Clutch Fan Install getting mucho frustrated - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Oregon 1967 GMC** · 11-09-2024, 10:18 AM

Could someone break it down the assembly order for this? I'm thinking I need studs because I cannot get the bolts in from the fan side o from the water pump.

**Steeveedee** · 11-09-2024, 10:27 AM

Save yourself mucho frustration and get the studs. It's 10 times easier.

**Stocker** · 11-09-2024, 01:23 PM

Quote:

Originally Posted by Steeveedee

Save yourself mucho frustration and get the studs. It's 10 times easier.

This. The last time I changed my fan clutch, I didn't know about the studs. Fiddly but I eventually got it. Told myself if I ever do it again, I'll get the studs.

**leddzepp** · 11-09-2024, 01:49 PM

I use studs on every vehicle I own, makes life way easier.

**Oregon 1967 GMC** · 11-09-2024, 02:37 PM

Copy that. Thank you I'm getting studs.

chewychevy67 · 11-09-2024, 03:01 PM

I used studs on my 67 327 as well. Much easier to line up the clutch under the shroud

54blackhornet · 11-09-2024, 03:17 PM

Napa has a kit with everything you need.

**Dashman** · 11-09-2024, 07:01 PM

You're not putting that spacer back, right? I believe those are only for flex fans replacing thermo clutch fans.

**Stocker** · 11-09-2024, 08:44 PM

Quote:

Originally Posted by Dashman

You're not putting that spacer back, right? I believe those are only for flex fans replacing thermo clutch fans.

Good point, that spacer should not be needed. The real test is whether the fan blades are roughly half-in, half-out of the shroud opening.

**Oregon 1967 GMC** · 11-10-2024, 03:12 AM

Quote:

Originally Posted by Dashman

You're not putting that spacer back, right? I believe those are only for flex fans replacing thermo clutch fans.

I do need that spacer to reach half in half out position in shroud. Hope i can find studs that long. I'll look at NAPa because O O'Reilly only had two inches

**Oregon 1967 GMC** · 11-10-2024, 08:51 AM

I ordered this from Summit. Hope it works

11-09-2024, 10:18 AM	#1
Oregon 1967 GMC Senior Member Join Date: Jan 2014 Location: Portland, Oregon Posts: 440	Clutch Fan Install getting mucho frustrated Could someone break it down the assembly order for this? I'm thinking I need studs because I cannot get the bolts in from the fan side o from the water pump. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

11-09-2024, 10:27 AM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,609	Re: Clutch Fan Install getting mucho frustrated Save yourself mucho frustration and get the studs. It's 10 times easier. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-09-2024, 01:49 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: Clutch Fan Install getting mucho frustrated I use studs on every vehicle I own, makes life way easier. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-09-2024, 02:37 PM	#5
Oregon 1967 GMC Senior Member Join Date: Jan 2014 Location: Portland, Oregon Posts: 440	Re: Clutch Fan Install getting mucho frustrated Copy that. Thank you I'm getting studs. __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

11-09-2024, 03:01 PM	#6
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: Clutch Fan Install getting mucho frustrated I used studs on my 67 327 as well. Much easier to line up the clutch under the shroud

11-09-2024, 03:17 PM	#7
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,386	Re: Clutch Fan Install getting mucho frustrated Napa has a kit with everything you need. __________________ 71 C-20 07 Magnum RT AWD

11-09-2024, 07:01 PM	#8
Dashman Active Member Join Date: Apr 2021 Location: Santa Cruz, NM Posts: 111	Re: Clutch Fan Install getting mucho frustrated You're not putting that spacer back, right? I believe those are only for flex fans replacing thermo clutch fans.

11-10-2024, 08:51 AM	#11
Oregon 1967 GMC Senior Member Join Date: Jan 2014 Location: Portland, Oregon Posts: 440	Re: Clutch Fan Install getting mucho frustrated I ordered this from Summit. Hope it works Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.