NC WTB: speedometer driven gear NP205 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dutchmanz** · 05-16-2014, 07:50 AM

I need the metal driven gear that the cable slides into. Anybody have one that's usable? Tooth count is not really an issue, I just need some speed registered so I can calibrate it later.

**1rippen6** · 05-16-2014, 11:12 AM

Are you talking about the piece that screws onto the 205 I should have one how is 25 shipped. I can get you a picture tonight. LMK

**dutchmanz** · 05-16-2014, 02:00 PM

Quote:

Originally Posted by 1rippen6

Are you talking about the piece that screws onto the 205 I should have one how is 25 shipped. I can get you a picture tonight. LMK

The one I need looks like this. If that's what you have, I'll take it. PM me a pic when you can and some payment info.

**1rippen6** · 05-16-2014, 02:02 PM

Sorry I think the piece I am taking about screws onto that

**1rippen6** · 09-06-2014, 06:20 PM

Did you ever find what you needed?

**dutchmanz** · 09-07-2014, 09:21 AM

Well... Sort of. I was able to take another gear that had a broken cable end, mine with the worn gear end, and make one good piece. I cut them both in half and tig welded the 2 good halves together. I still need a gear for a friends truck that supplied the other broken part. I should have taken pics.

**1rippen6** · 09-07-2014, 09:17 PM

Here is a picture of what I have 45 shipped if interested.

05-16-2014, 07:50 AM	#1
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	WTB: speedometer driven gear NP205 I need the metal driven gear that the cable slides into. Anybody have one that's usable? Tooth count is not really an issue, I just need some speed registered so I can calibrate it later. __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

05-16-2014, 11:12 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB: speedometer driven gear NP205 Are you talking about the piece that screws onto the 205 I should have one how is 25 shipped. I can get you a picture tonight. LMK

05-16-2014, 02:02 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB: speedometer driven gear NP205 Sorry I think the piece I am taking about screws onto that

09-06-2014, 06:20 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB: speedometer driven gear NP205 Did you ever find what you needed?

09-07-2014, 09:21 AM	#6
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: WTB: speedometer driven gear NP205 Well... Sort of. I was able to take another gear that had a broken cable end, mine with the worn gear end, and make one good piece. I cut them both in half and tig welded the 2 good halves together. I still need a gear for a friends truck that supplied the other broken part. I should have taken pics. __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

09-07-2014, 09:17 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB: speedometer driven gear NP205 Here is a picture of what I have 45 shipped if interested. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.