![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Señor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
71-72 front rotor hub dimensions
Anyone got a caliper handy and a wheel off their 71+ disc brake setup? I'm looking for the dimensions for the snout (including dust cap) to ensure a wheel with a center bore of 3.07" and hub depth of 2.75" will fit.
__________________
|
![]() |
![]() |
![]() |
#2 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 71-72 front rotor hub dimensions
Hey ken if i caers I LL GET THE MEASUREMENT FOR YA..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#3 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 71-72 front rotor hub dimensions
Ken it looks like my dog ate my calipers or someone walked off with them..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#4 |
Señor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: 71-72 front rotor hub dimensions
No problem on my end. But if your dog ate them, you're going to have problems in a few hours *gulp*
__________________
|
![]() |
![]() |
![]() |
#5 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
|
Re: 71-72 front rotor hub dimensions
I have 3.06 and 1.75. You should be good. In return, I would like to know what kind of wheels you're gonna use.
![]()
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-25-2009 at 10:51 AM. |
![]() |
![]() |
![]() |
#6 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: 71-72 front rotor hub dimensions
XXL,... I measured my blazer rotors. The hub diameter was about 3.030" and the depth was 2.875".
They are ECE cross-drilled 5 lug rotors and with new ECE dust caps. I also measured the bore of a 5 lug ralley. I came up with 3.035". Hope this helps.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 04-25-2009 at 11:04 AM. |
![]() |
![]() |
![]() |
#7 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
|
Re: 71-72 front rotor hub dimensions
Doh! Go with lolife's numbers. I just realized my loose rotors are 1" thick, so the bore would be the same but the snout is shorter- and I didn't include the dust cap...
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
![]() |
![]() |
![]() |
#8 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,699
|
Re: 71-72 front rotor hub dimensions
My rotor are 1-1/4" thick, if that makes a difference.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#9 |
Señor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: 71-72 front rotor hub dimensions
Sounds like a worst case of the dreaded cap doesn't fit syndrome. Or best case, they work fine. I'll let you know on the wheel type once I get them... I need a head start on the crowd
![]()
__________________
|
![]() |
![]() |
![]() |
#10 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
|
Re: 71-72 front rotor hub dimensions
Cap no-fit is easily curable with an angle grinder- with no ill effects to the rotors...
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
![]() |
![]() |
![]() |
#11 |
Señor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: 71-72 front rotor hub dimensions
Current wheels have been capless for 10 years (next month), so as you can see, I am flexible on this point
![]() ![]()
__________________
|
![]() |
![]() |
![]() |
Bookmarks |
|
|