70 NOS Grille Sell or Keep?

[70cst]

Ok This is my question...
About five years ago I purchased an NOS grille for my 70cst. Back then one could not get repros grilles with the black letters. Now I see you can. Since I am not going to restore my truck to Barret Jackson standards am I better purchasing a repro which looks as nice and sell the NOS grille to someone who has to have all NOS parts on their restoration. I have already asked one with vast knowledge of these trucks and he gave me his recommendation which I appreciate so now I ask what would you do if you were in my situation. I can probably sell the NOS grille and purchase a repro with money left over. I then can put the extra money into other areas of my truck. So…what would you do?

[LUV2XCLR8]

Actually you can still get a sorta NOS one, GM still sells them, but as you
said the lettering is not black, at least I think not, Tim Christian had one
at Memphis Super Chevy last year in the $450 range IIRC, Hope it helps.

[As2rd]

If you are not gonna use it, find someone who is buying NOS parts. Ask them for an appraisal and sell it, if you think its a reasonable price. Grilles are hard to come by for a good price. But I would sell it to someone who is going to use it.---Andy

[70cst]

This is a NOS Grille with the black letters. If I decide to sell it I would prefer to sell it to someone who has a truck they are restoring verses someone who wants to purchase it and then resell it for a fast buck.

[see ten]

I would keep it being as it is paid for. In my experience there is no substitute for the fit of a NOS part. Of course if you are in a tight for cash it should be easy to move. I would probably send it to Ebay to get the maximum return on it.

[meathead95]

Originally Posted by see ten

I would keep it being as it is paid for. In my experience there is no substitute for the fit of a NOS part. Of course if you are in a tight for cash it should be easy to move. I would probably send it to Ebay to get the maximum return on it.

i


i agree there is no way i would sell a nos part to replace it with a repop part. my truck buil has taken twice as long becuse i am collecting all nos parts for it

and you are incorrect luv the gm dealer hasnt carried the 69/70 grilles for years

[Rokcrln]

Come on you knew it was bound to happen!
Also I think you should donate to my 70 2WD Blazer build

Kevin
LFD Inc.

[70cst]

Hey Rokcrln
Is then when I say "Trust Me." The grille is in the parents attic.

[byrd]

You can still get them @ www.gmpartsdirect.com

[steppside69]

If you were to sell it, what is the going price for nos grill????????????

[Rokcrln]

Originally Posted by 70cst

Hey Rokcrln
Is then when I say "Trust Me." The grille is in the parents attic.

Ok now that is so un-cool to use my crap against me like that. Trust me it was much funnier when I did it

Kevin
LFD Inc.

[70cst]

GM PART # 3985054
PACK QTY: 1 CORE CHARGE: $0.00
GM LIST: $808.94
OUR PRICE: $496.36
1970 C10

DESCRIPTION: GRILLE
OUTER

WOW I think???
That doesn't look to bad for NOS. Now I wonder if these grilles have the black lettering?
Secondly...thanks BYRD for the GM site.

[byrd]

Your welcome I believe all true NOS grill have the black lettering on it, but I am usually wrong, just ask my wife

[70cst]

Hey Rokcrln
Gee I don't know what got into me I must have had another senior moment that I think I'm going to not
I love this board...it just makes me want to dance
Sometime I feel like I'm getting GRILLEd...get it HeHeHe

[ktgooch]

If You Go To Sell It I'd Like To Be Put In Line. I Passed Up One At Swap Meet For $200 A Few Weeks Ago. Thought I Was Clever And Was Going To Get A Bargin. Brand Friggin New. I'm Obviously Not As Smart As I Think I Am.

[special-K]

Ok,N.O.S. ran out in the late`80s...FACT!Then came repro in the aftermarket.Then came GM licensed repro in the aftermarket.Then came GM Restoration Parts.The latter two are one in the same.GM just figured out they were missing out on a market.What you buy now from GM Parts is the same reproduction part anyone else is selling if it is marked GM licensed.I`ve been buying these parts from the same dealer for 30 years and have followed this through it all.
If you can find a quality repro part that you can varify fits for a resto/driver, I`d sell the N.O.S. to an elitist for top dollar leaving no room for mark-up.

[72-stomper]

Does it look something like this?




I have the original boxes dated 1977....
I am also not sure what I am going to do with mine...

[70cst]

special-K
If I decide to sell it I want the buyer to one who is going to install it on his/her truck. I bought this grille before the repros were out (the ones w/black letters). If I could make a profit I would use the extra money to put back into my truck. As mentioned my truck will not be a trailer queen and it will be driven and some day I will hand it down to my son. I appreciate all the feedback.

[special-K]

I hear you.I`ve come to the same point with some of my N.O.S. parts and the reality that I wasn`t going to build "The Ultimate K/20" that I had planned and gathered parts for.I sold a tailgate(I have nice original/used ones),a dash pad,and all console pieces to make one and it put 4 digits in my pocket.

[PICKMUP]

You know with this many people on here, you will get a lot of answers to any question. Some of them may even be right!
GM sells new grills with the black letters embossed on them. They are new GM. I would call that NOS. No better or worse than those from 10-20 years ago...just expensive! The GM aluminum is definitely stronger than the softer repros.
I don't know of any repros with the letters embossed---only smooth with stick on decals. GM will not release the license to stamp the CHEVROLET name on the repros-yet, while they still have them.
Anyone that knows better, please correct me...IF you really know and aren't just guessing.

[67ChevyRedneck]

You have a grill in excellent condition.....

PUT IT ON THE TRUCK

[70cst]

PICKMUP...
You just said something that I didn't realize. I thought you could get repros with the emboossed black letters. But if I understand you correctly all the repros are smooth w/o letters. Again I thought I had all my facts. This info will help me make my decision.
I am glad there are those with knowledge greater than mine who is willing to share their vast knowledge with those of us who are a little short of truck smarts. Thanks again.

[special-K]

I call it new re-issue.May be just as good,but nothing old about that stock.N.O.S. is hard to come by.It`s easy to go get a new part,yet expensive.I never started a business(officially),but I`ve been into the evolution of this whole thing from the begining.I wouldn`t say something if it wasn`t true.Once computers came around the dealer parts world,guys like Seth Doulton went about locating and cleaning out old stocks around the nation.I met Seth back in the`70s when he was first starting into the old Chevy truck parts game.He was into AdvanceDesign and I was into the NewBreeds and we`d help each other when we found parts the other was looking for.He saw the depletion in sight and started into the process of putting together dies to stamp parts fom prints.I`m like everyone else.I`m still listening and learning and try to not come off as a know-it-all,but enjoy offering what I know.These new parts are made from original prints,I believe.I don`t see anything as good as N.O.S. unless,maybe it was stamped from the same dies.Few dies survived being scrapped.
Not trying to make stink,just holding my ground.

[70cst]

It comes down to this when making an informed decision...
Research...Ask...Research...Ask...etc.
Again I appreciate all the feedback on helping me make my decision.
70cst

[High Speed low Drag]

If any of you guys actually wants to sell one of them, PM me with a price. I'm about to have to make a decision on "GM licensed" repro or the less expensive "it'll do for now" part. An actual NOS would swing my decision if the price were within range.