![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2005
Location: Sacramento CA
Posts: 1,255
|
72 StepSide frame damage???
I found a 1972 Cheyenne 10 SSS and it has its flaws but the one I am concerned with is the possible frame damage. I was at the rear of the truck (no tailgate) and looked down to see the bed was not square with the passenger side leading by 3-4". Looked at the back of the cab and noticed the bed had been pushed into the cab on both sides though more damage on the passenger side. Crawled onder the truck but could not see any visible frame damage but I have never seen one of these frames damaged. Your thoughts and experiences? Thanks.
__________________
Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. |
![]() |
![]() |
![]() |
#2 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Could very well have been hit and repaired, alot can happen in 30+ years
![]() I'd start taking some measurements |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2004
Location: Shakopee Minnesota
Posts: 174
|
I had the same type of damage on my SBSS. It turned out that the frame was still ok. Near as I can tell the bolts that go through the wood bed and connect the box to the frame were bent and shifted. But that's only my experience. The truck turned out fine.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2005
Location: Sacramento CA
Posts: 1,255
|
bent bed bolts! that is something I had not thought of. good news.
what points would I measure to check the squareness of a frame? the cab and frontend willstill be mounted.
__________________
Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. |
![]() |
![]() |
![]() |
Bookmarks |
|
|