TX 67-72 Front Crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thundarr · 10-12-2021, 04:19 PM

I need to find a straight and solid front crossmember. It not the engine & suspension support crossmember. I'm looking for the structural brace forward of that for frame support.

This is my broken and bent one now.

**1rippen6** · 10-12-2021, 08:44 PM

I have one 75 plus shipping, I'll grab you some pictures Thursday if still interested.

**1rippen6** · 10-13-2021, 11:03 AM

Here you go

Thundarr · 10-14-2021, 03:52 PM

Is the metal is split next to that hole on the bottom or is that something else?

If it's split, where do I send the money?

**1rippen6** · 10-14-2021, 05:15 PM

Quote:

Originally Posted by Thundarr

Is the metal is split next to that hole on the bottom or is that something else?

If it's split, where do I send the money?

That's a piece of wire tied on there, send me your zip and I can get a shipping quote. Pp works for me if you have that, if not money order works also.

Thundarr · 10-15-2021, 01:46 PM

Quote:

Originally Posted by 1rippen6

That's a piece of wire tied on there, send me your zip and I can get a shipping quote. Pp works for me if you have that, if not money order works also.

Fantastic!

Zip is 75234.

I'll PM you my full contact info.

**special-K** · 12-13-2021, 10:28 AM

That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo!

No point in moving now I guess

**1rippen6** · 12-15-2021, 12:31 AM

Quote:

Originally Posted by special-K

That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo!

No point in moving now I guess

LOL, it just happened to catch my eye on the last post section so I checked it out!

**special-K** · 12-15-2021, 06:13 AM

The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs

Madkidd007 · 12-16-2021, 10:58 PM

Quote:

Originally Posted by special-K

The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs

The irony in what you just said, I convinced my dad to use one on his. Doing a cummins swap and needed a good suspension setup that kept it 8 lug. A 5/8 steel plate on each side used as a shim, drill a few holes, put on a rack and pinion and done!!! Frame rails have the same taper front to back just 1.25” narrower is all.

**special-K** · 01-02-2022, 08:15 AM

Well there ya go! It really is a thing. I think this is the most interesting, and gainful, thread I had ever seen! Happy New Year! Keep 'em rollin'!

10-12-2021, 04:19 PM	#1
Thundarr Registered User Join Date: May 2013 Location: Coppell, Texas Posts: 176	67-72 Front Crossmember I need to find a straight and solid front crossmember. It not the engine & suspension support crossmember. I'm looking for the structural brace forward of that for frame support. This is my broken and bent one now. __________________ 1971 GMC C15 Sierra Grande SWB 1972 Chevy C10 Custom Deluxe LWB 2018 GMC Yukon Denali

10-12-2021, 08:44 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: 67-72 Front Crossmember I have one 75 plus shipping, I'll grab you some pictures Thursday if still interested.

10-13-2021, 11:03 AM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: 67-72 Front Crossmember Here you go Attached Images

10-14-2021, 03:52 PM	#4
Thundarr Registered User Join Date: May 2013 Location: Coppell, Texas Posts: 176	Re: 67-72 Front Crossmember Is the metal is split next to that hole on the bottom or is that something else? If it's split, where do I send the money? __________________ 1971 GMC C15 Sierra Grande SWB 1972 Chevy C10 Custom Deluxe LWB 2018 GMC Yukon Denali

12-13-2021, 10:28 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67-72 Front Crossmember That worked out well. Post a WTB for a 67-72 part on the Pre-47 parts board and bingo! No point in moving now I guess __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-15-2021, 06:13 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67-72 Front Crossmember The funny thing is that was the post showing on the main page since 10/15 and it just caught my eye yesterday. Before looking at the post it made me wonder if maybe guys were doing 67-72 truck clips on Advance Designs __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-02-2022, 08:15 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67-72 Front Crossmember Well there ya go! It really is a thing. I think this is the most interesting, and gainful, thread I had ever seen! Happy New Year! Keep 'em rollin'! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.