Temp Sender Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyholic · 01-30-2008, 02:26 AM

Hey guys,

I've got a 71' Chevy with a 350. It has never had a working temp gauge, so I've been working on that lately. I've replaced the thermostat and temp sender, but am at a loss for the type of connector I need for the sender. I traced from the firewall and found the dark green wire, which was clipped for some reason, but I have no idea what kind of connector should be used for this application. The sender came with a hard black plastic housing, but nothing else.

Can someone point me in the right direction?

Thanks for the help!
David

01-30-2008, 02:26 AM	#1
Chevyholic Will it run today? Join Date: Feb 2007 Location: DFW, Texas Posts: 272	Temp Sender Help Hey guys, I've got a 71' Chevy with a 350. It has never had a working temp gauge, so I've been working on that lately. I've replaced the thermostat and temp sender, but am at a loss for the type of connector I need for the sender. I traced from the firewall and found the dark green wire, which was clipped for some reason, but I have no idea what kind of connector should be used for this application. The sender came with a hard black plastic housing, but nothing else. Can someone point me in the right direction? Thanks for the help! David __________________ Jaws, the 1971 Chevy Cheyenne Longbed. She's big, grey, and has an insatiable appetite!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.