Helping out GMC Junkie - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 07-17-2005, 10:54 PM

If you haven't read this already, GMC Junkie (Jodie for those who know her) is looking at some tough times. She was looking at selling her beloved Suburban, which none of us what to see happen...and in all reality, she didn't want to let it go either.
It took some coaxing, but we got her to accept our help, and now it looks as if she can keep her rig. Many of us are donating tools and other items for the cause. I'm not sure if she wants to give her addy out to everyone on here...or maybe some one can channel it all to her, that hasn't been worked out yet.
However, to get the ball rolling, here is what I gathered to send to her.
There's a few more items i have at the shop that I can toss in here too, but for the best part, this is everything I can give to her.

Longhorn Man · 07-17-2005, 10:55 PM

And the bottom 2 drawers....

Longhorn Man · 07-17-2005, 10:57 PM

Lets try to list what we have on this thread so she doesn't end up with 35 9/16 inch wrenches and no 3/8 inch wrench.

Most of the tools I have in this box are mis matched better off in the trunk as an emergency kit type tools. And if some one else does have better items, then she can use these as so. However, here's what I have ready to be shipped;
top of box
3/8 inch drive sockets, both short and deep from 3/8 inch up to 13/16.
2 spark plug sockets
1/4 inch drive sockets short 5/32 to 1/2 inch, and deep 5/16 to 1/2 inch. (couple missing, think I have them at work)
Feeler guage
couple 3/8 inline fuel filters I've had for 5 years layin around.
windshield service reminder stickers
www.67-72chevytrucks.com magnet in the lid.

sharpie marker.
Tape measure (not pictured)
Drawer #1
Butt load of itty bitty wrenches.
5/16 - one inch wrenches. Some craftsman, some crappy no names, all servicable.
Drawer #2
a few screw drivers...not many though
a few Torx bit screwdrivers
electrical crimp on kit with some vac line caps and light bulbs thrown in.
I have some wire strippers and crimper tool at work I can toss in there too.
Drawer #3
assorted zip ties
2 allen wrench sets, metric and standard...couple wrenches missing
6 inch and 12 inch adjustable wrenches (12 inch not shown)
pair of dikes
small channel lock pliers
Drawer #4
1/4 in drive rachet & a few extentions and a universal
propain bottle torch head (ignition button broke...gotta use a bick)
utility knife complete with rusty blade

small box cutter knife
1/2 inch rachet with 10 inch and 5 inch extentions and universal (not shown)
1/2 inch sockets 1/2 inch to 15/16...3/4 missing...might have that one...may not
3/8 rachet, short
3/8 rachet, stubby (not pictured)
3/8 rachet, long handle, floppy adjustable head (not pictured)
short breaker bar
few assorted extentions and universal.

lloyd k · 07-17-2005, 11:14 PM

hey that looks like my toolbox-just kidding,if i run accross something im willing to part with ill let you know p.s. thats a really nice thing your doing

Longhorn Man · 07-17-2005, 11:22 PM

Not just me...not even really my idea. i just want to make sure she is taken care of. Besides...I owe her one...a big one.

barn9 · 07-17-2005, 11:32 PM

I was going to dig some mis-matched wrenches out that I have stored away, but it looks like Andy already has me topped in that department. Nice work Andy! I will look and see if I can add anything though. And I do have her address if you need it.

Longhorn Man · 07-17-2005, 11:34 PM

I gots it already.

ClayMore_5by5 · 07-17-2005, 11:36 PM

I'm still unpacking my tools and stuff from my divorce, but I'm sure I can come up with something. Even duplicates can be used as trade goods.

shifty · 07-17-2005, 11:36 PM

Actually - I'm totally willing to help and shipping is cheap.

Please PM me with a list of things that you think would be reasonable to donate. I know there are a truckload of name-brand tools (and sets of tools) that can be purchased and shipped for under $50. I'm part of some Craftsman club at Sears and get 10-15% off of everything on given days, so ... I feel like I'm in a place to help. I've been similarly in positions like hers my whole life, so ... I can relate and would like to help.

barn9 · 07-17-2005, 11:51 PM

I know a sander would come in handy for her when she tackles the barn doors on the back of the Burb, but I'm guessing she does not have an air compressor.
Another thing she could definately use is a digital camera if anyone has one they're not using any more. That would be huge for her, then she could take pics of those barn doors in order to get some coaching on what to do to fix them. And the bonus for all of us would be that she could post pics of herself and her Burb, LOL!

**tnblazerk5** · 07-18-2005, 01:01 AM

i got a smaller tool box for her to carry in the burb and sum sand paper and maybe even electric sander ,if it still works and i can find it, and sum tools like wire stripers and well i need to see what all

krue · 07-18-2005, 01:04 AM

Another option may be gift cards (like sears) where she can buy some of the tools she needs w/o having to pay a ton of shipping.

69 Short Fleet · 07-18-2005, 06:51 AM

Very cool Andy! Nice start.

I have a 1/2" Torque wrench & Multi-meter (for checking Voltage, Ohms, ect.) And I might have a oil filter wrench (gotta double check on the last one).

68C15 · 07-18-2005, 06:58 AM

I have a Craftsman mid box. I will have to look at work to see what else.

uh...at the risk of sounding like a jerk, whatsup?

68C15 · 07-18-2005, 07:01 AM

scratch that, I have 2 mid boxes. pics to follow tonight along with a list of other items.

**BOSS** · 07-18-2005, 07:17 AM

I have an older digi camera,i just need to find the disk and cord for it,i will try to find it tonight and let you know.If i can find it i will need someone to pm me her addy.

panhandler62 · 07-18-2005, 07:45 AM

I can chip in an electric orbital. If someone can PM me a good addy to mail it to I will get it out soon.

(Maybe one of you guys that knows her can relay? I sure understand that a woman wouldn't want to advertize an addy on the inet in any way!)

Mudder · 07-18-2005, 08:29 AM

Thank you Andy. I am looking at 2.5 ton floor jacks. I'm thinking it would be best for her to get it locally.

edit........ going through Sears. They have jack and stands on sale for one price.

GMCjunkie · 07-18-2005, 10:02 AM

Andrew!! Thank you for this thread. And thank you for all youre doing!! Thanks to everyone who has PMed me. and to all who are sending "stuff"... Its hard for me to know what to say, with out getting all mushy!! lol. Y'all'er an awsome buncha people, And Randy... YES you are sweet!! You aint gonna win this one!! Thanks for the call. Its hard for me to feel lonley for too long around here, I just jump online and heres all my "Truck Angels" Thank you all so much!! I really appreciate everything!! When and where is the next truck meet?? I gotta make it this year!!! I have a lot of "in person" Thank Yous to attend to!!!

Thank You!!!

junk

KOOLmike · 07-18-2005, 10:18 AM

Hi, I'm new here, but I wouldn't mind helping out! Where I work, I have fairly easy access to a variety of handtools such as dikes, needle nose pliers, impact sockets, etc. They may be used, but they'll work just fine. Let me know if I can be of assistance.

biglou55 · 07-18-2005, 10:44 AM

Krue that is a good idea. If andy want.s to pm me his addy and a name to put on it I will send a m.o. there is always something (Junk) will need to buy locally ( sand paper -bondo-fiberglass- oil gaskets-etc-etc- ) I can understand jody not wanting her adress splashed all over the web. what ever i can do to help a family member.

bagged91 · 07-18-2005, 03:16 PM

I have an extra timing light, 12V test light and I think an extra cordless drill somewhere... My neighbor may have some stuff he's willing to donate. I'lle have him post later...

Good Luck!
Joe

Mudder · 07-18-2005, 03:37 PM

floor jack and stands are on their way......... remember Jodie to be safe and don't be under the dang thing unless you are using the jack stands along with the jack.

tomatocity · 07-18-2005, 03:42 PM

pm sent

shifty · 07-18-2005, 03:57 PM

There's been a lot of stuff suggested. Has anyone made a list to make sure she won't end up with 8 pairs of channel locks, 4 sets of ¼" drive metric sockets, 10 different kinds of needlenose pliers, etc? I still have no idea what I can contribute.

07-17-2005, 11:32 PM	#6
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	I was going to dig some mis-matched wrenches out that I have stored away, but it looks like Andy already has me topped in that department. Nice work Andy! I will look and see if I can add anything though. And I do have her address if you need it. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

07-17-2005, 11:36 PM	#8
ClayMore_5by5 Registered User Join Date: Jun 2005 Location: Clever, Missouri Posts: 32	I'm still unpacking my tools and stuff from my divorce, but I'm sure I can come up with something. Even duplicates can be used as trade goods. __________________ '72 C-10 Deluxe '74 Porsche 914 (Skateboard on Meth) '76 Harley XL (Another project) Combat Zen: There is no problem in this world too great or too small that cannot be solved through a careful application of high explosives.

07-17-2005, 11:36 PM	#9
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Actually - I'm totally willing to help and shipping is cheap. Please PM me with a list of things that you think would be reasonable to donate. I know there are a truckload of name-brand tools (and sets of tools) that can be purchased and shipped for under $50. I'm part of some Craftsman club at Sears and get 10-15% off of everything on given days, so ... I feel like I'm in a place to help. I've been similarly in positions like hers my whole life, so ... I can relate and would like to help. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 07-17-2005 at 11:37 PM.

07-17-2005, 11:51 PM	#10
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	I know a sander would come in handy for her when she tackles the barn doors on the back of the Burb, but I'm guessing she does not have an air compressor. Another thing she could definately use is a digital camera if anyone has one they're not using any more. That would be huge for her, then she could take pics of those barn doors in order to get some coaching on what to do to fix them. And the bonus for all of us would be that she could post pics of herself and her Burb, LOL! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

07-18-2005, 01:04 AM	#12
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Another option may be gift cards (like sears) where she can buy some of the tools she needs w/o having to pay a ton of shipping. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-17-2005, 10:54 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Helping out GMC Junkie If you haven't read this already, GMC Junkie (Jodie for those who know her) is looking at some tough times. She was looking at selling her beloved Suburban, which none of us what to see happen...and in all reality, she didn't want to let it go either. It took some coaxing, but we got her to accept our help, and now it looks as if she can keep her rig. Many of us are donating tools and other items for the cause. I'm not sure if she wants to give her addy out to everyone on here...or maybe some one can channel it all to her, that hasn't been worked out yet. However, to get the ball rolling, here is what I gathered to send to her. There's a few more items i have at the shop that I can toss in here too, but for the best part, this is everything I can give to her. Attached Images

07-17-2005, 10:55 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	And the bottom 2 drawers.... Attached Images

07-17-2005, 10:57 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Lets try to list what we have on this thread so she doesn't end up with 35 9/16 inch wrenches and no 3/8 inch wrench. Most of the tools I have in this box are mis matched better off in the trunk as an emergency kit type tools. And if some one else does have better items, then she can use these as so. However, here's what I have ready to be shipped; top of box 3/8 inch drive sockets, both short and deep from 3/8 inch up to 13/16. 2 spark plug sockets 1/4 inch drive sockets short 5/32 to 1/2 inch, and deep 5/16 to 1/2 inch. (couple missing, think I have them at work) Feeler guage couple 3/8 inline fuel filters I've had for 5 years layin around. windshield service reminder stickers www.67-72chevytrucks.com magnet in the lid. sharpie marker. Tape measure (not pictured) Drawer #1 Butt load of itty bitty wrenches. 5/16 - one inch wrenches. Some craftsman, some crappy no names, all servicable. Drawer #2 a few screw drivers...not many though a few Torx bit screwdrivers electrical crimp on kit with some vac line caps and light bulbs thrown in. I have some wire strippers and crimper tool at work I can toss in there too. Drawer #3 assorted zip ties 2 allen wrench sets, metric and standard...couple wrenches missing 6 inch and 12 inch adjustable wrenches (12 inch not shown) pair of dikes small channel lock pliers Drawer #4 1/4 in drive rachet & a few extentions and a universal propain bottle torch head (ignition button broke...gotta use a bick) utility knife complete with rusty blade small box cutter knife 1/2 inch rachet with 10 inch and 5 inch extentions and universal (not shown) 1/2 inch sockets 1/2 inch to 15/16...3/4 missing...might have that one...may not 3/8 rachet, short 3/8 rachet, stubby (not pictured) 3/8 rachet, long handle, floppy adjustable head (not pictured) short breaker bar few assorted extentions and universal. Last edited by Longhorn Man; 07-17-2005 at 11:10 PM. Reason: Some retard hit the enter when i wasn't ready.

07-17-2005, 11:14 PM	#4
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	hey that looks like my toolbox-just kidding,if i run accross something im willing to part with ill let you know p.s. thats a really nice thing your doing __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

07-17-2005, 11:22 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Not just me...not even really my idea. i just want to make sure she is taken care of. Besides...I owe her one...a big one.

07-17-2005, 11:34 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I gots it already.

07-18-2005, 01:01 AM	#11
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	i got a smaller tool box for her to carry in the burb and sum sand paper and maybe even electric sander ,if it still works and i can find it, and sum tools like wire stripers and well i need to see what all

07-18-2005, 06:51 AM	#13
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Very cool Andy! Nice start. I have a 1/2" Torque wrench & Multi-meter (for checking Voltage, Ohms, ect.) And I might have a oil filter wrench (gotta double check on the last one).

07-18-2005, 06:58 AM	#14
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	I have a Craftsman mid box. I will have to look at work to see what else. uh...at the risk of sounding like a jerk, whatsup? __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

07-18-2005, 07:01 AM	#15
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	scratch that, I have 2 mid boxes. pics to follow tonight along with a list of other items. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card



Register or Log In To remove these advertisements.

07-18-2005, 07:17 AM	#16
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	I have an older digi camera,i just need to find the disk and cord for it,i will try to find it tonight and let you know.If i can find it i will need someone to pm me her addy. __________________ Support our site Norwood Survivor

07-18-2005, 07:45 AM	#17
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	I can chip in an electric orbital. If someone can PM me a good addy to mail it to I will get it out soon. (Maybe one of you guys that knows her can relay? I sure understand that a woman wouldn't want to advertize an addy on the inet in any way!) __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

07-18-2005, 08:29 AM	#18
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Thank you Andy. I am looking at 2.5 ton floor jacks. I'm thinking it would be best for her to get it locally. edit........ going through Sears. They have jack and stands on sale for one price. Last edited by Mudder; 07-18-2005 at 08:39 AM.

07-18-2005, 10:02 AM	#19
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Andrew!! Thank you for this thread. And thank you for all youre doing!! Thanks to everyone who has PMed me. and to all who are sending "stuff"... Its hard for me to know what to say, with out getting all mushy!! lol. Y'all'er an awsome buncha people, And Randy... YES you are sweet!! You aint gonna win this one!! Thanks for the call. Its hard for me to feel lonley for too long around here, I just jump online and heres all my "Truck Angels" Thank you all so much!! I really appreciate everything!! When and where is the next truck meet?? I gotta make it this year!!! I have a lot of "in person" Thank Yous to attend to!!! Thank You!!! junk __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-18-2005, 10:18 AM	#20
KOOLmike Registered User Join Date: Jul 2005 Location: Methdependence, MO Posts: 30	Hi, I'm new here, but I wouldn't mind helping out! Where I work, I have fairly easy access to a variety of handtools such as dikes, needle nose pliers, impact sockets, etc. They may be used, but they'll work just fine. Let me know if I can be of assistance.

07-18-2005, 10:44 AM	#21
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Krue that is a good idea. If andy want.s to pm me his addy and a name to put on it I will send a m.o. there is always something (Junk) will need to buy locally ( sand paper -bondo-fiberglass- oil gaskets-etc-etc- ) I can understand jody not wanting her adress splashed all over the web. what ever i can do to help a family member. __________________ Certifiably crazy person

07-18-2005, 03:16 PM	#22
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I have an extra timing light, 12V test light and I think an extra cordless drill somewhere... My neighbor may have some stuff he's willing to donate. I'lle have him post later... Good Luck! Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-18-2005, 03:37 PM	#23
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	floor jack and stands are on their way......... remember Jodie to be safe and don't be under the dang thing unless you are using the jack stands along with the jack.

07-18-2005, 03:42 PM	#24
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	pm sent __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

07-18-2005, 03:57 PM	#25
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	There's been a lot of stuff suggested. Has anyone made a list to make sure she won't end up with 8 pairs of channel locks, 4 sets of ¼" drive metric sockets, 10 different kinds of needlenose pliers, etc? I still have no idea what I can contribute. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 07-18-2005 at 03:57 PM.

Register or Log In To remove these advertisements.