The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-17-2002, 04:54 PM   #1
nosto
Flamin' Bass
 
nosto's Avatar
 
Join Date: Aug 2001
Location: Galloway, NJ, US
Posts: 315
10.5cfm for $250 ??

Was browsing through the local Sears. Stopped by the air compressors and saw their <DeVilbiss, vertical, black, single stage, 60gal, 135psi> $499 model #18417 on clearance for
$249.99.

Of course they don't have any more in stock, can't order any, and the nearest 5 Sears stores don't have any either.

But, if you're looking for a compressor, this seems to be a decent size for the price.

That is, if you can find a store that still has one.

Cheers,
Rick/nosto/
Still lookin' for more cfm
nosto is offline   Reply With Quote
Old 10-17-2002, 05:56 PM   #2
crazy4chevs
Registered User
 
crazy4chevs's Avatar
 
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
I have a 7 hp 60 gallon single stage compressor 135 psi.

(wish I would've got a two stage )

You should check to see if its a two stage or not. Two stages are far superior- less wait time, with little more investment. Remember its a tool you should buy one for life not to get you by and replace in a few years.


I should have read your post slower, I see it's a single stage. Not a bad price though!
__________________
70 chev c10 swb fleet
72 grill, sb 400, 2/4 drop.

68 chev c10 swb fleet
Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C
Classic GM Truck Club of Washington



.

Last edited by crazy4chevs; 10-17-2002 at 05:59 PM.
crazy4chevs is offline   Reply With Quote
Old 10-17-2002, 09:40 PM   #3
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,403
I have a 5 hp/ 2 stage/80 gal tank, 18 cfm @ 175 psi, it wasnt cheap at $1200.......but i have been workin the nuts off it for 15 yrs! alot of the "high end"air tools like a die grinder take about 12 cfm to run , & sand blasting really eats the air! I have a pressurized blaster canister that i use for small parts, & have a little wait time while blasting. watch out for the 'oiless " compressors(sealed pump), that you cant add or change oil in.....they are a throw away item & a lot of the cheaper units are set up this way. Take a look at the air tools you plan to use, & get an idea what you need for compressor sizing, then be prepaired to spend a little extra cash.......in the long run you will be happier. good luck......crazy longhorn
crazy longhorn is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com