TN Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**A1971Blazer** · 11-12-2018, 08:58 AM

I have made another batch of billet aluminum transfer case boot rings.....for the 69-72 K/5 Blazers...Jimmy.....and 4wd trucks with the NP205 TC

There are two versions:
One with an approximation of the K/5 logo......and one without

These are ¼" thick 6061 aluminum plate that has been CNC machined, black anodized and CNC engraved with the NP205 shift pattern...... not painted on

They are blank as of now and I will consider other engraving options for an additional charge, and limited to what I can fit on the space available.

The supply is limited...I made 40 pieces and 16 pieces already sold on other sites...they are going fast

PM if you would like to order one...price each includes: the ring, 4 black screws, 4 U-nuts, and shipping to lower 48

Paypal preferred, but I will accept other forms of payment including credit card

Edit 10/17/23: Unfortunately due to current economic policies that have led to runaway inflation,
I have had to raise the the price of these to cover the increased cost of producing and shipping them.
the new price is $79.00 each and still includes the fasteners and shipping.
Name: IMG_0030r.jpg
Views: 3603
Size: 30.7 KB

Name: IMG_0030r.jpg
Views: 3603
Size: 30.7 KB

Name: IMG_1467b.jpg
Views: 3142
Size: 68.0 KB

**A1971Blazer** · 11-15-2018, 08:30 AM

I've sold 24 of these already...
still have several available...
thanks to all who bought one!

**Mr Banshee** · 11-15-2018, 01:20 PM

I would like one, Thx Mike

**A1971Blazer** · 11-15-2018, 01:33 PM

Quote:

Originally Posted by Mr Banshee

I would like one, Thx Mike

Mike...PM me for ordering info

**A1971Blazer** · 11-15-2018, 03:24 PM

Fellow member in GA...received his today...
sent me this picture
Name: TCring.jpg
Views: 3063
Size: 63.0 KB

**A1971Blazer** · 11-15-2018, 06:38 PM

Quote:

Originally Posted by Mr Banshee

I would like one, Thx Mike

One sold to Mr Banshee....thanks!

**Mr Banshee** · 11-17-2018, 07:39 PM

Recieved the Boot Retainer today, very nice piece! Thanks A1971Blazer!!

**A1971Blazer** · 11-18-2018, 07:17 PM

Quote:

Originally Posted by Mr Banshee

Recieved the Boot Retainer today, very nice piece! Thanks A1971Blazer!!

Thanks...post a pic when you get it installed...

**blownz** · 11-23-2018, 09:56 AM

Whitton, I received mine this week, It will be put under the Christmas Tree!
Thanks!

**A1971Blazer** · 12-21-2018, 12:35 PM

I have several more of these K/5 transfer case boot rings in black anodized...

I now have a GMC version available

I also have a few matching 4 speed boot rings...

Price is $58.00 each and includes matching black screws, U-nuts, and shipping

With K/5 Logo
Name: IMG_0064.jpg
Views: 2873
Size: 22.5 KB

Name: IMG_0064.jpg
Views: 2873
Size: 22.5 KB

matching 4 speed boot ring
Name: IMG_0066.jpg
Views: 2851
Size: 30.2 KB

GMC truck or Jimmy
Name: IMG_0071.jpg
Views: 2929
Size: 28.9 KB

Shown on high hump with 4 speed before anodizing
The bare aluminum are available as well (but out of stock right now)
Name: IMG_0025 (1).jpg
Views: 2998
Size: 47.6 KB

Name: IMG_0025 (1).jpg
Views: 2998
Size: 47.6 KB

Shown on high hump with black carpet
Name: IMG_0081.jpg
Views: 2825
Size: 106.0 KB

extd56 · 12-24-2018, 01:21 AM

you have one of the gmc versions in a polished version

CG · 12-26-2018, 10:16 AM

Any chance you have a set of these without the extra piece hanging off? No shift info area, rings only.

**A1971Blazer** · 12-26-2018, 10:26 AM

Quote:

Originally Posted by extd56

you have one of the gmc versions in a polished version

I don't have any bare ones on hand right now..I will be running another batch in the next few weeks

**A1971Blazer** · 12-26-2018, 10:28 AM

Quote:

Originally Posted by CG

Any chance you have a set of these without the extra piece hanging off? No shift info area, rings only.

I don't have any right now but I've had several requests for that style..I will be running another batch in the next few weeks and I could run a few without the shift pattern side on them...keep an eye on this thread and I'll post when they're in process...thanks

CG · 12-31-2018, 08:07 PM

Yes I would be interested for sure on a set of the two oval rings without the kewl extras .. Thanks.

doo142 · 01-08-2019, 09:44 AM

Side note: early blazers had the shift pattern with the ring , nothing on the knob. Later 71-72 had just a ring for the boot and pattern on knob. These are very nice pieces!!

**A1971Blazer** · 01-08-2019, 10:14 AM

Quote:

Originally Posted by doo142

Side note: early blazers had the shift pattern with the ring , nothing on the knob. Later 71-72 had just a ring for the boot and pattern on knob. These are very nice pieces!!

Interesting info....I've never seen a factory ring with the shift pattern on it, but I know some had a sticker on the glove box lid that showed the procedure for using the 4WD....thanks for the kind words.

Husker · 01-08-2019, 11:34 PM

I will take one with GMC.
Thanks
Ron

**A1971Blazer** · 01-09-2019, 08:28 AM

Quote:

Originally Posted by Husker

I will take one with GMC.
Thanks
Ron

with "Jimmy" or without?
Name: IMG_0071.jpg
Views: 2597
Size: 28.9 KB

Husker · 01-09-2019, 10:44 AM

With thanks.
Ron

**gmc 2500 4x4** · 01-09-2019, 06:52 PM

very nice work A1971Blazer !!! im trying to figure something for my 69 gmc, has the t-221. best i can have done is an engraved pattern on the knob

doo142 · 01-09-2019, 09:36 PM

Quote:

Originally Posted by A1971Blazer

Interesting info....I've never seen a factory ring with the shift pattern on it, but I know some had a sticker on the glove box lid that showed the procedure for using the 4WD....thanks for the kind words.

Here is a pic of a 1970 with the Dana transfer case

**A1971Blazer** · 01-10-2019, 08:10 AM

Quote:

Originally Posted by doo142

Here is a pic of a 1970 with the Dana transfer case

OK... yea...I forgot that some had the Dana TC..I've never seen the boot ring for one except in pictures

**A1971Blazer** · 01-10-2019, 08:24 AM

Quote:

Originally Posted by Husker

With thanks.
Ron

Ron....yours will ship today....thanks!

Toro · 02-11-2019, 06:30 PM

Do you have any more of the one's without the K/5 logo?

thanks!

11-12-2018, 08:58 AM	#1
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,185	Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized I have made another batch of billet aluminum transfer case boot rings.....for the 69-72 K/5 Blazers...Jimmy.....and 4wd trucks with the NP205 TC There are two versions: One with an approximation of the K/5 logo......and one without These are ¼" thick 6061 aluminum plate that has been CNC machined, black anodized and CNC engraved with the NP205 shift pattern...... not painted on They are blank as of now and I will consider other engraving options for an additional charge, and limited to what I can fit on the space available. The supply is limited...I made 40 pieces and 16 pieces already sold on other sites...they are going fast PM if you would like to order one...price each includes: the ring, 4 black screws, 4 U-nuts, and shipping to lower 48 Paypal preferred, but I will accept other forms of payment including credit card Edit 10/17/23: Unfortunately due to current economic policies that have led to runaway inflation, I have had to raise the the price of these to cover the increased cost of producing and shipping them. the new price is $79.00 each and still includes the fasteners and shipping. __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer ............. Last edited by A1971Blazer; 10-17-2023 at 07:17 AM.

11-15-2018, 08:30 AM	#2
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,185	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized I've sold 24 of these already... still have several available... thanks to all who bought one! __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

11-15-2018, 01:20 PM	#3
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized I would like one, Thx Mike

11-15-2018, 03:24 PM	#5
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,185	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Fellow member in GA...received his today... sent me this picture __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

11-17-2018, 07:39 PM	#7
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Recieved the Boot Retainer today, very nice piece! Thanks A1971Blazer!!

11-23-2018, 09:56 AM	#9
blownz Active Member Join Date: Mar 2005 Location: Annapolis, MD Posts: 183	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Whitton, I received mine this week, It will be put under the Christmas Tree! Thanks!

12-21-2018, 12:35 PM	#10
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,185	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized I have several more of these K/5 transfer case boot rings in black anodized... I now have a GMC version available I also have a few matching 4 speed boot rings... Price is $58.00 each and includes matching black screws, U-nuts, and shipping With K/5 Logo matching 4 speed boot ring GMC truck or Jimmy Shown on high hump with 4 speed before anodizing The bare aluminum are available as well (but out of stock right now) Shown on high hump with black carpet __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer ............. Last edited by A1971Blazer; 12-21-2018 at 12:40 PM.

12-24-2018, 01:21 AM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized you have one of the gmc versions in a polished version

12-26-2018, 10:16 AM	#12
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,989	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Any chance you have a set of these without the extra piece hanging off? No shift info area, rings only.

12-31-2018, 08:07 PM	#15
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,989	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Yes I would be interested for sure on a set of the two oval rings without the kewl extras .. Thanks.

01-08-2019, 09:44 AM	#16
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Side note: early blazers had the shift pattern with the ring , nothing on the knob. Later 71-72 had just a ring for the boot and pattern on knob. These are very nice pieces!! __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

01-08-2019, 11:34 PM	#18
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized I will take one with GMC. Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

01-09-2019, 10:44 AM	#20
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized With thanks. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

01-09-2019, 06:52 PM	#21
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized very nice work A1971Blazer !!! im trying to figure something for my 69 gmc, has the t-221. best i can have done is an engraved pattern on the knob

02-11-2019, 06:30 PM	#25
Toro Registered User Join Date: Nov 2018 Location: Huntsville, AL Posts: 338	Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized Do you have any more of the one's without the K/5 logo? thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.