Heat and sound barriers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JoeKan · 02-23-2019, 02:07 PM

When you all carpet your trucks, do you install heat and/or sound barriers first? Does It Make A Big difference?

**mongocanfly** · 02-25-2019, 06:49 PM

I would put down some kinda insulating pad/layer....theres all kinds out there to choose from...

AZ 67 C10 · 02-25-2019, 10:23 PM

It makes enough of a difference that I would put some down. It doesn't need to be a major name brand either, the cheaper stuff works well, and it comes in different sizes and thickness too.

BR3W CITY · 02-26-2019, 11:58 AM

Everything except the roof got some peel n stick. The rear cabwall got an extra layer of heavier deadener from the window down. Firewall also got a heat barrier layer.

JoeKan · 07-25-2019, 10:16 PM

Finally getting around to doing this. What's a good company to get heat barrier and insulation from? I'm going to order my carpet from Stock Interiors. Would that be a good place to get the hear/insulation too? Thanks!

**TKCR** · 07-28-2019, 10:11 PM

I did this when I redid my interior. I put the Peel & Stick on the floor, back wall and on the ceiling, before putting the headliner back in. This is what I did:
On the floor, I had quite a bit of FatMat left over from a previous job. It wasn’t enough, so I got some Peel & Stick from Lowes. It is pretty much the same stuff as the FatMat, just cheaper.
Then put the original Tar Mat, from the factory back down. Then put a layer of jute backed foil down. I got this from Home Depot online. Use foil tape to adhere the edges to the floor, and on the seams.
https://www.homedepot.com/p/UltraTou...1406/100656748
Then the new carpet was put down. It also had jute backing. The back wall, I put the cardboard tool tray in and put Amp/speaker carpet on it. I believe it has made the cab a lot more quiet. When I first got the truck, the cab was so noisy, you had to talk pretty loud to be heard. Plus the floor doesn’t get hot around your feet, like it did at first.

JoeKan · 07-29-2019, 07:37 AM

Thanks TKCR, that's what I was looking for. You did a nice job on your your truck.

**TKCR** · 07-29-2019, 11:00 AM

Quote:

Originally Posted by JoeKan

Thanks TKCR, that's what I was looking for. You did a nice job on your your truck.

Thanks! And I forgot this part too, I also got this stuff from Home Depot. I stuffed it up in the corners, behind the speakers. I took it up as far as I could get my arm. I also made a few small updates to the post above.

https://www.homedepot.com/p/UltraTou...-202709974-_-N

**Wikid61** · 07-29-2019, 11:45 PM

https://www.fatmat.com/

Chris(NJ) · 08-01-2019, 07:50 AM

Quote:

Originally Posted by JoeKan

Finally getting around to doing this. What's a good company to get heat barrier and insulation from? I'm going to order my carpet from Stock Interiors. Would that be a good place to get the hear/insulation too? Thanks!

I get all of mine from Second Skin Audio.

mikelom · 08-21-2019, 11:28 PM

I used dynamat extreme on my car and I'm very pleased with its quality and performance.

02-23-2019, 02:07 PM	#1
JoeKan Registered User Join Date: Jul 2008 Location: Kansas Posts: 707	Heat and sound barriers When you all carpet your trucks, do you install heat and/or sound barriers first? Does It Make A Big difference?

02-25-2019, 06:49 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,663	Re: Heat and sound barriers I would put down some kinda insulating pad/layer....theres all kinds out there to choose from... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-25-2019, 10:23 PM	#3
AZ 67 C10 Registered User Join Date: May 2017 Location: Goodyear, AZ Posts: 70	Re: Heat and sound barriers It makes enough of a difference that I would put some down. It doesn't need to be a major name brand either, the cheaper stuff works well, and it comes in different sizes and thickness too.

02-26-2019, 11:58 AM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Heat and sound barriers Everything except the roof got some peel n stick. The rear cabwall got an extra layer of heavier deadener from the window down. Firewall also got a heat barrier layer. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

07-25-2019, 10:16 PM	#5
JoeKan Registered User Join Date: Jul 2008 Location: Kansas Posts: 707	Re: Heat and sound barriers Finally getting around to doing this. What's a good company to get heat barrier and insulation from? I'm going to order my carpet from Stock Interiors. Would that be a good place to get the hear/insulation too? Thanks!

07-28-2019, 10:11 PM	#6
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,965	Re: Heat and sound barriers I did this when I redid my interior. I put the Peel & Stick on the floor, back wall and on the ceiling, before putting the headliner back in. This is what I did: On the floor, I had quite a bit of FatMat left over from a previous job. It wasn’t enough, so I got some Peel & Stick from Lowes. It is pretty much the same stuff as the FatMat, just cheaper. Then put the original Tar Mat, from the factory back down. Then put a layer of jute backed foil down. I got this from Home Depot online. Use foil tape to adhere the edges to the floor, and on the seams. https://www.homedepot.com/p/UltraTou...1406/100656748 Then the new carpet was put down. It also had jute backing. The back wall, I put the cardboard tool tray in and put Amp/speaker carpet on it. I believe it has made the cab a lot more quiet. When I first got the truck, the cab was so noisy, you had to talk pretty loud to be heard. Plus the floor doesn’t get hot around your feet, like it did at first. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR Last edited by TKCR; 07-29-2019 at 10:41 AM.

07-29-2019, 07:37 AM	#7
JoeKan Registered User Join Date: Jul 2008 Location: Kansas Posts: 707	Re: Heat and sound barriers Thanks TKCR, that's what I was looking for. You did a nice job on your your truck.

07-29-2019, 11:45 PM	#9
Wikid61 Post Whore Join Date: Aug 2013 Location: anamosa iowa Posts: 58,027	Re: Heat and sound barriers https://www.fatmat.com/ Attached Images

08-21-2019, 11:28 PM	#11
mikelom Registered User Join Date: Mar 2018 Location: GA Posts: 104	Re: Heat and sound barriers I used dynamat extreme on my car and I'm very pleased with its quality and performance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.