The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 02-11-2008, 04:26 AM   #1
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Do you need '64-'66 Chevy Truck Parts?

Do you need parts for your 4-5-6 Chevy Truck project? During the process of collecting and fixing up my trucks, I have acquired many good, used OEM parts for 4-5-6 Chevy Trucks. I am able to ship most parts, however, due to size, weight and cost, some parts, like cabs, frames and beds, are not very economical to ship.

Let me know your 4-5-6 Chevy Truck part needs and I will try to take care of it.
Attached Images
     

Last edited by LILRED66; 08-01-2008 at 04:37 AM.
LILRED66 is offline  
Old 02-11-2008, 05:54 AM   #2
kdrodworks316
KOFFIN DRAGGER
 
kdrodworks316's Avatar
 
Join Date: Jan 2008
Location: st.anthony Idaho
Posts: 864
Re: Do you need '64-'66 Chevy Truck Parts?

i need the pigtails for the hood marker lights. pm me if you can help. thanks
kdrodworks316 is offline  
Old 02-11-2008, 07:53 AM   #3
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

kdrodworks316:

I have several pairs. Do you need the entire park lamp harness or just the pigtails? I have both. I will send you a PM, as well.
LILRED66 is offline  
Old 02-11-2008, 10:50 AM   #4
kdrodworks316
KOFFIN DRAGGER
 
kdrodworks316's Avatar
 
Join Date: Jan 2008
Location: st.anthony Idaho
Posts: 864
Re: Do you need '64-'66 Chevy Truck Parts?

thanks Tony
kdrodworks316 is offline  
Old 02-12-2008, 11:54 PM   #5
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

kdrodworks316:

I am shipping the entire front park lamp harness, because I couldn't see cutting the pig tail sockets off a perfectly good harness. It will ship in the next few days. Thanks for your business.

Tony Smith
LILRED66 is offline  
Old 02-12-2008, 11:55 PM   #6
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

We sell lots of 4-5-6 Chevy Truck parts. Let me know if we can help.
Attached Images
 
LILRED66 is offline  
Old 02-13-2008, 11:50 AM   #7
62 short step
Senior Member
 
62 short step's Avatar
 
Join Date: Aug 2005
Location: Greenwell Springs, Louisiana
Posts: 2,882
Re: Do you need '64-'66 Chevy Truck Parts?

Tony, how much for a good 60-66 grille support? Shipping also to 70739. Thanks, Jeremy.

P.S. Pics too please.
62 short step is offline  
Old 02-13-2008, 12:01 PM   #8
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

62 short step:

I have a few good, used grille supports. I will send you a PM, with description, price, including shipping and pictures. I don't have the pictures, right now, but I will get them to you soon.

Thanks for your interest.

Last edited by LILRED66; 02-13-2008 at 12:02 PM.
LILRED66 is offline  
Old 02-14-2008, 01:05 AM   #9
arisaka
Registered User
 
Join Date: May 2007
Location: New Bern,NC
Posts: 2
Re: Do you need '64-'66 Chevy Truck Parts?

Would you happen to have the left and right outside mirror arms for 1966 C10?


Thanks,Jimmy
arisaka is offline  
Old 02-14-2008, 02:34 AM   #10
UltraRick
Registered User
 
UltraRick's Avatar
 
Join Date: Aug 2005
Location: Sunny Georgetown, Indiana
Posts: 20
Re: Do you need '64-'66 Chevy Truck Parts?

Could you let me know the cost of a drivers door to 40258?
Thanks, Rick
UltraRick is offline  
Old 02-14-2008, 02:38 AM   #11
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

arisaka:

Thanks for your interest. Do you need the painted or chrome finish and what style mirror?

UltraRick:

Do you need a driver side door shell or a complete door with inners, glass, vent, door panel, hinges and handles?
LILRED66 is offline  
Old 02-14-2008, 03:30 AM   #12
arisaka
Registered User
 
Join Date: May 2007
Location: New Bern,NC
Posts: 2
Re: Do you need '64-'66 Chevy Truck Parts?

Painted will be fine,rectangular mirror,zipcode for shipping 28560.

Thanks,Jimmy
arisaka is offline  
Old 02-14-2008, 03:50 AM   #13
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

ariska:

Thanks for the prompt reply. I will PM you with information.
LILRED66 is offline  
Old 02-14-2008, 09:02 AM   #14
BIGPIMP
PIMPING RIDES
 
BIGPIMP's Avatar
 
Join Date: Sep 2004
Location: SPRING,TEXAS
Posts: 296
Re: Do you need '64-'66 Chevy Truck Parts?

tony i need a 64-66 cab in decent shape my email ashgate20910@aol.com could you send pics please .i know you won't ship ,i'm in texas .
__________________
1964 CHEVY 1/2 C/10 FLEET
1981 CHEVY 1/2 C/10 FLEET
1995 DODGE 1500 V6 FLEET

EAST




http://www.flickr.com/photos/bigasspimp/?saved=1
BIGPIMP is offline  
Old 02-14-2008, 07:48 PM   #15
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

BIGPIMP:

Thanks for your inquiry. I have two good, used cabs. One is a small back window, low hump and one is a big back window, low hump. Both were acquired for my projects, so they are in good, used condition. Let me know if you are interested and I can provide prices, picked up at my shop in Kansas City, KS. Attached are photos of the big window cab.

Thanks for your interest and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.
Attached Images
     

Last edited by LILRED66; 02-14-2008 at 07:54 PM.
LILRED66 is offline  
Old 02-15-2008, 10:39 AM   #16
ron19
Registered User
 
Join Date: Jan 2007
Location: Indiana
Posts: 107
Re: Do you need '64-'66 Chevy Truck Parts?

Hey LILRED,

Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts.

Let me know,
__________________
65' Chevy C10, Short Step
75' Chevy Big10 1/2, 1 time pull truck, now parts truck
02' GMC 2500HD 8.1L 4X4
ron19 is offline  
Old 02-15-2008, 11:49 AM   #17
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Do you need '64-'66 Chevy Truck Parts?

hey red, i need a fleet tail light harness. thanks
joe231 is offline  
Old 02-15-2008, 11:53 AM   #18
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Do you need '64-'66 Chevy Truck Parts?

oh and a chevy headlight harness, thanks
joe231 is offline  
Old 02-17-2008, 11:17 AM   #19
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Do you need '64-'66 Chevy Truck Parts?

Do you have any?
joe231 is offline  
Old 02-17-2008, 05:18 PM   #20
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

joe231:

Thanks for the inquiry. I have a headlight harness and a rear tail light harness for a fleetside. I am doing the World of Wheels show in Kansas City Friday through Sunday, so I have not been doing truck parts stuff, in preparation for the show. I will be back in the saddle on Monday, so I can check my inventory.

Thanks for your interest and patience. I will get back with you regarding these harnesses and thanks for your interest.
LILRED66 is offline  
Old 02-17-2008, 09:34 PM   #21
ron19
Registered User
 
Join Date: Jan 2007
Location: Indiana
Posts: 107
Re: Do you need '64-'66 Chevy Truck Parts?

Quote:
Originally Posted by ron19 View Post
Hey LILRED,

Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts.

Let me know,
Hey LILRED, do you think you have this?
__________________
65' Chevy C10, Short Step
75' Chevy Big10 1/2, 1 time pull truck, now parts truck
02' GMC 2500HD 8.1L 4X4
ron19 is offline  
Old 02-17-2008, 11:30 PM   #22
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Do you need '64-'66 Chevy Truck Parts?

Ok, thanks Tony!
Is your inventory used stuff, or nos stuff too?
Joe
__________________
CHEVY ONLY
joe231 is offline  
Old 02-18-2008, 10:21 AM   #23
LILRED66
Account Suspended
 
LILRED66's Avatar
 
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
Re: Do you need '64-'66 Chevy Truck Parts?

joe231:

All of my parts are good, used OEM parts. I do not sell reproduction or aftermarket stuff. I have acquired a great deal of inventory over the past several years and use the majority of my parts for my projects, however, I do sell a lot of used stuff, also.
LILRED66 is offline  
Old 02-18-2008, 10:32 AM   #24
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Do you need '64-'66 Chevy Truck Parts?

cool, thanks Tony!
look forward to hearing from you.
__________________
CHEVY ONLY
joe231 is offline  
Old 02-18-2008, 01:34 PM   #25
gulfcoast66
64-66 CHEVY JUNKIE
 
gulfcoast66's Avatar
 
Join Date: Apr 2007
Location: Cypress ,Texas
Posts: 1,516
Red face Re: Do you need '64-'66 Chevy Truck Parts?

Hey tony hows it going man im in a bind i hope you can help. I need to buy some nuts and bolts from you i need the ones for the hand brake and steering colouem and the 3 on the firewall for the colouem the 4 little ones for the plate under the dash for the colouem. I removed my steering colouem and hand brake and lost all the hardware somewhere between work and home. I hope you know what im talking about. Thanks Chris
__________________
1966 C-10 Fleetside LWB, 350 Lt1 4l60-E
2008 Silverado Crew Cab, 4.8 4l60-E
1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E
2017 GMC Serra 4x4 5.3 Vortec, 4l60-E
Do It In A Chevrolet
gulfcoast66 is offline  
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com