New fuel tanks

[robnolimit]

After working on the Streettrucks C-10, it was clear to us that standard C-10 tanks are not the hot ticket for Step-notched trucks. So, after some measurements and a few calls to Porterbuilt, we set out to build a custom tank that fits this type of build.
These tanks are 18 gallons, baffled and sectioned, and include new custom formed rear crossmembers. The new crossmembers are a direct bolt in for '67 to '87 stock rear rails, and will replace the stock rear crossmember. A new front mount square tube crossmember is also included. These tanks are "tucked-up" so that they don't hang down below the body, and include the filler cap.

Check out our website for more info

http://www.nolimit.net/prodinfo.asp?number=B5%2DTNK

[Malo83]

Any pics bolted in ?

[PRattenbury]

How much? Can you get one with a sump, set up for in tank electric pump?

[Michael Hill]

Rob, Im using the KP watts link on my rear end and was wondering if you know if there will be enough room between the watts set-up and the tank? Any help would be greatly appreciated. Nice tank hope we can get it for in-tank electric fuel pump?

[m6z]

I would also like to see some installed picts.