Do they sell complete bed sides or just skins? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gregski** · 03-22-2022, 11:59 AM

Hi all just another dude looking for sum proper 68-72 short box sides, mine are beat to hell, what I have seen over the years is that there is like one or two makers of after market parts and everyone and their mum just resells the same junk, so my question is: them $600 dollar bed sides I keep seeing those are just for the outter skins? I figure I ask as the pics do not show a 360° view just the outter sides

I ask cause if I'm about to cut, weld and grind, I might as well pound what I gots into submission and cover it up with a gallon or two of bondo, Craigslist Style!

please and thank you,
G

Thealien · 03-22-2022, 12:39 PM

I am pretty sure full bedsides are available. They are for the Blazers. I’m also sure that someone else will chime in to confirm or disagree.

**Gregski** · 03-22-2022, 01:20 PM

found this on Auto Metal Direct for $700 (and $270 to ship!!!) not sure if they are all like that now

Bedside - OE Style - LH - 68-72 Chevy GMC C/K Fleetside Short Bed Pickup

**LockDoc** · 03-22-2022, 02:43 PM

-
I think all of the full bed sides are complete with the inner and outer panels. The ones I bought from "Classic Parts" were for sure. They were $500 each when I bought them.

LockDoc

**Gregski** · 03-22-2022, 03:01 PM

Quote:

Originally Posted by LockDoc

-
I think all of the full bed sides are complete with the inner and outer panels. The ones I bought from "Classic Parts" were for sure. They were $500 each when I bought them.

LockDoc

thanks Leon I like Classic Parts have been buying from them for years, they are now $625 a piece plus $55 for tax and no idea how much for shipping

**Grumpy old man** · 03-22-2022, 03:47 PM

Buy Auto metal direct AMD thru summit for the best deal and low cost shipping .

**Gregski** · 03-22-2022, 05:36 PM

Quote:

Originally Posted by Grumpy old man

Buy Auto metal direct AMD thru summit for the best deal and low cost shipping .

good tip, $630 from them plus $55 tax and $134 for shipping, but they may be just close enough to me 134 miles to drive up there and pick these up, though gas prices are crazy right now

**CarlsLQ9SS** · 03-23-2022, 07:11 AM

I got my bed sides from lmc and was complete with the inner panel and they waved the shipping costs because I bought both sides. They was in nice shape, no damage from shipping and fit really well to my factory bed floor. I ordered my tailgate from summit because LMC didn't have it in stock at the time, it wasn't packaged as well as my bedsides and had a few dents and dings from shipment. It may also be the difference in freight shipping and FedEx or ups, freight I think is more careful. The figment of the tailgate wasn't very good but I'm sure most of our truck parts are made at a couple different places. Anyhow the shipped price on my bedsides in December was just over $1,100.

**special-K** · 03-23-2022, 08:19 PM

I don't know of any bedside skins ever being made in reproduction. I'm not sure GM ever sold just skins

cj847 · 03-23-2022, 09:55 PM

Some of the vendors will bring your order to a show if there is a big one in your area. However, some of them may not stock them and are just drop shippers from the manufacturer.

03-22-2022, 11:59 AM	#1
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Do they sell complete bed sides or just skins? Hi all just another dude looking for sum proper 68-72 short box sides, mine are beat to hell, what I have seen over the years is that there is like one or two makers of after market parts and everyone and their mum just resells the same junk, so my question is: them $600 dollar bed sides I keep seeing those are just for the outter skins? I figure I ask as the pics do not show a 360° view just the outter sides I ask cause if I'm about to cut, weld and grind, I might as well pound what I gots into submission and cover it up with a gallon or two of bondo, Craigslist Style! please and thank you, G Attached Images

03-22-2022, 12:39 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: Do they sell complete bed sides or just skins? I am pretty sure full bedsides are available. They are for the Blazers. I’m also sure that someone else will chime in to confirm or disagree. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

03-22-2022, 01:20 PM	#3
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: Do they sell complete bed sides or just skins? found this on Auto Metal Direct for $700 (and $270 to ship!!!) not sure if they are all like that now Bedside - OE Style - LH - 68-72 Chevy GMC C/K Fleetside Short Bed Pickup Attached Images

03-22-2022, 02:43 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,647	Re: Do they sell complete bed sides or just skins? - I think all of the full bed sides are complete with the inner and outer panels. The ones I bought from "Classic Parts" were for sure. They were $500 each when I bought them. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-22-2022, 03:47 PM	#6
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Do they sell complete bed sides or just skins? Buy Auto metal direct AMD thru summit for the best deal and low cost shipping . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

03-23-2022, 07:11 AM	#8
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: Do they sell complete bed sides or just skins? I got my bed sides from lmc and was complete with the inner panel and they waved the shipping costs because I bought both sides. They was in nice shape, no damage from shipping and fit really well to my factory bed floor. I ordered my tailgate from summit because LMC didn't have it in stock at the time, it wasn't packaged as well as my bedsides and had a few dents and dings from shipment. It may also be the difference in freight shipping and FedEx or ups, freight I think is more careful. The figment of the tailgate wasn't very good but I'm sure most of our truck parts are made at a couple different places. Anyhow the shipped price on my bedsides in December was just over $1,100. __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.

03-23-2022, 08:19 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Do they sell complete bed sides or just skins? I don't know of any bedside skins ever being made in reproduction. I'm not sure GM ever sold just skins __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-23-2022, 09:55 PM	#10
cj847 Registered User Join Date: Sep 2016 Location: Ozark, MO Posts: 567	Re: Do they sell complete bed sides or just skins? Some of the vendors will bring your order to a show if there is a big one in your area. However, some of them may not stock them and are just drop shippers from the manufacturer.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.