Last painting for the year. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

In The Ten Ring · 10-09-2017, 01:39 AM

I tried and just love Eastwood Chassis Primer and Extreme Chassis paint. I followed the directions to a "T" yesterday and the results are so good I want to use it on everything going forward (that needs to be satin black anyway).

Definitely need a blasting cabinet as these were all blasted (thank you Jeff's Bowties) and it seems to have really made an adhesion difference. No more electrolysis for me!

But that ends any truck painting for the year.

**special-K** · 10-09-2017, 08:56 AM

Sandblasted surely is an excellent aid to adhesion, besides getting all rust out of nooks and crannies. Eastwood offers great stuff. They are a quality restoration supplier from a good way back. But, if it has Eastwood on the label, you can be sure to find the same product for much cheaper from the company that made the product, since Eastwood isn't a chemical company.

midniteblues · 10-09-2017, 10:14 AM

A few months ago I started working for the company that blasted the frame on my 67.
They only did the frame and heavy suspension parts and the bed cross sills.
Everything else including the cab I did at home in my little cabinet and my hf pot.

It certainly is the way to go cause your starting over with fresh metal.
If I could recoup the time I spent with my small setups I would be weeks ahead. But the cash I have into all my equip. Is about what the frame and peices cost to have done.

That was a lot of painting too

In The Ten Ring · 10-09-2017, 12:52 PM

Oh yes, I should have found someone to sand blast my parts for me, the electrolysis was effective and fun to do, giving me pride and experience in being self-sufficient, but it doesn't rough up the surface so I have had minor bumps cause the paint to flake off.

I could have had the local tech college use their blasting cabinet to do all the brackets......but I really wanted to explore electrolysis. Now their cabinet is toast (I saw it last week, it's been abused severely) so I will just have to clean up the garage and make room for a cabinet next summer.

But this did turn out great, these 7 parts.....I am still amazed.

**special-K** · 10-09-2017, 08:34 PM

Sandblasting parts can be an addiction. I have a guy do my big stuff because his price is right and sandblasting is a nasty thing. Take a 45 year old wheel and make it look brand new with ease

10-09-2017, 01:39 AM	#1
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Last painting for the year. I tried and just love Eastwood Chassis Primer and Extreme Chassis paint. I followed the directions to a "T" yesterday and the results are so good I want to use it on everything going forward (that needs to be satin black anyway). Definitely need a blasting cabinet as these were all blasted (thank you Jeff's Bowties) and it seems to have really made an adhesion difference. No more electrolysis for me! But that ends any truck painting for the year. Last edited by In The Ten Ring; 10-09-2017 at 02:09 AM.

10-09-2017, 08:56 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Last painting for the year. Sandblasted surely is an excellent aid to adhesion, besides getting all rust out of nooks and crannies. Eastwood offers great stuff. They are a quality restoration supplier from a good way back. But, if it has Eastwood on the label, you can be sure to find the same product for much cheaper from the company that made the product, since Eastwood isn't a chemical company. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-09-2017, 10:14 AM	#3
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Last painting for the year. A few months ago I started working for the company that blasted the frame on my 67. They only did the frame and heavy suspension parts and the bed cross sills. Everything else including the cab I did at home in my little cabinet and my hf pot. It certainly is the way to go cause your starting over with fresh metal. If I could recoup the time I spent with my small setups I would be weeks ahead. But the cash I have into all my equip. Is about what the frame and peices cost to have done. That was a lot of painting too __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

10-09-2017, 12:52 PM	#4
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Last painting for the year. Oh yes, I should have found someone to sand blast my parts for me, the electrolysis was effective and fun to do, giving me pride and experience in being self-sufficient, but it doesn't rough up the surface so I have had minor bumps cause the paint to flake off. I could have had the local tech college use their blasting cabinet to do all the brackets......but I really wanted to explore electrolysis. Now their cabinet is toast (I saw it last week, it's been abused severely) so I will just have to clean up the garage and make room for a cabinet next summer. But this did turn out great, these 7 parts.....I am still amazed.

10-09-2017, 08:34 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Last painting for the year. Sandblasting parts can be an addiction. I have a guy do my big stuff because his price is right and sandblasting is a nasty thing. Take a 45 year old wheel and make it look brand new with ease Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.