1972 Jimmy - Brake Light Continuity bad 1 side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimmywhale · 05-13-2016, 07:17 PM

Howdy All,

I have a Brake light problem I was wondering if anyone could shed some light on. The right hand brake light is out, running lights work fine on both sides. I checked the socket, bulbs are all good.

What might cause the brake continuity to go out on one side only ? Anyone had a similar issue ?

Cheers,
James.

ls1nova71 · 05-13-2016, 08:10 PM

Could be several things, bad wire somewhere, or bad turn signal switch come to mind. Do both turn signals work?

**lks dcvn** · 05-13-2016, 08:56 PM

If you can swap bulbs per side and they work on only one side...I would say bad ground or wire somewhere.

jimmywhale · 05-13-2016, 10:34 PM

Thanks ls1nova71 - Ill have to run the right hand side back from the socket. I have had an intermittent problem with the turn signals so I'm guessing related.

jimmywhale · 05-13-2016, 10:35 PM

Thanks lks dcvn,

I have indeed put he left bulb on the right and same result. No continuity on the RHS. Will continue to check out the ground situation.

87Skier · 05-16-2016, 05:55 AM

I believe the power for the brake lights goes through the column (since they are turn signals as well). If your issue isn't at the back, I would be looking at the turn signal switch.

05-13-2016, 07:17 PM	#1
jimmywhale Registered User Join Date: May 2016 Location: California Posts: 3	1972 Jimmy - Brake Light Continuity bad 1 side Howdy All, I have a Brake light problem I was wondering if anyone could shed some light on. The right hand brake light is out, running lights work fine on both sides. I checked the socket, bulbs are all good. What might cause the brake continuity to go out on one side only ? Anyone had a similar issue ? Cheers, James.

05-13-2016, 08:10 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: 1972 Jimmy - Brake Light Continuity bad 1 side Could be several things, bad wire somewhere, or bad turn signal switch come to mind. Do both turn signals work? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

05-13-2016, 08:56 PM	#3
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,342	Re: 1972 Jimmy - Brake Light Continuity bad 1 side If you can swap bulbs per side and they work on only one side...I would say bad ground or wire somewhere.

05-13-2016, 10:34 PM	#4
jimmywhale Registered User Join Date: May 2016 Location: California Posts: 3	Re: 1972 Jimmy - Brake Light Continuity bad 1 side Thanks ls1nova71 - Ill have to run the right hand side back from the socket. I have had an intermittent problem with the turn signals so I'm guessing related.

05-13-2016, 10:35 PM	#5
jimmywhale Registered User Join Date: May 2016 Location: California Posts: 3	Re: 1972 Jimmy - Brake Light Continuity bad 1 side Thanks lks dcvn, I have indeed put he left bulb on the right and same result. No continuity on the RHS. Will continue to check out the ground situation.

05-16-2016, 05:55 AM	#6
87Skier Registered User Join Date: Mar 2014 Location: Corvallis, OR Posts: 712	Re: 1972 Jimmy - Brake Light Continuity bad 1 side I believe the power for the brake lights goes through the column (since they are turn signals as well). If your issue isn't at the back, I would be looking at the turn signal switch. __________________ 1972 GMC Jimmy Custom 4.8L (L20)/6L90E/NP205 1989 Chevy Suburban V2500 350/Turbo 400/4.11 gears 1996 Chevy Suburban K1500 350/4L60E



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.