Switching my sm465 to a nv4500 in a 1969 Chevy C20

[treveiger]

I've looked around and havent been able to find the information i need. Ive never messed with a tranny swap or anything like that and i was wondering what would i all need to do the swap(parts, what will work and what wont). What kind of nv4500 should i look for year, model, and what trucks would they be in. Has anybody ever swaped one like this, do you have a thread or can tell me how an what i will all need? Ive also hears i need to switch to a hydro clutch is this true? how hard is it? By the way my truck is 2wd.
Thanks.

[GMCBubba]

i just subscribed to this thread because i'm interested in a similar conversion. check out this website: http://advanceadapters.com/product/2225/712576.html

i think this adapter eliminates the need to use hydraulic clutch. my understanding from previous reading is that the conversion (at least for me since i only have 2wd) is pretty straightforward...

[treveiger]

Ya ive been trying to find out which tranny i want an this seems like the best deal for the price an have searched for hours but i must be doing something wrong lol. Are you thinking about the nv4500? I saw that from AA but im going to call them just to make sure, i dont want to switch to hydro clutch. When i do this conversion i will have a thread all about it an pictures an even a video once i know what i all need lol.

[treveiger]

I found something about the tranny but not exactly what i need but its a start.

http://67-72chevytrucks.com/vboard/s...00+swap:chevy:

[raycow]

Originally Posted by GMCBubba

check out this website: http://advanceadapters.com/product/2225/712576.html

i think this adapter eliminates the need to use hydraulic clutch. my understanding from previous reading is that the conversion (at least for me since i only have 2wd) is pretty straightforward...

Yes, you can do it that way, but IMO a better solution is to use a Dodge NV4500 with this adapter
http://advanceadapters.com/product/2202/712550.html

This way, you get to keep your stock clutch linkage, starter, AND bellhousing mounts.

Ray

[treveiger]

Originally Posted by raycow

Yes, you can do it that way, but IMO a better solution is to use a Dodge NV4500 with this adapter
http://advanceadapters.com/product/2202/712550.html

This way, you get to keep your stock clutch linkage, starter, AND bellhousing mounts.

Ray

Wouldnt that bring the tranny back a few inches? I dont understand how a adapter like that would hook up without problems. With the new bellhousing wouldnt you be able to keep your stock clutch linkage, and starter?

[raycow]

Originally Posted by treveiger

Wouldnt that bring the tranny back a few inches? I dont understand how a adapter like that would hook up without problems. With the new bellhousing wouldnt you be able to keep your stock clutch linkage, and starter?

That plate is about 1" thick, which is the length difference between the Mopar and GM input shafts. It just bolts between the transmission and your stock bellhousing. That only other mod you would need to do besides the driveshaft is to enlarge the hole for the shifter.

The aftermarket bellhousing DOES NOT have any provision for the stock truck crossmember mounts or for mounting your stock starter on it. You would have to use a block-mounted starter, with all of its potential (and actual) problems. I believe that bell was actually intended for GM engine swaps into jeeps, and I don't know if it will work with the stock GM truck fork.

Ray

[treveiger]

Originally Posted by raycow

That plate is about 1" thick, which is the length difference between the Mopar and GM input shafts. It just bolts between the transmission and your stock bellhousing. That only other mod you would need to do besides the driveshaft is to enlarge the hole for the shifter.

The aftermarket bellhousing DOES NOT have any provision for the stock truck crossmember mounts or for mounting your stock starter on it. You would have to use a block-mounted starter, with all of its potential (and actual) problems. I believe that bell was actually intended for GM engine swaps into jeeps, and I don't know if it will work with the stock GM truck fork.

Ray

So what year of dodge tranny should i look for? Would they hook up to my mechanical speedometer without switching anything? Is there anything i need to keep in mind with doing this swap? I think im going to go with the dodge nv4500 an use the adapter plate you recomended, its cheaper an looks easier to install lol. Would i have to move or modify the transmission crossmember with this swap, and if so what would i need to do? Thanks Ray i really appreciate all the help with me looking for a tranny with overdrive.
Thank you everyone.

[LockDoc]

-
While you are waiting you can type in NV4500 into the google search box at the top of this page, click on the circle in front of 67-72chevytrucks.com, and click on the Google button. You will have to sort out 2w vs. 4x4 but there is a lot of info.

LockDoc

[68C15]

search around here for NV4500. I know a guy or 2 have done it. you will be OK with your high hump floor. why not go with hydraulic? if you are scared of the bleeding I can help.

have you checked at nordstrom's for a trans?

BTW, are your wheel studs 9/16"? want some long chrome nuts?

also, here is the link I was telling you about.
http://www.csgnetwork.com/multirpmcalc.html

[treveiger]

I checked nordstroms for a tranny from a 93-95 chevy 2500 and they had a rebuilt one for 1050 with a 12 month warrenty. Im not sure what year of tranny would be the best and easiest, im going to call a place today and see if they have a kit for it and how much they are. Are the people that have done the swaps around here and are there truck 2wd? I just dont know much about hydro cltuches and the manual clutch seems more of my taste lol. Im not sure the bolt size of the tires.
Thanks

[Palf70Step]

I'v thought about this in the past. I'll have to watch it more.

[treveiger]

can you use a stock crossmember of a sm465 an just move it back a few inches? Or would i need to completely build a new one or are there ones i can buy that will work?
Thanks.

[RichardJ]

treveiger, You need to do a search on the different versions of the NV4500. The first Chevy versions used a Chevy bolt pattern before switching to the Dodge bolt pattern. The first Chevy versions had a lower 1st gear (Granny low). The offroad guys like that one. The Dodge used a taller 1st gear which is better for the street.
I can't find the info, but I think the early Dodge units had a cable speedometer. The others used an electronic VSS.
You have a SM465 with cast iron bell that has the rear(side) mounts? That is what the 3/4" spacer/adapter is intended for. The bell already has the 5 1/8" retainer hole.

Here is some info.
http://www.offroaders.com/directory/products/NV4500.htm

[JJorgensen52]

I'm in the middle of collecting parts for this swap, hopefully doing it next week in my '69 K10. I am using the AA adapter listed above with the mechanical fork (the fork included is a GM part, the only jeep component is the rubber boot), I am switching to a block mounted starter, and I'm going to be using the original cross-member from the '93 truck I pulled all the parts out of.

Just for some clarification:

There are 3 different varieties of NV4500's:
1. Early GM (late '92 - early '95) - These use a GM specific bolt pattern, external hydraulic clutch slave and have a 6.34 1st and Reverse. This is closest to the SM465, with a 6.55 first. Pilot is .590, 10 spline input shaft and a 6 5/8" stickout (as all GM trannies are). The stock GM bell housing for this uses a passenger's side clutch fork.

2. Late GM ('95+) - These use the same bolt pattern as Dodge, and have a 5.61 1st and Reverse. Same specs otherwise.

3. Dodge - These all have the Dodge bolt pattern, a 5.61 1st / Reverse and have a 10 spline input with a 7 1/4" stickout.

All 3 types have the large diameter 5 1/8" bearing retainer. Around '95, both types switched from a single piece top cover with shifter pinned in to a flat top cover with a bolt on shifter. The GM and Dodge top covers are different.

I can't speak to the 2wd guys (and the iron bellhousing mounts), but I am using the AA bellhousing for early GM NV4500 to Gen I small block. This suits me fine, and as long as you use an Iron nose heavy duty Delco / GM starter (GM part #88863072) block-mounting is not an issue. This uses odd-ball 3 5/8" starter bolts (GM part #3733289).

For the GM NV4500's, the starter is ~6" back from the SM465's. With an adapter plate, you're looking at almost a 7" offset. The GM NV4500 always came mated to an aluminum bellhousing (as did every truck tranny after about '76, I believe). As mentioned above, as long as you use a good quality iron-nose starter, the starter alignment isn't an issue, so unless those rear mounts are critical I would not use the adapter plate, myself.

For 4x4 trucks:
There are various adapters available but all the NV4500's were originally linked to NP241 transfer cases, with a 6" circular bolt pattern common to late model GM's. The Dodge case has a slightly different orientation but either will work.

The other advantage to a Dodge case is the availability of a cast-iron tail housing, which allows for the use of heavy-duty (meaning heavy weight) transfer cases.

Also, there is a heavy duty Dodge version (diesel as mentioned above) which has a bigger input/output shaft and uses an iron top cover. It's not even close to necessary for a regular 1/2 or 3/4 ton truck unless you're going to be doing some crazy wheeling or heavy hauling. The NV4500 (just like the SM465) is way overbuilt and has no trouble handling power.

[treveiger]

Originally Posted by JJorgensen52

I'm in the middle of collecting parts for this swap, hopefully doing it next week in my '69 K10. I am using the AA adapter listed above with the mechanical fork (the fork included is a GM part, the only jeep component is the rubber boot), I am switching to a block mounted starter, and I'm going to be using the original cross-member from the '93 truck I pulled all the parts out of.

Just for some clarification:

There are 3 different varieties of NV4500's:
1. Early GM (late '92 - early '95) - These use a GM specific bolt pattern, external hydraulic clutch slave and have a 6.34 1st and Reverse. This is closest to the SM465, with a 6.55 first. Pilot is .590, 10 spline input shaft and a 6 5/8" stickout (as all GM trannies are). The stock GM bell housing for this uses a passenger's side clutch fork.

2. Late GM ('95+) - These use the same bolt pattern as Dodge, and have a 5.61 1st and Reverse. Same specs otherwise.

3. Dodge - These all have the Dodge bolt pattern, a 5.61 1st / Reverse and have a 10 spline input with a 7 1/4" stickout.

All 3 types have the large diameter 5 1/8" bearing retainer. Around '95, both types switched from a single piece top cover with shifter pinned in to a flat top cover with a bolt on shifter. The GM and Dodge top covers are different.

I can't speak to the 2wd guys (and the iron bellhousing mounts), but I am using the AA bellhousing for early GM NV4500 to Gen I small block. This suits me fine, and as long as you use an Iron nose heavy duty Delco / GM starter (GM part #88863072) block-mounting is not an issue. This uses odd-ball 3 5/8" starter bolts (GM part #3733289).

For the GM NV4500's, the starter is ~6" back from the SM465's. With an adapter plate, you're looking at almost a 7" offset. The GM NV4500 always came mated to an aluminum bellhousing (as did every truck tranny after about '76, I believe). As mentioned above, as long as you use a good quality iron-nose starter, the starter alignment isn't an issue, so unless those rear mounts are critical I would not use the adapter plate, myself.

For 4x4 trucks:
There are various adapters available but all the NV4500's were originally linked to NP241 transfer cases, with a 6" circular bolt pattern common to late model GM's. The Dodge case has a slightly different orientation but either will work.

The other advantage to a Dodge case is the availability of a cast-iron tail housing, which allows for the use of heavy-duty (meaning heavy weight) transfer cases.

Also, there is a heavy duty Dodge version (diesel as mentioned above) which has a bigger input/output shaft and uses an iron top cover. It's not even close to necessary for a regular 1/2 or 3/4 ton truck unless you're going to be doing some crazy wheeling or heavy hauling. The NV4500 (just like the SM465) is way overbuilt and has no trouble handling power.

So your going to go with a gm nv4500 from a 93 truck? Please tell me your going to post a thread on a step by step installation and all the parts your using on this forum lol. Is your truck 2wd?
Thanks

[JJorgensen52]

Originally Posted by treveiger

So your going to go with a gm nv4500 from a 93 truck? Please tell me your going to post a thread on a step by step installation and all the parts your using on this forum lol. Is your truck 2wd?
Thanks

Yep, 1993 NV4500. Came from a 1 ton diesel GM pickup.

And yes, I will be posting details once I finish the swap.

[72smoker]

I am in the prosses of doing a cummins/2 wd swap into a my 72 c-20 and I know that the dodge cummins 4500 is more stout than the gas chevy/ dodge 4500. I had to convert mine to the bigger input and output shafts. I think that you might be able to take the block adapter plate and bell housing from a newer chevy and make it work, depending on the motor. I'll have to let you know how the whole mouting for the hydro set-up works vs the manual clutch. I think that it will be easier to mount and fab than the manual clutch setup. I know that in the diesel's they use the hydro set up because of the force that it takes to push the chutch in. I eaven had to upgrade the hydro systume for the dd clutch that I'm running. I dont think that the cross member will work with the nv4500 either, it looks to high to me? Don't know if I helped.

[Jacfourteen]

suscribed!

[treveiger]

What about a crossmember out of a 71 cheyenne 2wd automatic? Do you have any pictures of a 4x4 crossmember so i know what im exactly looking for?
Thanks

[treveiger]

What about the drive shaft, what kind of modifications would that need if i went with a dodge nv4500, i know i need to shorten it but was thinking about going with one piece anyway. The year i think i need is a 93-97 gas dodge truck, is that correct or is there a eaiser year? Any information would be great.
Thanks

[JJorgensen52]

Originally Posted by treveiger

What about a crossmember out of a 71 cheyenne 2wd automatic? Do you have any pictures of a 4x4 crossmember so i know what im exactly looking for?
Thanks

A 2wd crossmember would also work; my preference would be the 4wd crossmember simply because it bolts to both the top and bottom of the frame rails, making it a better reinforcement.

The pictures I posted of my modified crossmember are of a stock 4x4 member, I modified only one side of it and added the platform mount in the center. Haven't got any pre-mod pictures I can upload right now

Originally Posted by treveiger

What about the drive shaft, what kind of modifications would that need if i went with a dodge nv4500, i know i need to shorten it but was thinking about going with one piece anyway. The year i think i need is a 93-97 gas dodge truck, is that correct or is there a eaiser year? Any information would be great.
Thanks

It's impossible to say for sure what length you're going to need, but you will need it shortened as both Dodge and GM units are considerably longer than the old SM465 was.

Your info about the dodge is correct; you don't want diesel because of the oversized input shaft.

Whichever box you chose, you're going to need a driveshaft yoke that matches the transmission (be it a slip yoke or fixed). I had a new driveshaft made for my truck, including a new slip-yoke for the transmission and a new rear-end pinion yoke as well, for about $360. If you have a serviceable tranny yoke and keep your stock pinion yoke, make that $150.

My driveshaft (factory) was 54 1/2", my new one is 36 1/2". I've heard you can safely run a one piece driveshaft up to 72", but I don't think I've ever seen a factory one past about 58". I would check with a local drivetrain shop on that count.

[treveiger]

JJorgensen52 Thank you , i keep coming up with more questions lately as i do more research. So my local drivetrain shop would be able to tell me what i all exactly need? Why did you decide to go with a GMC NV4500 other than a NV4500 from a dodge?
Thanks

[JJorgensen52]

Originally Posted by treveiger

JJorgensen52 Thank you , i keep coming up with more questions lately as i do more research. So my local drivetrain shop would be able to tell me what i all exactly need? Why did you decide to go with a GMC NV4500 other than a NV4500 from a dodge?
Thanks

Having the questions now is better than halfway through the swap - I know that one from experience - I spent a good 10 months doing research into this swap before I made one single phone call looking for parts.

Yep, a drivetrain place should be able to help you match up all the yokes, seals and driveshaft parts once you decide what tranny to use.

I am using a GM NV4500 primarily because I wanted to get the lower ratios that dodge never offered. I loved my SM465, just the lack of an overdrive was killing me as I've been doing more highway driving lately - so I chose the 6.34 GM box to be as close to original as possible.

It also made my swap (read 4x4) a bit easier because of the transfer case I decided to use.

[treveiger]

I did a little research on it to make sure i got it right and these were the best sites i used to compare the 465 to the 4500

http://en.wikipedia.org/wiki/New_Ven...0_transmission

http://www.novak-adapt.com/knowledge/sm465.htm

From what i understand the easiest swap is the 1993-1997(that way you still get the Gear drive speedometer in tailhousing)after 97 there is no speedometer gear instead they have the VSS in axle.

Make sure you get the standard duty instead of the heavy duty one because the swap is harder, those two websites will help on any info or questions you have and of course if you have anymore questions this site and thread is great to

If anybody has anymore info please feel free to chime in!!!