Stripping an anodized grill shell with oven cleaner? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crazy longhorn · 01-13-2003, 08:02 PM

I saw a thread a while back about stripping the anodizing off an alum grill shell with oven cleaner. How well does this work? Also, i would guess it wouldnt be good to leave the stuff on too long.....need advice from anybody who has tried this....crazyL

mikep · 01-13-2003, 08:07 PM

Sodium Hydroxide + Aluminum = Bad Mojo

It'll remove the anodizing all right. It'll probably look like hell afterwards though.

gashog · 01-13-2003, 11:05 PM

I used the oven cleaner methed on both my trucks with good results. spray it on and let it work awhile till the anodizing will come off with steel wool, time depends on temp, the warmer the quicker. steel wool then rinse and then start over till its all dull, after that sand with 400 grit and finish with 1000 grit then hit the buffing wheel. it will shine great but you'll have to polish it with mothers or something from time to time.

Johns70 · 01-13-2003, 11:59 PM

i did mine the same as gashog and it turned out great.

crazy longhorn · 01-14-2003, 12:11 AM

That looks nice gashog! That billet grill reaaly sets it off too

bobs409 · 01-14-2003, 09:56 AM

I've used this method too and it does work. It usually takes 2-3 hits. Do not let it dry on the surface or it's a bear to remove!

Here's a link for a special product to remove annodizing also. I haven't tried it though.

http://bluelightning.zoovy.com/product/ADPT

crazy longhorn · 01-14-2003, 01:48 PM

Thanks for the info guys, the easy off is on the 2nd hit& pretty much took all the anodizing the 1st time! crazyL

ChevLoRay · 01-14-2003, 11:03 PM

So, if the EZ-Off will get the anodized finish off (well, that and some elbow grease), would you want to clear-coat it when you get it nice and shiny? Seems like it would be the right thing, but that may not be the case.

casey · 01-14-2003, 11:22 PM

I heard clear coating is a no no you'll regret it , just us mothers wax

Blue_71 · 01-14-2003, 11:27 PM

ive always heard clear coating is bad, but heres mine after 2 months, and it still looks the same after 7

Blue_71 · 01-14-2003, 11:31 PM

heres the same grill on the 4x4, i forgot i had this one for a 7 month example

crazy longhorn · 01-15-2003, 12:35 AM

Im not sure how this one will go yet. The old grill has a couple bruised areas that I need to bump & file, then block sand. if I can get it straight enough to polish, I probably will just leave it raw & do the elbow grease from time to time. I have also thought about having it powdercoated....crazyL

01-13-2003, 08:02 PM	#1
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Stripping an anodized grill shell with oven cleaner? I saw a thread a while back about stripping the anodizing off an alum grill shell with oven cleaner. How well does this work? Also, i would guess it wouldnt be good to leave the stuff on too long.....need advice from anybody who has tried this....crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-13-2003, 08:07 PM	#2
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	Sodium Hydroxide + Aluminum = Bad Mojo It'll remove the anodizing all right. It'll probably look like hell afterwards though. __________________ No truck :-(

01-13-2003, 11:05 PM	#3
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	I used the oven cleaner methed on both my trucks with good results. spray it on and let it work awhile till the anodizing will come off with steel wool, time depends on temp, the warmer the quicker. steel wool then rinse and then start over till its all dull, after that sand with 400 grit and finish with 1000 grit then hit the buffing wheel. it will shine great but you'll have to polish it with mothers or something from time to time. Attached Images __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

01-13-2003, 11:59 PM	#4
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	i did mine the same as gashog and it turned out great. __________________ 69 chevy short wide box project 70 GMC jimmy project

01-14-2003, 12:11 AM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	That looks nice gashog! That billet grill reaaly sets it off too __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-14-2003, 09:56 AM	#6
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	I've used this method too and it does work. It usually takes 2-3 hits. Do not let it dry on the surface or it's a bear to remove! Here's a link for a special product to remove annodizing also. I haven't tried it though. http://bluelightning.zoovy.com/product/ADPT __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

01-14-2003, 01:48 PM	#7
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Thanks for the info guys, the easy off is on the 2nd hit& pretty much took all the anodizing the 1st time! crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-14-2003, 11:03 PM	#8
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	So, if the EZ-Off will get the anodized finish off (well, that and some elbow grease), would you want to clear-coat it when you get it nice and shiny? Seems like it would be the right thing, but that may not be the case. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-14-2003, 11:22 PM	#9
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	I heard clear coating is a no no you'll regret it , just us mothers wax

01-14-2003, 11:31 PM	#11
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	heres the same grill on the 4x4, i forgot i had this one for a 7 month example Attached Images

01-15-2003, 12:35 AM	#12
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Im not sure how this one will go yet. The old grill has a couple bruised areas that I need to bump & file, then block sand. if I can get it straight enough to polish, I probably will just leave it raw & do the elbow grease from time to time. I have also thought about having it powdercoated....crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.