GEN III EFI/Fuel Tank Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

azsmokey · 11-05-2008, 09:18 PM

To all of you who have installed fuel injection into your 67-72, what type of tank setup are you using? I have seen a number of different variants from CPP, ECE, etc... What else is out there? I do not really want to spend a lot of $ on the tank alone. Rick's Hot Rod Shop quoted over $1000.00 for just the tank! Lets see pics... Any ideas?

killer71 · 11-05-2008, 09:21 PM

contact boardmember "fuelcellguy" and he can help ya out. i have actually used him on 2 difft. occasions and he's a gr8 guy to deal with.
http://67-72chevytrucks.com/vboard/s...d.php?t=244448

boostat4500 · 11-05-2008, 11:07 PM

I am using my stock tank with an in-tank pump. Mounted the regulator just outside the tank and ran 1 fuel line up to the motor. Inexpensive and easy!

killer71 · 11-05-2008, 11:47 PM

nice job boostat 4500, that would save him a ton of money!

jorgensensc · 11-06-2008, 12:08 AM

What do you do about low fuel starving the engine on corners?

RamAirZ · 11-06-2008, 01:08 AM

Keep it full of gas

And don't autocross it lol

Ackattack · 11-06-2008, 01:30 AM

Stock 00 Trans Am fuel tank.....got it with the fuel pump for $50

vtblazer · 11-06-2008, 06:39 AM

I 2nd using FuelCellGuy, he made me a custom fit for my blazer and did an excellent job.

Baffles, in-tank pump...etc.

meathead95 · 11-25-2008, 11:22 PM

anyone have fuelcellguys contact info?

danman987123 · 11-26-2008, 01:34 AM

i do like ackattacks. stock. cheap. gets job done and its from a t/a and the t/a had an ls1 so they were ment to work together pretty much. i got mine from no limit hot rod. i think i paid 450 for the aluminum tank and like another 2 for the fuel injection system inside. comes with pump, line, and everything just ready to connect. does come with all hardware and everything to just bolt right up. nice fit too and all aluminum looks nice... can someone show me how to upload pictures. it says mine are to large

lofly'a · 11-26-2008, 06:17 AM

i've saved all the info on ackattack's camaro tank install and fender widening, and plan to use both on my build. this is great and economical information for the DIYers like most of us. i don't like to farm anything out if i can help it. great stuff "Ack".

**JMac11** · 11-26-2008, 08:26 AM

Best place to get the bolt in seding units????

jkaylor68gmc · 11-26-2008, 09:27 AM

Call Tanks and get their universal poly truck tank. It fits between the rear rails and you just have to slide the that last crossmember back. The tank is only $215 and the LS pump is another $215.

So that is $430 for everything! Tell John, Josh at Buckaroo sent you.

tinlid · 11-26-2008, 10:43 AM

All those problems of retro fitting in another tank or building one with baffling and in tank pump are not a problem if you go with a mechanical pump.
See: http://www.racepumps.com/
While a little pricey it sure solves a whole lot of problems.

11-05-2008, 09:18 PM	#1
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	GEN III EFI/Fuel Tank Questions To all of you who have installed fuel injection into your 67-72, what type of tank setup are you using? I have seen a number of different variants from CPP, ECE, etc... What else is out there? I do not really want to spend a lot of $ on the tank alone. Rick's Hot Rod Shop quoted over $1000.00 for just the tank! Lets see pics... Any ideas?

11-05-2008, 09:21 PM	#2
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: GEN III EFI/Fuel Tank Questions contact boardmember "fuelcellguy" and he can help ya out. i have actually used him on 2 difft. occasions and he's a gr8 guy to deal with. http://67-72chevytrucks.com/vboard/s...d.php?t=244448 __________________ R.I.P. Killer 71 10/26/07

11-05-2008, 11:07 PM	#3
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: GEN III EFI/Fuel Tank Questions I am using my stock tank with an in-tank pump. Mounted the regulator just outside the tank and ran 1 fuel line up to the motor. Inexpensive and easy! Attached Images __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

11-05-2008, 11:47 PM	#4
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: GEN III EFI/Fuel Tank Questions nice job boostat 4500, that would save him a ton of money! __________________ R.I.P. Killer 71 10/26/07

11-06-2008, 12:08 AM	#5
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: GEN III EFI/Fuel Tank Questions What do you do about low fuel starving the engine on corners? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-06-2008, 01:08 AM	#6
RamAirZ Registered User Join Date: Mar 2008 Location: Buffalo, MN Posts: 149	Re: GEN III EFI/Fuel Tank Questions Keep it full of gas And don't autocross it lol __________________ 1967 Chevy K10- 4WD project in the works -sold 1985 Suburban- 1/2 ton w/ 3/4 ton gear, 350/700R4 33's and big! 1987 Iroc- LS1/T56 conversion- sold Last edited by RamAirZ; 11-06-2008 at 01:08 AM.

11-06-2008, 01:30 AM	#7
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: GEN III EFI/Fuel Tank Questions Stock 00 Trans Am fuel tank.....got it with the fuel pump for $50 __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

11-06-2008, 06:39 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: GEN III EFI/Fuel Tank Questions I 2nd using FuelCellGuy, he made me a custom fit for my blazer and did an excellent job. Baffles, in-tank pump...etc. Attached Images

11-25-2008, 11:22 PM	#9
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: GEN III EFI/Fuel Tank Questions anyone have fuelcellguys contact info? __________________ 72 2wd blazer 72 swb 4x4

11-26-2008, 01:34 AM	#10
danman987123 Registered User Join Date: Apr 2008 Location: texas Posts: 127	Re: GEN III EFI/Fuel Tank Questions i do like ackattacks. stock. cheap. gets job done and its from a t/a and the t/a had an ls1 so they were ment to work together pretty much. i got mine from no limit hot rod. i think i paid 450 for the aluminum tank and like another 2 for the fuel injection system inside. comes with pump, line, and everything just ready to connect. does come with all hardware and everything to just bolt right up. nice fit too and all aluminum looks nice... can someone show me how to upload pictures. it says mine are to large

11-26-2008, 06:17 AM	#11
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: GEN III EFI/Fuel Tank Questions i've saved all the info on ackattack's camaro tank install and fender widening, and plan to use both on my build. this is great and economical information for the DIYers like most of us. i don't like to farm anything out if i can help it. great stuff "Ack". __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project Last edited by lofly'a; 11-26-2008 at 06:50 AM.

11-26-2008, 08:26 AM	#12
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: GEN III EFI/Fuel Tank Questions Best place to get the bolt in seding units????

11-26-2008, 09:27 AM	#13
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: GEN III EFI/Fuel Tank Questions Call Tanks and get their universal poly truck tank. It fits between the rear rails and you just have to slide the that last crossmember back. The tank is only $215 and the LS pump is another $215. So that is $430 for everything! Tell John, Josh at Buckaroo sent you. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

11-26-2008, 10:43 AM	#14
tinlid Registered User Join Date: Nov 2008 Location: Englewood, CO Posts: 95	Re: GEN III EFI/Fuel Tank Questions All those problems of retro fitting in another tank or building one with baffling and in tank pump are not a problem if you go with a mechanical pump. See: http://www.racepumps.com/ While a little pricey it sure solves a whole lot of problems.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.