Finally got it started today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jtrux · 02-18-2007, 07:28 PM

I got my blazer started today fot the first time in two years with it's new engine. Critter and I worked on all day today until about twenty minutes ago and it all came together when she fired up.

Here are the specs (pics soon):
GM goodwrench 260 hp crate motor
Edelbrock performer intake
Carter 625 carb
MSD Pro-billet distributor
MSD Coil
MSD 6AL
Dynomax headers
Accel wires
I guess that's about it.

Of course it was open headers so it was insanely loud but I loved it. We didn't do a full break in on it (because it was so loud and getting late) but ran it for ten minutes at increased RPM. It had great oil pressure and no miss or anything else bad, i'm pretty excited right now and can't wait to drive it.

jkade · 02-18-2007, 07:35 PM

Quote:

Originally Posted by Jtrux

I got my blazer started today fot the first time in two years with it's new engine. Critter and I worked on all day today until about twenty minutes ago and it all came together when she fired up.

Here are the specs (pics soon):
GM goodwrench 260 hp crate motor
Edelbrock performer intake
Carter 625 carb
MSD Pro-billet distributor
MSD Coil
MSD 6AL
Dynomax headers
Accel wires
I guess that's about it.

Of course it was open headers so it was insanely loud but I loved it. We didn't do a full break in on it (because it was so loud and getting late) but ran it for ten minutes at increased RPM. It had great oil pressure and no miss or anything else bad, i'm pretty excited right now and can't wait to drive it.

I hope to feel the glory in the next week.

Critter · 02-19-2007, 09:51 AM

I'm happy we got it going. Glad I could help!

65-72 chevytoys · 02-19-2007, 02:18 PM

You know this was coming

Contratulations on the successful startup

**Yukon Jack** · 02-19-2007, 02:38 PM

Congrats - that is an awesome feeling when you finally get to fire up a project.

Critter · 02-19-2007, 04:43 PM

Quote:

Originally Posted by 65-72 chevytoys

You know this was coming

Contratulations on the successful startup

He's got a point there. You are always asking others for pics. Time for you to step up!

LUV2XCLR8 · 02-19-2007, 05:03 PM

AND

Jtrux · 02-19-2007, 08:08 PM

Point taken, I'll take some pics tomorrow and post them right away. It's not pretty yet cuz the pulleys and brackets still haven't been painted but it works so that's all that matters.

70gmcjimmy · 02-20-2007, 08:58 PM

Man, its tomorrow now and still no pics! Seriously tho there just aint nuthin smells better than the first fire-up on an engine! Gaskets and fresh paint burnin in, maybe shes a little rich---WOOOHOO!! And ya did er with open headers-it just dont get no better than that.

Later---DAC

Big J · 02-20-2007, 10:55 PM

I remember my first time, giggled like a little kid. Then I realized it was missing and running rough..... That part sucked but it was still cool that it started..... Congrats on yours...

Critter · 02-20-2007, 10:59 PM

Quote:

Originally Posted by 70gmcjimmy

Man, its tomorrow now and still no pics! Seriously tho there just aint nuthin smells better than the first fire-up on an engine! Gaskets and fresh paint burnin in, maybe shes a little rich---WOOOHOO!! And ya did er with open headers-it just dont get no better than that.

Later---DAC

Oh yeah it is still open headers. The poeple around him are LOVING IT! Im sure he's gonna get kicked out of the community pretty quick.

Jtrux · 02-21-2007, 07:32 PM

Yeah I was gonna take pics today while I had it fired up but my crappy flex fan took out my upper radiator hose right away so i'll fix that and then post some pics. I get my new march power steering brackets tomorrow so that'll look nice on there.

LUV2XCLR8 · 02-21-2007, 08:25 PM

Where are the pic's ? ? ?

02-18-2007, 07:28 PM	#1
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Finally got it started today I got my blazer started today fot the first time in two years with it's new engine. Critter and I worked on all day today until about twenty minutes ago and it all came together when she fired up. Here are the specs (pics soon): GM goodwrench 260 hp crate motor Edelbrock performer intake Carter 625 carb MSD Pro-billet distributor MSD Coil MSD 6AL Dynomax headers Accel wires I guess that's about it. Of course it was open headers so it was insanely loud but I loved it. We didn't do a full break in on it (because it was so loud and getting late) but ran it for ten minutes at increased RPM. It had great oil pressure and no miss or anything else bad, i'm pretty excited right now and can't wait to drive it. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

02-19-2007, 09:51 AM	#3
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Finally got it started today I'm happy we got it going. Glad I could help! __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

02-19-2007, 02:18 PM	#4
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: Finally got it started today You know this was coming Contratulations on the successful startup __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

02-19-2007, 02:38 PM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Finally got it started today Congrats - that is an awesome feeling when you finally get to fire up a project. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-19-2007, 05:03 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Finally got it started today AND __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-19-2007, 08:08 PM	#8
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Finally got it started today Point taken, I'll take some pics tomorrow and post them right away. It's not pretty yet cuz the pulleys and brackets still haven't been painted but it works so that's all that matters. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

02-20-2007, 08:58 PM	#9
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: Finally got it started today Man, its tomorrow now and still no pics! Seriously tho there just aint nuthin smells better than the first fire-up on an engine! Gaskets and fresh paint burnin in, maybe shes a little rich---WOOOHOO!! And ya did er with open headers-it just dont get no better than that. Later---DAC __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

02-20-2007, 10:55 PM	#10
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Finally got it started today I remember my first time, giggled like a little kid. Then I realized it was missing and running rough..... That part sucked but it was still cool that it started..... Congrats on yours... __________________ BAZINGA! My Build

02-21-2007, 07:32 PM	#12
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Finally got it started today Yeah I was gonna take pics today while I had it fired up but my crappy flex fan took out my upper radiator hose right away so i'll fix that and then post some pics. I get my new march power steering brackets tomorrow so that'll look nice on there. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

02-21-2007, 08:25 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Finally got it started today Where are the pic's ? ? ? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.