The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-28-2013, 12:47 AM   #1
SilverMiner
Registered User
 
SilverMiner's Avatar
 
Join Date: Oct 2005
Location: North Idaho
Posts: 335
94 Fan Blower upgrade w/part #

Okay, after reading the recent thread about "better AC in 20 minutes" I finally ordered a new fan blower from a '94 Chevy Pickup for my 1980 Silverado Suburban with A/C. I purchased the new fan from NAPA and the part number I bought was 655-1744. Please let me know if anyone disagrees with this selection or if you know of a better one.

Being an engineer, I made some actual before and after measurements using a Kestrel 4000 anemometer. Prior to installing the new blower, I measured approx. 1200 fpm (feet per minute) of airflow coming from the center vent with the fan set on it's highest level and the A/C set to "MAX". I say approximately because the value did vary by as much as 35 fpm as I was holding the instrument. The attached picture shows an actual reading, including the temperature of the air blowing from the vent.

After replacing my old blower, which I am absolutely certain was the original blower from 1980, I did measure higher flows coming from the center vent on the order of ~1350 fpm which represents a 12% increase in volume. There was no measurable difference in temperature however.

If I had not measured the difference, I am not certain I would have been able to physically detect any change, which makes me suspect perhaps I didn't buy the correct new blower. But given the low cost and ease of changing the blowers, I still think it was well worth the time and money for even a 10% increase. From what I've read after searching older threads, many others have reported a much greater change after making the swap. I think one explanation is that undoubtedly the blower in some folk's trucks have aged worse than others.

Overall, I'd heartily recommend making the swap. Even if you don't detect a great change, it is probably there and working to your benefit.
Attached Images
 
SilverMiner is offline   Reply With Quote
Old 08-28-2013, 10:01 AM   #2
anubisani
Registered User
 
anubisani's Avatar
 
Join Date: Apr 2013
Location: homestead florida
Posts: 312
Re: 94 Fan Blower upgrade w/part #

I thought u had to get from 96 and up blower
anubisani is offline   Reply With Quote
Old 08-28-2013, 10:30 AM   #3
Cherub
Registered User
 
Cherub's Avatar
 
Join Date: Feb 2008
Location: Houston
Posts: 970
Re: 94 Fan Blower upgrade w/part #

Ive always seen this upgrade. nice to have some numbers to benchmark with.
Cherub is offline   Reply With Quote
Old 08-28-2013, 11:20 AM   #4
bnoon
Registered User
 
Join Date: Jul 2012
Location: Des Moines IA
Posts: 1,250
Re: 94 Fan Blower upgrade w/part #

This thread shows "PM129" as the part number, but they also referenced a '94 Chevy as well, so perhaps a part number cross reference? http://67-72chevytrucks.com/vboard/s....php?p=4742848
__________________
- 1981 Sierra 454, NV4500 swap
- 2006 Z06, 25k miles
- 1973 Nova - Project CarNova Virus on Youtube
bnoon is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com