Transmission mount won't fit! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

silvereagle07 · 07-09-2010, 08:43 AM

I am replacing the transmission mount that I found collapsed and the new mount won't fit. It's a 1984 GMC 2wd sb with 700r4. The part number I have it a 2392 from local parts store. It looks the same as the old mount and bolts to trans but the lower stud will not align with crossmember. Does anyone have a pic of the crossember and mount on there truck?

benoit454 · 07-09-2010, 10:51 AM

you try rotating the thing 180 to make it work? Some of them are straight inline with the 2 bolt holes others are offset. I had a hard time finding one for our 84 at Autozone but it has a th350 in it. I ended up getting another style, one from an 85 monte carlo.

check this out...

http://www.autozone.com/autozone/par.../N-ik2xeZ6o23q

the one with the a in front is offset looking and the one ends in v is not. At least that's how they look may be the difference. You may have one and need the other.

silvereagle07 · 07-09-2010, 11:26 AM

Thanks, I was thinking of going and grabbing one to see if it will work. Now after that I just need to get a driveshaft cut. The one I got is about 3" too long. This truck is being a pain in my side.

benoit454 · 07-09-2010, 11:40 PM

what driveshaft did you get a long bed one?

benoit454 · 07-09-2010, 11:41 PM

the one I got is 3 inches too short, came out of the 84 which had a th350 c long tail or same length as a 700r4 trans would use and we need a 3 inch longer one, can't hardly find one or find a local shop to do them.

kelsfine69 · 07-10-2010, 08:24 PM

Sometimes to have to push the stud forward. I lifted my trans to do the filter and when I dropped it back down it did not line up. The stud is in rubber so it will flex.

benoit454 · 07-10-2010, 09:39 PM

sent you a pm jeramy about the driveshaft.

4x4toy · 07-11-2010, 10:18 AM

Front mounts may be worn out also.

Slonaker · 07-12-2010, 05:36 PM

The mount listed in the book did not match my old one. I had to match it up visually with one in the book. I got lucky that visit, and got a counter guy who knew what a book was...

Slonaker

07-09-2010, 08:43 AM	#1
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Transmission mount won't fit! I am replacing the transmission mount that I found collapsed and the new mount won't fit. It's a 1984 GMC 2wd sb with 700r4. The part number I have it a 2392 from local parts store. It looks the same as the old mount and bolts to trans but the lower stud will not align with crossmember. Does anyone have a pic of the crossember and mount on there truck? __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

07-09-2010, 10:51 AM	#2
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Transmission mount won't fit! you try rotating the thing 180 to make it work? Some of them are straight inline with the 2 bolt holes others are offset. I had a hard time finding one for our 84 at Autozone but it has a th350 in it. I ended up getting another style, one from an 85 monte carlo. check this out... http://www.autozone.com/autozone/par.../N-ik2xeZ6o23q the one with the a in front is offset looking and the one ends in v is not. At least that's how they look may be the difference. You may have one and need the other. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 Last edited by benoit454; 07-09-2010 at 10:54 AM.

07-09-2010, 11:26 AM	#3
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Transmission mount won't fit! Thanks, I was thinking of going and grabbing one to see if it will work. Now after that I just need to get a driveshaft cut. The one I got is about 3" too long. This truck is being a pain in my side. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

07-09-2010, 11:40 PM	#4
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Transmission mount won't fit! what driveshaft did you get a long bed one? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-09-2010, 11:41 PM	#5
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Transmission mount won't fit! the one I got is 3 inches too short, came out of the 84 which had a th350 c long tail or same length as a 700r4 trans would use and we need a 3 inch longer one, can't hardly find one or find a local shop to do them. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-10-2010, 08:24 PM	#6
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Transmission mount won't fit! Sometimes to have to push the stud forward. I lifted my trans to do the filter and when I dropped it back down it did not line up. The stud is in rubber so it will flex. __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

07-10-2010, 09:39 PM	#7
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Transmission mount won't fit! sent you a pm jeramy about the driveshaft. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-11-2010, 10:18 AM	#8
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: Transmission mount won't fit! Front mounts may be worn out also. __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

07-12-2010, 05:36 PM	#9
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: Transmission mount won't fit! The mount listed in the book did not match my old one. I had to match it up visually with one in the book. I got lucky that visit, and got a counter guy who knew what a book was... Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.