Found a Parts Manufacturer in Dallas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

repeeler · 09-29-2010, 02:07 PM

I bought some parts today from a place in Dallas called Adept industries. I bought a radiator support for $165 and inner fender for $69 and a window regulator for $32. I thought the prices were reasonable and the quality seems good. They said they supply LMC, Goodmark and others. Just thought I would pass this on. By having them local I saved a ton on shipping these large parts, plus they were a few bucks cheaper than the online retailers.
BTW, they gave me 2 extra Parts catalog CD's if any of you DFW guys want one.

dag19 · 09-29-2010, 02:16 PM

Oh nice!! That is a good bit of info to know. I am new to the area here and have been looking for a store like that. Those do seem like good prices and if they supply those places it should be "as good as factory". That is cool! I'd be interested in a CD

barry h. · 09-29-2010, 02:27 PM

how and did you find them,where in dallas are they located.

repeeler · 09-29-2010, 03:20 PM

Quote:

Originally Posted by barry h.

how and did you find them,where in dallas are they located.

I just got lucky while searching for a local place to buy parts because the shipping is so outrageous on large body parts. See my other thread for info.

Rafael505 · 09-29-2010, 02:45 PM

this is I beleave to be the address and Phone,, Adept International Inc
4900 Sharp St, Dallas, TX 75247-6620 (214) 689-0468 ‎

repeeler · 09-29-2010, 03:17 PM

Quote:

Originally Posted by Rafael505

this is I beleave to be the address and Phone,, Adept International Inc
4900 Sharp St, Dallas, TX 75247-6620 (214) 689-0468 ‎

Yes that is it. They have a huge warehouse. They have everything in the catalog in stock. They also supply other american classics from 40's to 80's. While I was there someone was picking up a 65 Mustang hood for $75. The retail side goes by American Muscle Car Solutions. The parts order phone is 214-905-9965. Ask for Tony, he was very helpful.

clos69 · 09-29-2010, 04:30 PM

That's cool ...thanks for the info...do you have anymore of those catalog cd's or do they have a website?

shiner2001 · 09-29-2010, 05:10 PM

I just called and ordered one of the CD's myself. I haven't seen a website for them, does anyone have anything along those lines?

Rafael505 · 09-29-2010, 05:15 PM

as far as i know they dont have a website,, that would be nice if they did.

repeeler · 09-29-2010, 05:33 PM

Quote:

Originally Posted by Rafael505

as far as i know they dont have a website,, that would be nice if they did.

They do not have a website. But they do have an E-Bay store. That is how I found them. But they only have a small fraction of items on E-Bay.
http://stores.ebay.com/AMERICAN-MUSC...PART-SOLUTIONS

bradley7576 · 09-29-2010, 05:49 PM

this is so awesome!!!!!!!!!!!!!!!!on the phone with them now.

09-29-2010, 02:07 PM	#1
repeeler Registered User Join Date: Jun 2005 Location: Saginaw, Texas Posts: 79	Found a Parts Manufacturer in Dallas I bought some parts today from a place in Dallas called Adept industries. I bought a radiator support for $165 and inner fender for $69 and a window regulator for $32. I thought the prices were reasonable and the quality seems good. They said they supply LMC, Goodmark and others. Just thought I would pass this on. By having them local I saved a ton on shipping these large parts, plus they were a few bucks cheaper than the online retailers. BTW, they gave me 2 extra Parts catalog CD's if any of you DFW guys want one. __________________ Ray 1971 Cheyenne LWB 1965 C-10 Short Fleetside 350/350 2010 Harley Davidson FLHTK Last edited by repeeler; 09-29-2010 at 02:11 PM.

09-29-2010, 02:16 PM	#2
dag19 Registered User Join Date: Apr 2010 Location: Austin TX Posts: 135	Re: Found a Parts Manufacturer in Dallas Oh nice!! That is a good bit of info to know. I am new to the area here and have been looking for a store like that. Those do seem like good prices and if they supply those places it should be "as good as factory". That is cool! I'd be interested in a CD

09-29-2010, 02:27 PM	#3
barry h. Registered User Join Date: Jul 2010 Location: Arlington,Tx Posts: 103	Re: Found a Parts Manufacturer in Dallas how and did you find them,where in dallas are they located.

09-29-2010, 02:45 PM	#5
Rafael505 Registered User Join Date: Oct 2008 Location: Los Town, New mexico Posts: 217	Re: Found a Parts Manufacturer in Dallas this is I beleave to be the address and Phone,, Adept International Inc 4900 Sharp St, Dallas, TX 75247-6620 (214) 689-0468 ‎ __________________ Check out my Photos http://67-72chevytrucks.com/gallery/...ry.php?cat=769 L.L. N.M. 63 chevy c-10 67 chevy c-10 71 chevy Blazer 4x4

09-29-2010, 04:30 PM	#7
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Found a Parts Manufacturer in Dallas That's cool ...thanks for the info...do you have anymore of those catalog cd's or do they have a website? __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

09-29-2010, 05:10 PM	#8
shiner2001 Registered User Join Date: Sep 2010 Location: Fort Worth, TX Posts: 222	Re: Found a Parts Manufacturer in Dallas I just called and ordered one of the CD's myself. I haven't seen a website for them, does anyone have anything along those lines? __________________ Derek 72 Chevy Cheyenne Super LWB 454 SS LS6 90 GMC Suburban V2500 350 ----------- 64 Chevy El Camino 357 73 Jeep Wagoneer 360 78 Jeep Cherokee 360 79 Scout II 345 88 Jeep Wrangler 4.2L 91 Jeep Wrangler 4.3L 98 Lincoln Mark VIII 4.6L 01 GMC Yukon 5.3L *"If it's not broken, fix it 'till it is!"*

09-29-2010, 05:15 PM	#9
Rafael505 Registered User Join Date: Oct 2008 Location: Los Town, New mexico Posts: 217	Re: Found a Parts Manufacturer in Dallas as far as i know they dont have a website,, that would be nice if they did. __________________ Check out my Photos http://67-72chevytrucks.com/gallery/...ry.php?cat=769 L.L. N.M. 63 chevy c-10 67 chevy c-10 71 chevy Blazer 4x4

09-29-2010, 05:49 PM	#11
bradley7576 Registered User Join Date: Jun 2010 Location: Dallas, texas Posts: 51	Re: Found a Parts Manufacturer in Dallas this is so awesome!!!!!!!!!!!!!!!!on the phone with them now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.