efi fuel tank

[Dayzilla]

looking for a under the bed efi fuel tank for my 1970 c10 swb .. doing a ls1 swap ... any suggestions ?

[lutronjim]

I used one from a GTO and had the filler go through the bumper with a fold down tag.
http://www.tanksinc.com/index.cfm/pa...rod/prd378.htm

[11SECSS]

^^^ any pics of it installed ,looking to poss do the same to my truck.

[hugger6933]

87-01 Blazer tank with a EP381 Delco pump and those are GM type parts and work well in hundreds of documented builds. I do however like the idea of a bumper fill with a fold down plate. Jim

[jessemthompson]

Originally Posted by hugger6933

87-01 Blazer tank with a EP381 Delco pump and those are GM type parts and work well in hundreds of documented builds. I do however like the idea of a bumper fill with a fold down plate. Jim

I'll second the 87-91 blazer fuel tank. I used one in my LS swap

[jessemthompson]

I went with a different filler neck but here was my mock up.

[Skerbs1]

Boyd's makes a great aluminum tank that fits perfect. I just installed one on my 70 swb. It really looks nice!

[Skerbs1]

Here is what it looks like installed.

[Jrainman]

Although I run a carb as of now , when I did my tank relocation I looked for a tank I could use that would provide me the future option of a EFI. as of now I use the extra hole as a vent for my carb set up.

I used a 20 gal 70-73 mustang tank

[lutronjim]

Took pics today and its raining and cold- had to go outside anyway so what the hey.

Truck is daily driver/work. Shows tag closed and closed - tank mounted beneath treated 2x4's for cushion and clearance - driver side were filler was located.

Hope this helps.