The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-20-2010, 03:43 PM   #1
c10chevy69
Registered User
 
c10chevy69's Avatar
 
Join Date: May 2004
Location: Oklahoma City
Posts: 205
Ground strap locations

I crawled around under the truck on Sat for a while looking for the ground straps. I also went through the assembly manual several times and only came up with the engine to firewall locations. I found 4 of them but could not find the last one ( if you buy any of the kits you get 5). With help from some folks on here and an email to GMCPaul, I am hoping this last one will do the trick. I used the book for the engine locations, sorry I am still working under the truck. Pics 1 and 2 are the V8 and I6 locations. Pic 3 is in front on the pass. side inner fender. Pic 4 is under the pass. door about halfway. Last one is from GMCPaul and Shyguy, pass. side behind the tire. I hope this will help those that need it. I searched on here and the web and did not find much info other than the firewall locations. A thank you goes out to those who helped with my other thread.
Attached Images
     
__________________
1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

Last edited by c10chevy69; 09-21-2010 at 05:18 AM. Reason: Adding text to help with search
c10chevy69 is offline   Reply With Quote
Old 09-20-2010, 06:16 PM   #2
Rollie396
someday it will be done!
 
Rollie396's Avatar
 
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
Re: Ground strap locations

I remember when I took my truck apart there was a ground wire bolted to the rad support between the battery box and the radiator.I just don't recall where it went to.
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore.
'80 LWB 2wd beater
'67 GMC long fleet (cab donor)
'66 long step (parked till it's turn comes around)
'65 short step (parts truck that will donate it's bed and possibly frame to the '66)
'06 Grand Prix wife's car (she hardly lets me touch it)
my pics
Rollie396 is offline   Reply With Quote
Old 09-20-2010, 08:15 PM   #3
JimKshortstep4x4
Senior Member
 
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
Re: Ground strap locations

Nice pictures of the groundstrap locations.

Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end
1965 Impala SS 400 sbc, Muncie rock crusher
1966 Impala SS 396 bbc, TH 400
1969 El Camino, 350 sbc, TH 350
1971 Snowplow built on a Blazer frame
1972 GMC Short bed, stepside, TH 400, 427 BBC
JimKshortstep4x4 is offline   Reply With Quote
Old 09-20-2010, 08:31 PM   #4
100%Chevy
Registered User
 
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
Re: Ground strap locations

Quote:
Originally Posted by Rollie396 View Post
I remember when I took my truck apart there was a ground wire bolted to the rad support between the battery box and the radiator.I just don't recall where it went to.
On mine,it goes to the negative cable.
Mike.
100%Chevy is offline   Reply With Quote
Old 09-21-2010, 08:25 AM   #5
eightbanger
454 MAKES IT ROAR
 
eightbanger's Avatar
 
Join Date: Jan 2008
Location: Essex, U.K
Posts: 2,701
Re: Ground strap locations

Sorry to hijack...but who sells the ground strap kits?
__________________
Nigel.

An American living in a British body.

1971 Chevy Cheyenne 10 454

"In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell


"When injustice becomes law, resistance becomes duty" - Thomas Jefferson

No more pain.
03.12.60 -- 12.28.10

http://www.youtube.com/Eightbanger
eightbanger is offline   Reply With Quote
Old 09-21-2010, 09:32 AM   #6
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: Ground strap locations

Quote:
Originally Posted by eightbanger View Post
Sorry to hijack...but who sells the ground strap kits?
Most parts stores sell these such as advanced.
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 09-21-2010, 09:45 AM   #7
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: Ground strap locations

subscribed...
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 09-21-2010, 09:46 AM   #8
Lee H
Registered User
 
Lee H's Avatar
 
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,147
Re: Ground strap locations

Ground strap kits are a good way to go for restoration purposes. If you just need to make sure you are well grounded use any battery (I perfer black) cable about 12 inches long and run from head or motor mount to the frame, clean contacts of course.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner.

1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components.

My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703
Lee H is offline   Reply With Quote
Old 09-21-2010, 11:06 AM   #9
eightbanger
454 MAKES IT ROAR
 
eightbanger's Avatar
 
Join Date: Jan 2008
Location: Essex, U.K
Posts: 2,701
Re: Ground strap locations

Quote:
Originally Posted by 70cst View Post
Most parts stores sell these such as advanced.
Cheers 70.
__________________
Nigel.

An American living in a British body.

1971 Chevy Cheyenne 10 454

"In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell


"When injustice becomes law, resistance becomes duty" - Thomas Jefferson

No more pain.
03.12.60 -- 12.28.10

http://www.youtube.com/Eightbanger
eightbanger is offline   Reply With Quote
Old 09-21-2010, 03:19 PM   #10
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,139
Re: Ground strap locations

Good info to keep
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" Circumsatances Do Not Change Responsibility "

" The Sky is not the Limit, Your Mind is." Marilyn Monroe ..


RIP Charlie Watts 1941 - 2021
Already Gone is offline   Reply With Quote
Old 09-21-2010, 05:11 PM   #11
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Ground strap locations

a pirce of wire with an eyelet on each end?? is it really that difficult to make yourself that anybody cant figure out how to make one???
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 09-21-2010, 09:41 PM   #12
Shyguy
Junior Member
 
Shyguy's Avatar
 
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
Re: Ground strap locations

Quote:
Originally Posted by cdowns View Post
a pirce of wire with an eyelet on each end?? is it really that difficult to make yourself that anybody cant figure out how to make one???
My thoughts exactly. Since I am not for a pure restoration I am going to make up my own ground straps on both of my trucks.
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465.
'75 C-30 Single Cab DRW-350 small block/NP-435.
'77 GMC-6500 Dump Truck, 427 Tall Deck.
'92 GMC K-3500 Duallie, 454/4L80E.
Shyguy is offline   Reply With Quote
Old 09-22-2010, 08:55 PM   #13
petey-pablo
"THE GREEN GOBLIN"
 
petey-pablo's Avatar
 
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
Re: Ground strap locations

I made my own and for the back of the motor I used some ground straps I had lying around from the heads to the frame and I think they look pretty darn good if you ask me.. I also put some where the original ones were under the Cab to the frame.
Attached Images
     
__________________
Petey-pablo
"THE GREEN GOBLIN"
1972 Cheyenne 10 Short Fleet Side
Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs.
454BBC TH400,Posi

1971 Cheyenne 10 Long Fleet Side
454BBC TH350,Posi Sold

Drive it like you stole it!
Petey-pablo@sbcglobal.net

Last edited by petey-pablo; 09-22-2010 at 09:07 PM.
petey-pablo is offline   Reply With Quote
Old 09-22-2010, 09:03 PM   #14
Shyguy
Junior Member
 
Shyguy's Avatar
 
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
Re: Ground strap locations

Quote:
Originally Posted by petey-pablo View Post
I made my own and for the back of the motor I used some ground straps I had lying around from the heads to the frame and I think they look pretty darn good if you ask me..
Those ground straps sure look good, gives me some inspiration.

Thank you.
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465.
'75 C-30 Single Cab DRW-350 small block/NP-435.
'77 GMC-6500 Dump Truck, 427 Tall Deck.
'92 GMC K-3500 Duallie, 454/4L80E.
Shyguy is offline   Reply With Quote
Old 09-22-2010, 09:05 PM   #15
petey-pablo
"THE GREEN GOBLIN"
 
petey-pablo's Avatar
 
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
Re: Ground strap locations

In these pics you can se the bigger ground straps I used in back of the motor. NO ONE EVER SAID TOO MUCH GROUND WAS A BAD IDEA..
Attached Images
    
__________________
Petey-pablo
"THE GREEN GOBLIN"
1972 Cheyenne 10 Short Fleet Side
Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs.
454BBC TH400,Posi

1971 Cheyenne 10 Long Fleet Side
454BBC TH350,Posi Sold

Drive it like you stole it!
Petey-pablo@sbcglobal.net
petey-pablo is offline   Reply With Quote
Old 11-29-2010, 08:33 PM   #16
gkesseru
Registered User
 
gkesseru's Avatar
 
Join Date: Dec 2009
Location: California, Maryland
Posts: 544
Re: Ground strap locations

Bigger on grounds is always better. Also, ground strap flat wire uses very small strands. This is good for two reasons:
1. Electricity mainly flows on the surface of the conductor, so more strands means more surface area and less resistance.
2. Thinner strands are less likely to harden and break from movement between the frame and engine.
__________________
72 Fleet (died)
78 Step (sold)
55 Step named Fred (sold)
00 F150
68 Step (named El Scorcho by PO)
Build thread for the new El Scorcho http://67-72chevytrucks.com/vboard/s...d.php?t=392932
gkesseru is offline   Reply With Quote
Old 10-02-2013, 03:07 PM   #17
Cavscout
Registered User
 
Join Date: Aug 2013
Location: Murfreesboro, TN
Posts: 13
Re: Ground strap locations

What is the biggest reason for having so many grounding straps? My 70 C10 has only 2 that I have seen, one strap from the firewall to a valave cover bolt and the negative battery terminal to the engine block. Do I need to run the body/bed straps to the frame?
Cavscout is offline   Reply With Quote
Old 10-02-2013, 03:27 PM   #18
vidman
Registered User
 
vidman's Avatar
 
Join Date: Jun 2012
Location: Fitchburg,Mass
Posts: 737
Re: Ground strap locations

The more clean ground straps you have the less electrical problems you will have down the road.
__________________
62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother
vidman is offline   Reply With Quote
Old 10-02-2013, 06:12 PM   #19
Cavscout
Registered User
 
Join Date: Aug 2013
Location: Murfreesboro, TN
Posts: 13
Re: Ground strap locations

Thanks for the quick reply Vidman, I'll go ahead and ground the bed and cab to the frame and see how that works.
Cavscout is offline   Reply With Quote
Old 10-02-2013, 07:09 PM   #20
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Ground strap locations

a light bulb needs a wire (+) takin the voltage to the filament// after the voltage gets to the filament it needs a path(-) to ground in order for the filament in the bulb to glow and light up
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 10-02-2013, 10:26 PM   #21
heyjoe
Registered User
 
Join Date: Apr 2003
Location: New Orleans area
Posts: 198
Re: Ground strap locations

Quote:
Originally Posted by cdowns View Post
a light bulb needs a wire (+) takin the voltage to the filament// after the voltage gets to the filament it needs a path(-) to ground in order for the filament in the bulb to glow and light up
Gee, you make it sound so simple! 'Cause it is!
__________________
'67 C20 small window Fleetside - 250 inline 6 - 3 on the tree - heavy duty clutch, brakes, rear springs - 17.5 wheels w/bias ply tires - AM radio - heater.
heyjoe is offline   Reply With Quote
Old 10-16-2013, 03:09 PM   #22
67chevemall
Registered User
 
67chevemall's Avatar
 
Join Date: Apr 2003
Location: NB
Posts: 3,367
Re: Ground strap locations

Strap @ Motor to frame, frame to cab, and 3 by battery, frame, body, motor to Battery (-).
__________________
1968 Chevy C10 307 3ott fleetside
1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold
1967 Chev C/10 step, 383, M21. SOLD
67chevemall is offline   Reply With Quote
Old 10-16-2013, 04:00 PM   #23
Rich916
Registered User
 
Rich916's Avatar
 
Join Date: Dec 2009
Location: Rancho Cordova, CA
Posts: 274
Re: Ground strap locations

With fresh paint and powdercoat i was having problems getting anything grounded.
I used a "grounding" washer, this way you get down to bare metal without having to grind away paint etc...
Attached Images
  
__________________
71 Short Step Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=429946
Rich916 is offline   Reply With Quote
Old 10-16-2013, 04:41 PM   #24
SCHRUMGMC
Registered User
 
SCHRUMGMC's Avatar
 
Join Date: Dec 2012
Location: North Carolina
Posts: 4,989
Re: Ground strap locations

How much is a kit normally running? and so the electrical runs through these Straps?
__________________
1971 GMC Sierra
1959 GMC 100
SCHRUMGMC is offline   Reply With Quote
Old 10-16-2013, 04:50 PM   #25
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,947
Re: Ground strap locations

No they ground the vehicle to make all your elecrtical work properly. No current runs through them. A stated earlier... local parts stores should have grounding straps.

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com