TX Cup Holder Console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Flint70step · 12-20-2012, 07:58 AM

Cup Holder Console out of a 68 panel truck in very good condition.One small crack in the back by the hinge that is hardly noticeable,and two extra holes in front.I have a pic with my finger pointing at the crack but it is hairline and barely visible.No major scratches,grain is in good shape just needs to be stripped and repainted.

Asking $100 plus shipping or $100 local pick up

Darren MagooGardner · 12-20-2012, 10:31 AM

Is that a light saber? whats that for?

cypressbog · 12-20-2012, 12:46 PM

I thought it might be a caddle prod, lol.

Darren MagooGardner · 12-20-2012, 12:53 PM

Did the console come factory with the cup holders in the 68 panel truck? nice piece..I have one in in very nice shape ..I just wish it had the cup holders.

Flint70step · 12-20-2012, 09:26 PM

Quote:

Originally Posted by Darren MagooGardner

Is that a light saber? whats that for?

My 3yr old son wanted it in the pics,he was giggling his head off so I let it fly.

figured Jonathan would be all over this lol

Am I asking too much?

HotRod C/10 · 12-20-2012, 09:40 PM

Its been my experience selling these in this shape that 125.00-150.00 is gonna be tops on it in todays market. It kinda sucks, but it is what it is. GLWTS.

PT'S 70 CST · 12-20-2012, 10:21 PM

Guys from the looks of this it is no conversion, the yellow bowtie emblem and the reinforced hinge with the cup holder would make this a 73 and up truck or Blazer console. 69-72 did not have the yellow bowtie emblem or the reinforced hinge so if this console came out of a 68 panel truck then was not the original console and it would have came out of a 73 and up. 69-72 had the blue emblem and the single hinge.

PT

**29od1** · 12-20-2012, 10:29 PM

Yep you're right PT. it's a later model, I thought it was a single hinge when I first saw it.
Posted via Mobile Device

Flint70step · 12-20-2012, 11:26 PM

Thanks for the info guys.I guess I should drop price and list it in the correct section of the forum.I was just going by what my friend told when I got the console from him.It was in his 68 panel

make an offer,I will not be offended

PT'S 70 CST · 12-20-2012, 11:57 PM

This forum would be the best bet for you to sell the console and you have to keep in mind that shipping will run you in the 30-40 dollar range if you pack it well in the correct size box. That price is in the lower 48 and if you go to Canada it will run you in the 50's. I have sent these all over the US and Canada and those prices are spot on to what it will cost you.

PT

Flint70step · 12-21-2012, 08:20 AM

I will take $100 plus shipping or $100 local pick up

nobolt · 12-21-2012, 08:28 AM

hey flint, i'm interested. could you check shipping to 48001 please?

Flint70step · 12-21-2012, 11:47 PM

Quote:

Originally Posted by nobolt

hey flint, i'm interested. could you check shipping to 48001 please?

Hi Dave,Its yours for $135 shipped.PT says it should be around 30-40 bucks to ship and I trust his estimate as he has shipped these many times.Call me when you get a chance and I will go ahead and get it wrapped up and boxed for ya

nobolt · 12-22-2012, 10:15 AM

i have to pass Flint. sorry, but merry christmas,

Flint70step · 12-23-2012, 11:36 AM

Quote:

Originally Posted by nobolt

i have to pass Flint. sorry, but merry christmas,

You have a Merry Christmas too Dave

Still up for grabs

Morning bump

12-20-2012, 07:58 AM	#1
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Cup Holder Console Cup Holder Console out of a 68 panel truck in very good condition.One small crack in the back by the hinge that is hardly noticeable,and two extra holes in front.I have a pic with my finger pointing at the crack but it is hairline and barely visible.No major scratches,grain is in good shape just needs to be stripped and repainted. Asking $100 plus shipping or $100 local pick up __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668 Last edited by Flint70step; 12-23-2012 at 11:34 AM.

12-20-2012, 10:31 AM	#2
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Cup Holder Console Is that a light saber? whats that for?

12-20-2012, 12:46 PM	#3
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Cup Holder Console I thought it might be a caddle prod, lol.

12-20-2012, 12:53 PM	#4
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: Cup Holder Console Did the console come factory with the cup holders in the 68 panel truck? nice piece..I have one in in very nice shape ..I just wish it had the cup holders.

12-20-2012, 09:40 PM	#6
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Cup Holder Console Its been my experience selling these in this shape that 125.00-150.00 is gonna be tops on it in todays market. It kinda sucks, but it is what it is. GLWTS. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

12-20-2012, 10:21 PM	#7
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Cup Holder Console Guys from the looks of this it is no conversion, the yellow bowtie emblem and the reinforced hinge with the cup holder would make this a 73 and up truck or Blazer console. 69-72 did not have the yellow bowtie emblem or the reinforced hinge so if this console came out of a 68 panel truck then was not the original console and it would have came out of a 73 and up. 69-72 had the blue emblem and the single hinge. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

12-20-2012, 10:29 PM	#8
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Cup Holder Console Yep you're right PT. it's a later model, I thought it was a single hinge when I first saw it. Posted via Mobile Device

12-20-2012, 11:26 PM	#9
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Re: Cup Holder Console Thanks for the info guys.I guess I should drop price and list it in the correct section of the forum.I was just going by what my friend told when I got the console from him.It was in his 68 panel make an offer,I will not be offended __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668

12-20-2012, 11:57 PM	#10
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Cup Holder Console This forum would be the best bet for you to sell the console and you have to keep in mind that shipping will run you in the 30-40 dollar range if you pack it well in the correct size box. That price is in the lower 48 and if you go to Canada it will run you in the 50's. I have sent these all over the US and Canada and those prices are spot on to what it will cost you. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

12-21-2012, 08:20 AM	#11
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Re: Cup Holder Console I will take $100 plus shipping or $100 local pick up __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668

12-21-2012, 08:28 AM	#12
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Cup Holder Console hey flint, i'm interested. could you check shipping to 48001 please? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-22-2012, 10:15 AM	#14
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Cup Holder Console i have to pass Flint. sorry, but merry christmas, __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.