Spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VDOG · 07-14-2005, 01:22 PM

I was wondering will 71-72 disk brake spindles will work on my 69 without modifcations. I just got a set of Rally wheels (will post pics later) and I need to go from 6 lug to 5.

Thanks

boraxman · 07-14-2005, 01:28 PM

Yes. but you need to changes upper and lower ball joints to 71-2 and use inner tie rods for outer and get inner tie rods for 71-2. You will also need the adapter to connect the new tie rod configuration. Vendors have them...have fun

VDOG · 07-14-2005, 01:36 PM

Dangit!!
Still sounds like extra work. I figured that would be easier than installing 73-87 spindles becaause 71-72 is the same bodystyle.

**Classic Heartbeat** · 07-14-2005, 01:41 PM

You could always buy a set of 63-70 standard or drop disk brake conversion spindles. Then you could put the 5 lug setup on it. We have them in stock. then you can install them with your ball joints and tie rod ends. WES www.ClassicHeartbeat.com

boraxman · 07-14-2005, 01:41 PM

Ya I did my '70 and it was alot of work.
Also(forgot to add) you will need to change the master/booster to a 71-2 along with the correct prop valve and brake lines.

It got a little costly even using used parts where I could.

If you decide to tackle it and need help or advise PM me.

VDOG · 07-14-2005, 01:48 PM

I was trying to keep the cost down seeing that money is an issue right now.
But it seems to me that I might as well just buy them new.
What part of So Cal do you live?

boraxman · 07-14-2005, 02:03 PM

30 mi. N. of L.A. in Santa Clarita.

VDOG · 07-14-2005, 02:07 PM

Ok not to far from Magic Mountain, I have family in Stevenson's Ranch.

07-14-2005, 01:22 PM	#1
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Spindles I was wondering will 71-72 disk brake spindles will work on my 69 without modifcations. I just got a set of Rally wheels (will post pics later) and I need to go from 6 lug to 5. Thanks

07-14-2005, 01:28 PM	#2
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Yes. but you need to changes upper and lower ball joints to 71-2 and use inner tie rods for outer and get inner tie rods for 71-2. You will also need the adapter to connect the new tie rod configuration. Vendors have them...have fun __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

07-14-2005, 01:41 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	You could always buy a set of 63-70 standard or drop disk brake conversion spindles. Then you could put the 5 lug setup on it. We have them in stock. then you can install them with your ball joints and tie rod ends. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 07-14-2005 at 01:41 PM.

07-14-2005, 01:41 PM	#5
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Ya I did my '70 and it was alot of work. Also(forgot to add) you will need to change the master/booster to a 71-2 along with the correct prop valve and brake lines. It got a little costly even using used parts where I could. If you decide to tackle it and need help or advise PM me. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

07-14-2005, 02:03 PM	#7
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	30 mi. N. of L.A. in Santa Clarita. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

07-14-2005, 01:36 PM	#3
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Dangit!! Still sounds like extra work. I figured that would be easier than installing 73-87 spindles becaause 71-72 is the same bodystyle.

07-14-2005, 01:48 PM	#6
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	I was trying to keep the cost down seeing that money is an issue right now. But it seems to me that I might as well just buy them new. What part of So Cal do you live?

07-14-2005, 02:07 PM	#8
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Ok not to far from Magic Mountain, I have family in Stevenson's Ranch.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.