AZ 1972 C30 Longhorn for parts

[t korinek]

Parting out this long horn.
Already sold are: the fender emblems, bed,steering column.

This whole chassis will be for sale either whole or in pieces, 350 engine, good ac cab, auto, HO52 rear

This is also getting parted out locally.

Auxiliary factory fuel tank parts available

Bare AC Cab with out doors $700 with title SOLD

Rear slider $40 + shipping

Auxiliary battery tray, wiring & washer bottle bracket $130 shipped. SOLD

Front fenders in good shape $125 ea

350 Engine $200

Headers $90

Complete rolling Chassis $400

Anything else ask & I'll price

Thanks,
Tom

[t korinek]

Something I've never noticed before is the Carrier bearing is mounted to its own cross member, looks pretty heavy duty, maybe a 1 ton thing.

[TBONE1964]

Originally Posted by t korinek

Something I've never noticed before is the Carrier bearing is mounted to its own cross member, looks pretty heavy duty, maybe a 1 ton thing.

That is different Tom. I have never seen a carrier bearing mounted above the cross member either. Now I want to look at my 72 1/2 ton with factory leafs and see what the set up is.

Good luck with the sales,
Tom

[70shortfleet]

How much for the tilt?

[70shortfleet]

Originally Posted by 70shortfleet

How much for the tilt?

Sorry I see it is already sold

[JJorgensen52]

Pics of the aux battery tray and harness?? Interested, pending condition.

Originally Posted by TBONE1964

That is different Tom. I have never seen a carrier bearing mounted above the cross member either. Now I want to look at my 72 1/2 ton with factory leafs and see what the set up is.

Good luck with the sales,
Tom

That arrangement is correct for a 133" 1 ton, I had a 100% bone stock DRW truck that was the same way.

[DeadheadNM]

Is the lever for the floor mounted aux tank selector valve there and intact?

[t korinek]

Pete I'll check that, I did already pull the fill tube, cover, gas tank & sending unit & was able to save 2 of the long bolts with the special threaded nuts, all of which is for sale.

[DeadheadNM]

Originally Posted by t korinek

Pete I'll check that, I did already pull the fill tube, cover, gas tank & sending unit & was able to save 2 of the long bolts with the special threaded nuts, all of which is for sale.

I'd be interested in the aux tank send unit if you'd sell apart from the rest. If so, any idea if it works? Thanks Tom

[t korinek]

I'll test that sending unit, if I don't get a few bites on the complete set up after a few days I'll sell it separately.

[kaphillips]

Interested in the rear slider. Could I get some better pictures. How is the latch and felt. Was it on the option list as factory oem or it aftermarket?

[t korinek]

Hey tbone, I'll bet your 1/2 ton doesn't have this set up!

I'll have to get more pics, slider was on the spid
Thanks

Tilt was a good one, unfortunately gone already, I didn't get it either

[DeadheadNM]

Appreciate the help Tom thanks. LMK on the lever when poss. Pete

[Jake1971]

Interested in the bottom seat foam if it is driver quality, also wire harness from cab to rear crossmember. Ship to 78602. Thanks!

[w314speed]

Good Morning Tom! Interested in the front sway bar and brackets (SIZE?) if you part out the frame. LMK Thanks, Dan

[72MARIO]

If you part out the frame I need the rear shock mounts.

[mike1971c10]

Hey tom, do you still have the heater/ac control in the dash?
mike

[Critterman71]

I want the complete rolling chassis just need to find it a ride to Michigan how much for the chassis?

[DeadheadNM]

It's already got a Michigan sticker for you

[natec/10]

Shipping quote to 15024 on the cab please
Thanks

[Critterman71]

I am interested int he cab on the chassis as well. is there any one out there that can haul it to MI.

[t korinek]

pics of slider

Works ok, latch is good, says passport on it, there is scuffing on the lower outside bottom & the weatherstripping probably needs to be replaced in it because the sliders move around when you slide them side to side.

[t korinek]

Here's some pics of the cab

The cab has a little more rust than anticipated, so I have adjusted the price to $500 for the bare cab with title.

There is no rust in the roof or drip rail, cab corners look good, cab supports look good.

Some rust in the lower door pillars especially the passenger side, where the lower door hinge was welded on

There is also the normal lower kick panel rust about 1/4 to 1/2" up from floor.

There is rust in the outer rockers.

There is some bubbled rust under the floor mat, that will leave pits after blasting, but is not rusted through & there is also a rust spot on the engine side of the cowl on the driver side that is rusted through.

The radio hole has been cut to a square.

None of this rust is major or out of the ordinary, but want to disclose the shape of the cab so there are no surprises.

I can strap to a pallet & we have a tractor to load it or have room for an auto transport to pick up the rolling chassis, you will have to research & arrange your shipping on the cab or chassis, (you ship) is a good place to start.

Critterman Price of rolling Chassis is $425 with bare cab $800

67-72 trucks has passed on the cab

natec/10 you are up on the cab.

w314speed, sway bar is the normal 3/4 ton size 1 1/8"

mike 1971 the ac control is gone , but I have another $60 shipped without mount bracket.

72 mario I should have a set of the rear shock mounts already off another truck $40 for the pair shipped.

jake, I'll check the cab to rear harness, foam is not good enough to ship.

[t korinek]

Rust in floor looks worse in pics, sorry, I didnt get too many good shots, I just focused on the areas I thought that needed work.

[Jake1971]

Originally Posted by t korinek

jake, I'll check the cab to rear harness, foam is not good enough to ship.

Sounds good. LMK total to 78602.