66 blazer build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kdrodworks316 · 04-07-2008, 06:46 AM

I sold the $25 burban today for $500. The plan is for a 66 blazer with a removable top. as soon as the 62 is roadworthy, we will get the body of the beast of burdin and start shortening it and figuring out the top. here a couple of pics of how it sits now and the last 2 pics are of the new project 65 hearse because it has barn doors, the blue one has clam shell doors.

kdrodworks316 · 04-07-2008, 06:48 AM

hearse burb

kdrodworks316 · 04-07-2008, 07:13 AM

here a rough photo shop of what we are thinking

joe231 · 04-07-2008, 07:18 AM

I give it

can't wait for progress

jonzcustomshop · 04-09-2008, 02:34 PM

here issome stuff that I was playing around with on another thread....

jonzcustomshop · 04-09-2008, 03:00 PM

here are some rudimentery photo chops.
I would figure a way to take the front visor/overhang off with the roof, I tried leaving it ,and it did not look good.

72BlckButy · 04-09-2008, 03:10 PM

That is going to be sweet!

likaroc13 · 04-10-2008, 08:04 AM

that'll look awesome if you can pull it off...good luck, & i'll keep an eye out for progress

*1974k5blazer* · 04-10-2008, 08:40 AM

its gonna be sick pleeeeaaaassssseeee take alot of good pics!, i plan on doing this down the road also!

283 Man · 04-10-2008, 03:07 PM

like this one

Its real not photo shoped!!

GRIMSS · 04-10-2008, 03:31 PM

That's going to be a cool ride.

kdrodworks316 · 05-04-2008, 06:10 PM

Well, no progress on the blazer project. But the hearse project is about to get started. Jon and I moved it over to his place a couple weeks ago and thursday afternoon we were able to get it to run and move under its own power. And the lil 6 banger runs pretty good. Its going to need a fuel pump and a carb kit, maybe a few gaskets, but seems to be fairly road worthy. Now all I need to do is get it home to rexburg ID from missoula MT.

kdrodworks316 · 05-10-2008, 03:40 AM

No pics yet, but some updates on progress on the hearse burb. ordered all the patches for the floor and rockers, also lined up a new fuel pump and carb kit. should be able to drag it home at the end of next week. I will get some pics up as soon as I get it loaded.

kdrodworks316 · 05-19-2008, 07:45 AM

I got the burb home with the help from Jon from jonzcustomshop, We got it running pretty good and it loaded under its own power. Got it home with no problems and started the rust repair, which ended up being more severe than I thought. Plans where full floor pans, outer floor, inner and outer rockers and cab supports. But now I am looking at lower door posts and toe boards.ugh! And boy did I forget how much fun rust repair is. At any rate, the wife allowed me to buy some fancy tools to make the job easier. So $380 later I am covered in 40 year old chevy grunge and playing we my new toys. it was a good day and tomarrow should be even more fun as I contiue the fun on the passenger side. I cant wait to see what surprizes it has in store for me. I would also like to Thank Jon for all his help and work on my junk. I know you are reading this, Thanks again man!

joe231 · 05-19-2008, 08:08 AM

dude...... i need to see pics of the new toys!!!

originalJD · 05-19-2008, 08:16 AM

Sweet! Can't wait to see some progress on it.

jonzcustomshop · 05-19-2008, 11:59 AM

You're welcome!
Once you get the rust under control that will be a nice ride!

kdrodworks316 · 06-07-2008, 07:43 PM

Not much progress yet, between the weather and being sick as hell, I havent done much. I did rebuild the carb for the second time since the kit I got the first time was junk and didnt come with a new pump or float specs. now she really runs like a top. hung the clean drivers door and got the new door post and rocker in. Finally got all of my new parts from classic parts and should gain some ground this weekend. Seats are out for new custom skins and the burban will get the same treatment as soon as the rust is gone. got the floor shifter in and cut off my wifes right arm at the elbow for a shifter handle. She's not impressed but I like it. Also finally got my glass front fenders today, so I also got to change the front clip out this weekend as well. Pics go up sunday night if I get anything done. Keep in touch Jon! I am going to stop by next time I am in town.

**Captainfab** · 06-08-2008, 12:13 AM

Derric...where did you get your glass front fenders from. I'm curious what the quality is like. I've heard some of the glass parts are crap....

kdrodworks316 · 06-08-2008, 01:38 AM

I got them from a buddy of mine, traded them for the $25 burban. He got them from US BODY SOURCE and they proudly made in the USA. www.usbodysource.com I dont know how they fit yet, but I will give a full report after I install them. they seem very well made, but the finish leaves alot to be desired, they are very rough around the seams. The resined on tag gives finishing instructions and suggestions. They are just shy of $800 for the heavy duty on their site plus shipping. I'll get some pics up tomarrow and let everyone know how I feel about them.

jonzcustomshop · 06-08-2008, 08:51 AM

holy cr#p thats alot of money for fenders!
Bet they won't rust!

At one time ( I still want to, but I don't have that kind of money) I wanted to put together an entire glass truck using the US body source parts.
I thought a glass truck with a twin turbo smallblock, and "vet etr" on the plates, would be the ultimate sleeper.
this was about the time that the gmc cyclones were coming out, so along time ago.....

**Captainfab** · 06-08-2008, 04:00 PM

[QUOTE=jonzcustomshop;2756295]holy cr#p thats alot of money for fenders!
Bet they won't rust!QUOTE]

Yeah that does seem like a lot for a pait of fenders. You would think for that price they would be nicer than the ones kd has. But like you said Jon they won't rust!

For the longest time I've been wanting to get the one piece front end with a 4" cowl hood. Those still aren't a bad deal @$1500.00.....25+ years ago they were ~$1100.00

kdrodworks316 · 06-09-2008, 12:20 AM

well I got a bit done on the hearse today, replaced the drivers inner fender and put on the glass fender. The fit looks ok in the fading daylight, but havent totally finished bolting it all on. Look at what I got to play with today.....it is a 1962 Stageway that a buddy and me built for a lodge in jackson hole, Wyoming.....and I have located a longer 6 door. Dont even ask where because I'm not telling.

scotts62 · 06-09-2008, 07:21 AM

Wow thats awsome! Iv never seen that before

murdoc · 06-09-2008, 04:04 PM

hey kdrod, im from idaho too, i think ive seen the six door your talking about, i saw it for sale a while ago, its gone now. where you the one who picked it up?

04-07-2008, 06:46 AM	#1
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	66 blazer build I sold the $25 burban today for $500. The plan is for a 66 blazer with a removable top. as soon as the 62 is roadworthy, we will get the body of the beast of burdin and start shortening it and figuring out the top. here a couple of pics of how it sits now and the last 2 pics are of the new project 65 hearse because it has barn doors, the blue one has clam shell doors. Attached Images

04-07-2008, 06:48 AM	#2
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build hearse burb Attached Images

04-07-2008, 07:13 AM	#3
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build here a rough photo shop of what we are thinking Attached Images

04-07-2008, 07:18 AM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 blazer build I give it can't wait for progress __________________ *CHEVY ONLY*

04-09-2008, 02:34 PM	#5
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 66 blazer build here issome stuff that I was playing around with on another thread.... Attached Images

04-09-2008, 03:00 PM	#6
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 66 blazer build here are some rudimentery photo chops. I would figure a way to take the front visor/overhang off with the roof, I tried leaving it ,and it did not look good. Attached Images

04-09-2008, 03:10 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 66 blazer build That is going to be sweet! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-10-2008, 08:04 AM	#8
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 66 blazer build that'll look awesome if you can pull it off...good luck, & i'll keep an eye out for progress

04-10-2008, 08:40 AM	#9
1974k5blazer Account Suspended Join Date: Dec 2007 Location: Queen Creek AZ Posts: 243	Re: 66 blazer build its gonna be sick pleeeeaaaassssseeee take alot of good pics!, i plan on doing this down the road also!

04-10-2008, 03:07 PM	#10
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: 66 blazer build like this oneIts real not photo shoped!! Last edited by 283 Man; 09-21-2008 at 08:47 PM.

04-10-2008, 03:31 PM	#11
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: 66 blazer build That's going to be a cool ride. __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

05-04-2008, 06:10 PM	#12
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build Well, no progress on the blazer project. But the hearse project is about to get started. Jon and I moved it over to his place a couple weeks ago and thursday afternoon we were able to get it to run and move under its own power. And the lil 6 banger runs pretty good. Its going to need a fuel pump and a carb kit, maybe a few gaskets, but seems to be fairly road worthy. Now all I need to do is get it home to rexburg ID from missoula MT.

05-10-2008, 03:40 AM	#13
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build No pics yet, but some updates on progress on the hearse burb. ordered all the patches for the floor and rockers, also lined up a new fuel pump and carb kit. should be able to drag it home at the end of next week. I will get some pics up as soon as I get it loaded.

05-19-2008, 07:45 AM	#14
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build I got the burb home with the help from Jon from jonzcustomshop, We got it running pretty good and it loaded under its own power. Got it home with no problems and started the rust repair, which ended up being more severe than I thought. Plans where full floor pans, outer floor, inner and outer rockers and cab supports. But now I am looking at lower door posts and toe boards.ugh! And boy did I forget how much fun rust repair is. At any rate, the wife allowed me to buy some fancy tools to make the job easier. So $380 later I am covered in 40 year old chevy grunge and playing we my new toys. it was a good day and tomarrow should be even more fun as I contiue the fun on the passenger side. I cant wait to see what surprizes it has in store for me. I would also like to Thank Jon for all his help and work on my junk. I know you are reading this, Thanks again man!

05-19-2008, 08:08 AM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 66 blazer build dude...... i need to see pics of the new toys!!! __________________ *CHEVY ONLY* Last edited by joe231; 05-19-2008 at 08:08 AM.



Register or Log In To remove these advertisements.

05-19-2008, 08:16 AM	#16
originalJD James Join Date: May 2008 Location: Dayton, WA Posts: 455	Re: 66 blazer build Sweet! Can't wait to see some progress on it. __________________ Never crush'em. Restor'em or recycle'em. The payoff is always worth it in the end. http://viewmorepics.myspace.com/inde...lbumId=1709080 http://s258.photobucket.com/albums/h...e_top_view_all

05-19-2008, 11:59 AM	#17
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 66 blazer build You're welcome! Once you get the rust under control that will be a nice ride!

06-07-2008, 07:43 PM	#18
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build Not much progress yet, between the weather and being sick as hell, I havent done much. I did rebuild the carb for the second time since the kit I got the first time was junk and didnt come with a new pump or float specs. now she really runs like a top. hung the clean drivers door and got the new door post and rocker in. Finally got all of my new parts from classic parts and should gain some ground this weekend. Seats are out for new custom skins and the burban will get the same treatment as soon as the rust is gone. got the floor shifter in and cut off my wifes right arm at the elbow for a shifter handle. She's not impressed but I like it. Also finally got my glass front fenders today, so I also got to change the front clip out this weekend as well. Pics go up sunday night if I get anything done. Keep in touch Jon! I am going to stop by next time I am in town.

06-08-2008, 12:13 AM	#19
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 66 blazer build Derric...where did you get your glass front fenders from. I'm curious what the quality is like. I've heard some of the glass parts are crap.... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-08-2008, 01:38 AM	#20
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build I got them from a buddy of mine, traded them for the $25 burban. He got them from US BODY SOURCE and they proudly made in the USA. www.usbodysource.com I dont know how they fit yet, but I will give a full report after I install them. they seem very well made, but the finish leaves alot to be desired, they are very rough around the seams. The resined on tag gives finishing instructions and suggestions. They are just shy of $800 for the heavy duty on their site plus shipping. I'll get some pics up tomarrow and let everyone know how I feel about them.

06-08-2008, 08:51 AM	#21
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 66 blazer build holy cr#p thats alot of money for fenders! Bet they won't rust! At one time ( I still want to, but I don't have that kind of money) I wanted to put together an entire glass truck using the US body source parts. I thought a glass truck with a twin turbo smallblock, and "vet etr" on the plates, would be the ultimate sleeper. this was about the time that the gmc cyclones were coming out, so along time ago.....

06-08-2008, 04:00 PM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 66 blazer build [QUOTE=jonzcustomshop;2756295]holy cr#p thats alot of money for fenders! Bet they won't rust!QUOTE] Yeah that does seem like a lot for a pait of fenders. You would think for that price they would be nicer than the ones kd has. But like you said Jon they won't rust! For the longest time I've been wanting to get the one piece front end with a 4" cowl hood. Those still aren't a bad deal @$1500.00.....25+ years ago they were ~$1100.00 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-09-2008, 12:20 AM	#23
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 66 blazer build well I got a bit done on the hearse today, replaced the drivers inner fender and put on the glass fender. The fit looks ok in the fading daylight, but havent totally finished bolting it all on. Look at what I got to play with today.....it is a 1962 Stageway that a buddy and me built for a lodge in jackson hole, Wyoming.....and I have located a longer 6 door. Dont even ask where because I'm not telling. Attached Images

06-09-2008, 07:21 AM	#24
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 66 blazer build Wow thats awsome! Iv never seen that before __________________ Scott 93 crew cab build Project 62

06-09-2008, 04:04 PM	#25
murdoc Registered User Join Date: Mar 2008 Location: nampa, idaho Posts: 332	Re: 66 blazer build hey kdrod, im from idaho too, i think ive seen the six door your talking about, i saw it for sale a while ago, its gone now. where you the one who picked it up?

Register or Log In To remove these advertisements.