![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Headers on my 64 C-10
Hi all,
Looking to install some headers on my big block. I don't think I have much room in there and want to install some noise makers. I have a 1964 C-10 that I pulled the six and installed a 1978 454. Now I'm looking close to being ready to install. Any suggestions? Thanks for the information! ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: Headers on my 64 C-10
It depends on what engine mounts you are using and whether you have lowered the front of your truck. On my '66 Suburban I used '73-'87 headers. Regardless of which headers you use, you will still have to trim the top flange of the frame.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Thanks Captainfab! I can always count on you!
|
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Quote:
It's still stock 64 C10 suspension. So your saying if I get some headers installed into it I might run into some problems later if I decide to lower it? Any recommendations on what type of headers to use so if at some point I decide to lower it that it doesn't cause me issues? Thanks Captainfab! ![]() |
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Headers on my 64 C-10
Some headers hang lower than others and that is the problem with going lower. I used chevelle headers when I did my 64 many years ago. They tucked up pretty good. There have been several threads in this and the engine section covering this. I would do a search in both sections.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2015
Location: Montevallo, AL
Posts: 272
|
Re: Headers on my 64 C-10
I used one set off of a 70 Chevelle that worked well on mine and I used a second set later on that fit like crap. Both had to have some work done on the upper flange of the frame. Unfortunately I don't remember the brand name. Both were with stock motor mounts.
|
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Quote:
![]() |
|
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Quote:
![]() ![]() |
|
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Quote:
![]() |
|
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Oct 2015
Location: Clackamas, Oregon
Posts: 57
|
Re: Headers on my 64 C-10
Quote:
Thanks again guy. I appreciate all your advice! ![]() |
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Feb 2015
Location: Montevallo, AL
Posts: 272
|
Re: Headers on my 64 C-10
I did not have to cut my engine mounts at all. With the first set, I cut around 3/8-1/2" off the top flange of the driver side frame rail only- just to clear the tube off of #1. The second set required more of the flange to be cut out.
If you are ambitious, you could build a set. I built mine to route outside the frame rails on each side. The muffler sits under the cab and the exhaust exits in front of the rear wheel. I like this routing better than any other I have had. |
![]() |
![]() |
![]() |
#12 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: Headers on my 64 C-10
The Chevelle headers will work most of the time, with an auto trans. But there is a current thread in Engine and Drivetrain where a guy is having issues with his truck and Chevelle headers. Then again as PGSigns said, there are several threads about using Chevelle headers on a BBC in these trucks.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
exhaust, headers |
|
|