remove shift nob - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70chevykidd · 04-08-2011, 01:07 PM

can anyone tell me the best way to remove an auto shift nob in my 70 cst

**leddzepp** · 04-08-2011, 05:11 PM

i have never had any success removing one without destroying it in the process
Posted via Mobile Device

68gmsee · 04-08-2011, 06:28 PM

I tried to remove one long time ago and ruined it. Those suckers must be pressed into place while they're still warm from the mold. Either that or they glue them in place so they won't come off.

dwcsr · 04-08-2011, 07:21 PM

Take the handle off and put in boiling water for about 10 minutes then clamp the handle in a vise and quickly wrap a rag around the knob and pull it off.

Beefy Norm · 04-09-2014, 04:25 PM

Quote:

Originally Posted by 70chevykidd

can anyone tell me the best way to remove an auto shift nob in my 70 cst

The knob itself isn't meant to come off. If you look down the shaft to where it mount to the column you will see a pin that needs to be punched out and that will allow you to replace the entire arm. Check LMC truck.com for a replacement part. I've had a lot of luck finding parts with them.

04-08-2011, 01:07 PM	#1
70chevykidd Registered User Join Date: Jan 2011 Location: Pueblo, Colorado Posts: 49	remove shift nob can anyone tell me the best way to remove an auto shift nob in my 70 cst __________________ 70 c10 350 with headers, noisy gear drive, .450 lift cam and 4bbl carb w/TH400 hope to get a another Big Block in its lifetime Last edited by 70chevykidd; 04-08-2011 at 01:17 PM.

04-08-2011, 05:11 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: remove shift nob i have never had any success removing one without destroying it in the process Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

04-08-2011, 06:28 PM	#3
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: remove shift nob I tried to remove one long time ago and ruined it. Those suckers must be pressed into place while they're still warm from the mold. Either that or they glue them in place so they won't come off.

04-08-2011, 07:21 PM	#4
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: remove shift nob Take the handle off and put in boiling water for about 10 minutes then clamp the handle in a vise and quickly wrap a rag around the knob and pull it off.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.