The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-22-2016, 04:36 PM   #1
52ratrod
Registered User
 
Join Date: Apr 2015
Location: Cold lake alberta
Posts: 31
Question Using UMI performance A-arms on S10 frame swap

Hey guys, First thank you to everyone that has posted. all his information helps so many of the newbies. I have a question about a s10 swap I'm going to be doing on my 52 chevy 1300 3 window. I know that with the front end that not only to replace the bushings and all other worn parts that normally a 2" wheel spacer is used to bring the wheels closer to the fenders

I want to go with a more modern look and upgrade my a-arms to the umi performance a-arms they offer.

Has anyone ever gone to a tubular a-arm and which one to avoid using a wheel spacer?

Thanks

Dallas

Last edited by 52ratrod; 05-22-2016 at 04:38 PM. Reason: misspelling
52ratrod is offline   Reply With Quote
Old 05-22-2016, 08:46 PM   #2
Coupeguy2001
Registered User
 
Coupeguy2001's Avatar
 
Join Date: Aug 2011
Location: phoenix az
Posts: 723
Re: Using UMI performance A-arms on S10 frame swap

check speedway in Lincoln Nebraska. Checkout their race car catalog,
They have dimensions and u-build-it ones.
Coupeguy2001 is offline   Reply With Quote
Old 05-23-2016, 11:41 PM   #3
tmoble
Registered User
 
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
Re: Using UMI performance A-arms on S10 frame swap

UMI stuff is good, but you'll need both upper and lower arms to match. You'll also need longer tie-rods.

If you really,really want to do this Speedway Motors would be a good place to start.

Maybe deeper offset wheels?
tmoble is offline   Reply With Quote
Old 05-24-2016, 12:15 AM   #4
52ratrod
Registered User
 
Join Date: Apr 2015
Location: Cold lake alberta
Posts: 31
Re: Using UMI performance A-arms on S10 frame swap

Quote:
Originally Posted by tmoble View Post
UMI stuff is good, but you'll need both upper and lower arms to match. You'll also need longer tie-rods.

If you really,really want to do this Speedway Motors would be a good place to start.

Maybe deeper offset wheels?
Im going to do a frame swap with a 2002 extended cab so once I can get my hands on a ford 9" or s10 4x4 rear end to update the brakes and change the stock rear end ratio.

From what I can read on is that spacers are needed on the front to even it to rear once I get a wider rear mounted.

If I go with umi top and bottom a-arms and drop spindles will that bring me out enough so front spacers are not needed.
52ratrod is offline   Reply With Quote
Old 05-24-2016, 12:39 AM   #5
tmoble
Registered User
 
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
Re: Using UMI performance A-arms on S10 frame swap

>>> From what I can read on is that spacers are needed on the front to even it to rear once I get a wider rear mounted.

Sounds a little strange, maybe you investigate this further.

UMI stuff will be stock width.

I think you'd be money and work ahead to use a narrower rear that's similar to the stock width. re-engineering a front suspension and steering is not an easy (or smart) deal. There's lots of stuff available to make this work, no need to re-invent the wheel here.
tmoble is offline   Reply With Quote
Old 05-24-2016, 11:04 AM   #6
52ratrod
Registered User
 
Join Date: Apr 2015
Location: Cold lake alberta
Posts: 31
Re: Using UMI performance A-arms on S10 frame swap

Michigan metal works offers upper and lower a arms from 1.5 to 3 inch each side and relocate the shock off the frame through the upper to connect to the lower. Has anyone had success with these?
52ratrod is offline   Reply With Quote
Reply

Bookmarks

Tags
performance, s10 swap, suspension, umi


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com