures of the Vintec, one dished one without. I also like the fact that it has the center cover to hide all those lug nuts.



short-t is offline   Reply With Quote
Old 04-14-2009, 11:33 AM   #8
short-t
Registered User
 
short-t's Avatar
 
Join Date: Mar 2008
Location: Calgary, ab
Posts: 325
Re: Need Help with Wheels!!!

Quote:
Originally Posted by ap2002 View Post
you aint going to find many choices, either boyd or a custom made wheel and they all going to cost! and if you are going to pay might as well go wide and maybe bigger like a 20x10 in the rear.... i had the same issue, mine was converted 5lug disc brake in the front.... but i settle fro some eagles for now until maybe 2-3yrs when i get the body/paint work done.... it is hard to find a wheel that makes both 5lug (front) & 6lug (rear) especially in a 18"+ size....

here is pics of mine, 15x8 in the front and 16x10 in the back with a 295x50x16. i like how the wide looks plus it tucks in perfect! since these pics, i raised the truck from the front, and put some 245/60 instead of the 275/60 and it looks alot better now...

[IMG][/IMG]

[IMG][/IMG]

Nice 68! Would you know what the back spacing of your wheels are? Just trying to get some idea of were mine should be, I can't measure mine until I get the box and front clip back on.

And does your truck still have the 68 rear end in it??

Thanks,
Greg
short-t is offline   Reply With Quote
Old 04-14-2009, 12:41 PM   #9
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Need Help with Wheels!!!

i spent 2minutes on google found that american racing alone makes 41different wheels for your 6lug application// have you tried looking for them?
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 04-14-2009, 12:49 PM   #10
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: Need Help with Wheels!!!

been there done that. I know American Racing carried a bunch when i needed 6 lugs. didnt hurt that i worked for Discount tires for serveral years back in the day...
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 04-14-2009, 12:56 PM   #11
alskyline
Registered User
 
alskyline's Avatar
 
Join Date: Jan 2007
Location: Arizona
Posts: 25
Re: Need Help with Wheels!!!

Yes, I have looked at American Racing and I've been back there many times. The problem is that they don't have the same wheel in different widths.
alskyline is offline   Reply With Quote
Old 04-14-2009, 12:59 PM   #12
alskyline
Registered User
 
alskyline's Avatar
 
Join Date: Jan 2007
Location: Arizona
Posts: 25
Re: Need Help with Wheels!!!

Thanks for all your help. This forum is great! I will keep looking and respond back with any solutions and pictures.
alskyline is offline   Reply With Quote
Old 04-14-2009, 01:04 PM   #13
short-t
Registered User
 
short-t's Avatar
 
Join Date: Mar 2008
Location: Calgary, ab
Posts: 325
Re: Need Help with Wheels!!!

Quote:
Originally Posted by alskyline View Post
What about spacers? Can you equal out the length in the rear by using them? Do they exist?
Yes wheel spaces exist, looks like they go up to 1/2". Is that going to be enough?

Wheel spacers at Jegs-> http://www.jegs.com/p/Baer+Brake/759919/10002/-1

Last edited by short-t; 04-14-2009 at 01:06 PM.
short-t is offline   Reply With Quote
Old 04-14-2009, 01:24 PM   #14
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Need Help with Wheels!!!

call on the phone try talking to a live person to have them help build a wheel to your specs is an option
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 04-16-2009, 01:58 AM   #15
tucnnuts
if they can make it so can I!
 
tucnnuts's Avatar
 
Join Date: Feb 2008
Location: birmingham, alabama
Posts: 97
Re: Need Help with Wheels!!!

guys is the conversion rotors diff from the 88 model 3/4 rotors(6lug ones)?....i used the 88 /89 rotors and spindles(some where in there) with the 71-72 model 3/4 lower a arms with the 88 lower balljoints....change out uppers balljoints with the 881/2 ton one i think, maybe the 3/4 ..might be the same cant remember...the studs will be 14mm by 1.5 ...i then milled down the hub center in the rear axle to fit the newer wheel centers and put 14mm studs in , you might could buy some axles from strange or somebody like that with the bigger studs already in them , i used the rear 6 lug rotors from like a 99 tahoe and made brakets for the calipers( they sell them too) but if you do have the axles cut down to save on the momey and dont change to the newer disc, have them leave enuff of the old hub center to re center the drum on the studs...this will give you all the lastest rim choices and offsets...just me think-n oh yeah , prob goin to have to drill the drum to fit the new studs too.
tucnnuts is offline   Reply With Quote
Reply

Bookmarks

Tags
6 lug, wheels, widths


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com