having issues with my manuel clutch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10nv · 06-06-2011, 07:39 PM

hey everyone new to the site so hi to u all.
Okay the issue is i have a 69 c10 longbed step side with a 350.
I bought the truck to build after putting it back to geather i found that the push rod and bellcrank are missing and i couldnt find one so i made one but the pushrod to the clutch fork is to short could i have put the pivot ball in the wrong location? or how much would it be to switch to hydralic if any one knows

yuccales · 06-06-2011, 09:15 PM

I just went out and took a pic of mine, but I'm no photographer, so I don't think my picture will help you. I'm sure there has to be someone in Reno/Sparks with a manual trans that might pop open their hood and let you take a look. Good luck to you.

treveiger · 06-06-2011, 10:36 PM

I'll load some up of my manual linkage just give me a sec
Posted via Mobile Device

treveiger · 06-06-2011, 10:50 PM

The linkage also mounts to my block for a heads up.
Posted via Mobile Device

69c10nv · 06-12-2011, 02:50 PM

thanks so much for the pics they actully helped alot. I had the pivot ball in the wrong location

treveiger · 06-12-2011, 05:24 PM

Hey no problem I was taking my motor out and it was my first time so I took A LOT of pics

.
Posted via Mobile Device

06-06-2011, 07:39 PM	#1
69c10nv Registered User Join Date: Jun 2011 Location: sparks nevada Posts: 2	having issues with my manuel clutch hey everyone new to the site so hi to u all. Okay the issue is i have a 69 c10 longbed step side with a 350. I bought the truck to build after putting it back to geather i found that the push rod and bellcrank are missing and i couldnt find one so i made one but the pushrod to the clutch fork is to short could i have put the pivot ball in the wrong location? or how much would it be to switch to hydralic if any one knows

06-06-2011, 09:15 PM	#2
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,722	Re: having issues with my manuel clutch I just went out and took a pic of mine, but I'm no photographer, so I don't think my picture will help you. I'm sure there has to be someone in Reno/Sparks with a manual trans that might pop open their hood and let you take a look. Good luck to you. Last edited by yuccales; 06-10-2011 at 05:41 PM.

06-06-2011, 10:36 PM	#3
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: having issues with my manuel clutch I'll load some up of my manual linkage just give me a sec Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

06-06-2011, 10:50 PM	#4
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: having issues with my manuel clutch The linkage also mounts to my block for a heads up. Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

06-12-2011, 02:50 PM	#5
69c10nv Registered User Join Date: Jun 2011 Location: sparks nevada Posts: 2	Re: having issues with my manuel clutch thanks so much for the pics they actully helped alot. I had the pivot ball in the wrong location

06-12-2011, 05:24 PM	#6
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: having issues with my manuel clutch Hey no problem I was taking my motor out and it was my first time so I took A LOT of pics. Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.