The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-13-2014, 04:39 PM   #1
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
New guy to the project world

Hey guys, I was all but given a 1967 C20 Chevy Custom Camper. Everything is ther and the 327 engine seems to run strong. It needs so break work and body work, but over all its not in bad shape. The one thing I am really struggling with is the rear suspension. This truck uses training arms and they need replaced before I can drive it. Does anyone know where I can find some somewhat close to the Dayton Ohio area? All the ones I have found so far are in California.

Thanks for any advice and help, I'm sure I'll have more questions as I get into this old truck.

Tim
Stout Ironworks is offline   Reply With Quote
Old 01-13-2014, 05:00 PM   #2
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

Let's make that trailing arms, instead of training arms.
Stout Ironworks is offline   Reply With Quote
Old 01-13-2014, 06:47 PM   #3
kcsa75
Registered User
 
kcsa75's Avatar
 
Join Date: Oct 2010
Location: Kansas City
Posts: 3,590
Re: New guy to the project world

Looks like your first posts. Welcome to the fray...but
Attached Images
 
__________________
Willie
Swamp Angel Truckers
'72 C10 Highlander


People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.
kcsa75 is offline   Reply With Quote
Old 01-13-2014, 07:42 PM   #4
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

Thanks, and understood, Here is a couple pics, its not the prettiest thing on the road. I'm also having an issue of the engine not getting any fuel. I just put 5 gallons in the tank and there is a new pump installed. Thoughts. It cant be a complex system.

Once the rain stops in a few days I'll be able to spend more time with it.
Attached Images
  
Stout Ironworks is offline   Reply With Quote
Old 01-13-2014, 07:44 PM   #5
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,976
Re: New guy to the project world

NICE!! Welcome to the board stout.
jocko is offline   Reply With Quote
Old 01-13-2014, 07:46 PM   #6
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

Thanks, I don't think I did to bad, I have less than $250 investing in it so far. The camper is usable, just a little dirty. Biggest issues, needs trailing arms, brake cylinder needs rebuild and engine not getting fuel , as of today. Runs great if i pour gas in the carb.
Stout Ironworks is offline   Reply With Quote
Old 01-13-2014, 08:14 PM   #7
SCHRUMGMC
Registered User
 
SCHRUMGMC's Avatar
 
Join Date: Dec 2012
Location: North Carolina
Posts: 4,989
Re: New guy to the project world

Sweet ride STOUT !!! and welcome
__________________
1971 GMC Sierra
1959 GMC 100
SCHRUMGMC is offline   Reply With Quote
Old 01-14-2014, 10:11 AM   #8
Sammy
Registered User
 
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
Re: New guy to the project world

LMC has trailing arms for about $269 a piece plus shipping. Thinking Craigslist in your area or a local parts yard is your best bet. I believe all the trailing arms from the Chevy trucks will fit regardless of year or length of the bed.
Next would be buying from the parts board from someone and eat the shipping.
Depending on how bad your arms are it is possible to split them apart and reinforce them. There are a few threads on that process.
Good luck in your search.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL"


"You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig."

ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"
Sammy is offline   Reply With Quote
Old 01-14-2014, 10:54 AM   #9
hamjet
Registered User
 
hamjet's Avatar
 
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
Re: New guy to the project world

Welcome Stout, thats a nice start, I'd love to rewind the history on it to see the family camping and traveling that was done. The stories it could tell. if it were mine I'd clean it up and freshen up the suspension, fix up the inside of the camper, and away I'd go, just like the prior owners did ....NEAT NEAT!!!!!
__________________
Thanks, Joe..
1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.
hamjet is offline   Reply With Quote
Old 01-14-2014, 12:06 PM   #10
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,242
Re: New guy to the project world

Welcome from Nor Cal. The fuel issue might be the float in the carb stuck up... lightly tap on the bowl with a screwdriver handle and see if it will fall.
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 01-14-2014, 12:11 PM   #11
Dean'smeanmachine
Registered User
 
Dean'smeanmachine's Avatar
 
Join Date: Sep 2013
Location: Mount Morris,NY
Posts: 788
Re: New guy to the project world

nice project. welcome!
__________________
Dean

1972 Custom Camper c/20 5.3 LS swap in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=610187

in God we Trust
Dean'smeanmachine is offline   Reply With Quote
Old 01-14-2014, 01:07 PM   #12
Elliot949
Registered User
 
Elliot949's Avatar
 
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
Re: New guy to the project world

Love it Stout... My truck was originally a White with Blue interior C-20 Custom Camper...
Attached Images
 
Elliot949 is offline   Reply With Quote
Old 01-14-2014, 01:13 PM   #13
MashTheGas 72
Registered User
 
Join Date: Nov 2013
Location: Folkston Ga
Posts: 178
Re: New guy to the project world

Welcome Stout! Very nice Find. You can't beat that deal. As far as fuel are you getting fuel to the carb?
__________________
72 GMC 1/2 Ton
MashTheGas 72 is offline   Reply With Quote
Old 01-14-2014, 01:43 PM   #14
Sleepy Cheyenne
Registered User
 
Join Date: Jul 2013
Location: Olathe, Kansas
Posts: 174
Re: New guy to the project world

Welcome strout, like the camper
Sleepy Cheyenne is offline   Reply With Quote
Old 01-14-2014, 01:56 PM   #15
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

A sticking float in the carb would cause gas not to get past the pump? When I disconnected the fuel line at the carb and crank the engine there is no fuel. I just installed a new fuel pump.

Elliot949 - nice looking truck, I hope to get mine there one day. Right now I just want to get it on the road.

I would love to know more about the history on the truck as well. The guy I got it from remembers camping in it as a kid, but its been sitting for years.
Stout Ironworks is offline   Reply With Quote
Old 01-14-2014, 01:57 PM   #16
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

A sticking float in the carb would cause gas not to get past the pump? When I disconnected the fuel line at the carb and crank the engine there is no fuel. I just installed a new fuel pump.

Elliot949 - nice looking truck, I hope to get mine there one day. Right now I just want to get it on the road.

I would love to know more about the history on the truck as well. The guy I got it from remembers camping in it as a kid, but its been sitting for years.
Stout Ironworks is offline   Reply With Quote
Old 01-14-2014, 02:14 PM   #17
DaHos
Senior Member
 
DaHos's Avatar
 
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,858
Re: New guy to the project world

Nice one Stout! Fuel problem sounds just like my 68 when I got it. Check the soft line under the cab and just before the fuel pump, mine were so bad that they glued themself shut from sitting.......if you are getting fuel to the pump check that the pump push rod didnt fall...... As far as trailing arms, just keep an eye out, someone local has em !
__________________
1967 C10 SWB
Owner - Rustbelt Restorations
DaHos is offline   Reply With Quote
Old 01-14-2014, 02:29 PM   #18
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

I visually checked those lines and they seemed ok, I have some fuel line laying around I may just replace them. I just put the fuel pump in, its possible I didnt get the push rod in right. Ill look into both of those. Thanks
Stout Ironworks is offline   Reply With Quote
Old 01-14-2014, 02:34 PM   #19
chrisestes
Registered User
 
Join Date: Apr 2007
Location: Austin Texas
Posts: 138
Re: New guy to the project world

nice truck
chrisestes is offline   Reply With Quote
Old 01-14-2014, 02:53 PM   #20
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: New guy to the project world

Welcome Stout. You will love it here. It is very addicting.

How long did your truck sit before you got it? How fresh is the gas in the tank?
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 01-14-2014, 02:57 PM   #21
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

Hey TBone, thanks I'm already finding a ton of good info. It's been sitting since 1992, I think. The gas in the tank is new. One of the first things I did was to pull the tank and clean it out the best I could. I want to replace it eventually, but it'll work for now. I added 5 gallons last night.
Stout Ironworks is offline   Reply With Quote
Old 01-14-2014, 04:37 PM   #22
Saclandman
Registered User
 
Saclandman's Avatar
 
Join Date: May 2013
Location: Sacramento, CA
Posts: 487
Re: New guy to the project world

When I got my 67, the fuel pickup line in the tank was completely plugged. When you cleaned the tank, did you pull out the sending unit and blow out the line? Mine also came with a optional filter mounted under the cab along the passanger's side frame rail. Might want to check that too.
__________________
Rich J.

1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD
2002 Chevy Tahoe 4X4 5.3L SOLD
2015 Chevy Silverado Crew 4X4 5.3L
Saclandman is offline   Reply With Quote
Old 01-14-2014, 04:58 PM   #23
67swb72klb
Registered User
 
67swb72klb's Avatar
 
Join Date: Dec 2010
Location: livingston co.mi
Posts: 2,464
Re: New guy to the project world

if you did not check the pickup sock that could be a problem
welcome to the board too!
__________________
California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project
67swb72klb is offline   Reply With Quote
Old 01-14-2014, 08:07 PM   #24
Stout Ironworks
Registered User
 
Join Date: Sep 2013
Location: Dayton Ohio
Posts: 22
Re: New guy to the project world

Quote:
Originally Posted by Saclandman View Post
When I got my 67, the fuel pickup line in the tank was completely plugged. When you cleaned the tank, did you pull out the sending unit and blow out the line? Mine also came with a optional filter mounted under the cab along the passanger's side frame rail. Might want to check that too.

I checked the line in the tank and was able to blow through it. I didn't see a filter under the cab, but I'll check again. I'm going to replace all the rubber fuel line.

Here are a couple more pics of the truck. I found the original tail gate in the camper, and was told it has never been on the truck. Its in amazing shape.

I'm also thinking of selling the camper, I'm not sure if there is much of a market for that sort of thing.
Attached Images
   
Stout Ironworks is offline   Reply With Quote
Old 01-14-2014, 08:17 PM   #25
DaHos
Senior Member
 
DaHos's Avatar
 
Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,858
Re: New guy to the project world

Quote:
Originally Posted by Stout Ironworks View Post
Thanks, I don't think I did to bad, I have less than $250 investing in it so far.

I hope you gave them a kiss on the way out.............

Let me know when I can come pick up my tailgate
__________________
1967 C10 SWB
Owner - Rustbelt Restorations
DaHos is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com