Brothers Trucks Door & Window Weatherstripping? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 09-08-2014, 08:04 PM

Brothers is having a rather large sale and I was curious if these weatherstripping Items are any good? I have a '70 C10 and want to keep the wing windows. I also would like to not have to slam the doors as it will be a daily driver.

http://www.brotherstrucks.com/prodin...CS0072&wlqty=1

http://www.brotherstrucks.com/prodin...WW0072&wlqty=2

http://www.brotherstrucks.com/prodin...FS6772&wlqty=2

**Grumpy old man** · 09-08-2014, 08:32 PM

Seems a lot of guys like precision gaskets and you might want to check what brand those are ,JC Witney sells the precision gaskets and the prices are low .Most any new gasket will make your doors harder to close at first and you may have to adjust the door striker until they settle .

Sean1985 · 09-08-2014, 11:07 PM

I used the brothers window channel kit. I thought it was good. I don't have a tremendous amount of knowledge in weatherstripping but I would buy it again.

Nitis · 09-08-2014, 11:14 PM

Window kit was fine however I missed ordering the wing windows and not sure I want to open that can of works again right now

I'm satisfied with my door to cab seal kit however I would like to try the push on set from gmc Paul's. The glueing and taping was tedious. As for closing the doors you need to give them a little push if you just let them close they will only catch the first latch. Over time they are getting better.

Again only reason I would use another is to compare for myself

09-08-2014, 08:04 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 884	Brothers Trucks Door & Window Weatherstripping? Brothers is having a rather large sale and I was curious if these weatherstripping Items are any good? I have a '70 C10 and want to keep the wing windows. I also would like to not have to slam the doors as it will be a daily driver. http://www.brotherstrucks.com/prodin...CS0072&wlqty=1 http://www.brotherstrucks.com/prodin...WW0072&wlqty=2 http://www.brotherstrucks.com/prodin...FS6772&wlqty=2 __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

09-08-2014, 08:32 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Brothers Trucks Door & Window Weatherstripping? Seems a lot of guys like precision gaskets and you might want to check what brand those are ,JC Witney sells the precision gaskets and the prices are low .Most any new gasket will make your doors harder to close at first and you may have to adjust the door striker until they settle .

09-08-2014, 11:07 PM	#3
Sean1985 Registered User Join Date: Dec 2013 Location: Carlsbad Posts: 133	Re: Brothers Trucks Door & Window Weatherstripping? I used the brothers window channel kit. I thought it was good. I don't have a tremendous amount of knowledge in weatherstripping but I would buy it again.

09-08-2014, 11:14 PM	#4
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Brothers Trucks Door & Window Weatherstripping? Window kit was fine however I missed ordering the wing windows and not sure I want to open that can of works again right now I'm satisfied with my door to cab seal kit however I would like to try the push on set from gmc Paul's. The glueing and taping was tedious. As for closing the doors you need to give them a little push if you just let them close they will only catch the first latch. Over time they are getting better. Again only reason I would use another is to compare for myself



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.