What was the hardest part for you to find?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sweet72k5 · 04-09-2005, 12:59 PM

Well mine became the dang gas tank when i bought my truck for 1300 buxs from a lady she had the blazer just painted and alot of work done and then just let it set out in the weather since 1997 and never started it so i had my hands full as far as getting her back to running shape dang tank had a butt load of rust in it so after alot of looking i found one a after market one and as you would know the dang filler neck was diffrent soo i had to take the other one off the old tank and have it put on the new one the only thing that was nice was that the new tank came with a new sinding unit the old tank still had the carban sock in it but caked with rust...lol and after all that was done and a little oil down in the cyclinder walls for a few days and a new set of plugs and the points system taken out and replaced with a hei she fired right up but for me to have to go threw all that it was worth it because i have one nice rig for only 1300 buxs but since then i have dumped thousand into it now...lol

*Gee_Emm* · 04-09-2005, 02:17 PM

This thing took a while for me to find, it is part of the rocker box. Most people have a hard time with the windshield frame but I lucked out on that one x3

LUV2XCLR8 · 04-09-2005, 02:35 PM

FIND ???, HELL I'M STILL LOOKING FOR A SET FOR "GQ"

72 EXTREME BEND TOW HOOKS

I HAVE LOTS OF CASH, NOBODY SEEMS TO BE OFFERING

A BORROWED PIC OF WHAT THEY LOOK LIKE, HINT, HINT, HINT

**special-K** · 04-09-2005, 04:11 PM

Rust-free tub!

vtblazer · 04-09-2005, 06:50 PM

Quote:

Originally Posted by special-K

Rust-free tub!

Got two of those.

For me it's been a single walled top. Still looking...

**pound41** · 04-09-2005, 07:01 PM

Working stock hatch handle with a key

krue · 04-09-2005, 07:14 PM

The time and money to work on mine!

HatGuy · 04-09-2005, 09:30 PM

Working stock hatch handle with a key!
Me too pound 41

jakeslim · 04-09-2005, 09:32 PM

Quote:

Originally Posted by pound41

Working stock hatch handle with a key

got that one NOS(for my use

)

Need a small part for the internals of the hatch though....not sure where to go for that.

LUV2XCLR8 · 04-09-2005, 09:48 PM

Quote:

Originally Posted by jakeslim

Need a small part for the internals of the hatch though....not sure where to go for that.

WHICH PART, I MAY HAVE IT

**FRENCHBLUE72** · 04-09-2005, 11:36 PM

I need time.... PLENTY of parts just no damn time to put any of em on..

Sweet72k5 · 04-10-2005, 12:29 AM

i have a handle with the key!!!An might get some of the hooks have to check with a buddy of mine...The handle needs to be re chrome but works good..I have a friend that scraps all kind of old cars and trucks..

Sweet72k5 · 04-10-2005, 12:32 AM

find all kinds of stuff out in old farmers fields..One time we where clearing out some bushes out in this farmers field the guy past away and there was a 1949 merc two door in the bushes body was in very nice shape...

71jimmy · 04-10-2005, 01:56 AM

I can't find front seats close enough to make it worth while.

**pound41** · 04-10-2005, 07:50 AM

what do you want for the hatch handle

**pound41** · 04-10-2005, 07:53 AM

Sweet72K5
you have a PM

LUV2XCLR8 · 04-10-2005, 08:06 AM

Quote:

Originally Posted by Sweet72k5

An might get some of the hooks have to check with a buddy of mine...

COULD MEAN ALOT OF $$$ FOR YA IF YA GOT THEM

crispy · 04-10-2005, 11:02 AM

i'm in the same boat as Krue... i don't have the time or money right now to get going on the K5... as soon as i sell my Dodge, i should have a little more of both though.

3 on the tree · 04-10-2005, 12:37 PM

a good stock steering wheel for my 70 K5. Can find repros at LMC, but wayyyyy too pricey.

**jamie72** · 04-10-2005, 01:37 PM

a good hatch stop or the chrome single wall hold daown strips...

teamharvey · 04-10-2005, 08:03 PM

At the moment it is the temp. sending unit wire. I have been very lucky meeting great people on here that have helped me get everything needed so far.

Bret

Sweet72k5 · 04-10-2005, 08:55 PM

yeah i have to get a new glove boxs my blazer didnt have one open it up and went wow no box....lol

jakeslim · 04-10-2005, 09:28 PM

LUV2XCLR8 - this is the part I need. Pm me the info on it.

**pound41** · 04-10-2005, 09:42 PM

Teamharvey:
Is it the wire or just the wire end? Usually its the end that goes bad. You can take the old end apart and mount it to a new wire/or old one again. Also I have taken just a standard plastic coated female wire end cut a little channel on the backside and slide it on

Paul72 · 04-10-2005, 09:59 PM

Quote:

Originally posted by vtblazer
For me it's been a single walled top. Still looking...

Got one of those, need a tub!

04-09-2005, 12:59 PM	#1
Sweet72k5 Registered User Join Date: Apr 2005 Location: Oregon Posts: 53	What was the hardest part for you to find?? Well mine became the dang gas tank when i bought my truck for 1300 buxs from a lady she had the blazer just painted and alot of work done and then just let it set out in the weather since 1997 and never started it so i had my hands full as far as getting her back to running shape dang tank had a butt load of rust in it so after alot of looking i found one a after market one and as you would know the dang filler neck was diffrent soo i had to take the other one off the old tank and have it put on the new one the only thing that was nice was that the new tank came with a new sinding unit the old tank still had the carban sock in it but caked with rust...lol and after all that was done and a little oil down in the cyclinder walls for a few days and a new set of plugs and the points system taken out and replaced with a hei she fired right up but for me to have to go threw all that it was worth it because i have one nice rig for only 1300 buxs but since then i have dumped thousand into it now...lol

04-09-2005, 02:35 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	FIND ???, HELL I'M STILL LOOKING FOR A SET FOR "GQ" *72 EXTREME BEND TOW HOOKS* I HAVE LOTS OF CASH, NOBODY SEEMS TO BE OFFERING A BORROWED PIC OF WHAT THEY LOOK LIKE, HINT, HINT, HINT Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 04-09-2005 at 08:02 PM.

04-09-2005, 04:11 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Rust-free tub! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-09-2005, 07:14 PM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	The time and money to work on mine! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-09-2005, 09:30 PM	#8
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	Working stock hatch handle with a key! Me too pound 41 __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html Last edited by HatGuy; 04-09-2005 at 09:31 PM.

04-09-2005, 02:17 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	This thing took a while for me to find, it is part of the rocker box. Most people have a hard time with the windshield frame but I lucked out on that one x3

04-09-2005, 07:01 PM	#6
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Working stock hatch handle with a key

04-09-2005, 11:36 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	I need time.... PLENTY of parts just no damn time to put any of em on.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-10-2005, 12:29 AM	#12
Sweet72k5 Registered User Join Date: Apr 2005 Location: Oregon Posts: 53	i have a handle with the key!!!An might get some of the hooks have to check with a buddy of mine...The handle needs to be re chrome but works good..I have a friend that scraps all kind of old cars and trucks..

04-10-2005, 12:32 AM	#13
Sweet72k5 Registered User Join Date: Apr 2005 Location: Oregon Posts: 53	find all kinds of stuff out in old farmers fields..One time we where clearing out some bushes out in this farmers field the guy past away and there was a 1949 merc two door in the bushes body was in very nice shape...

04-10-2005, 01:56 AM	#14
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	I can't find front seats close enough to make it worth while. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-10-2005, 07:50 AM	#15
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	what do you want for the hatch handle

04-10-2005, 07:53 AM	#16
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Sweet72K5 you have a PM

04-10-2005, 11:02 AM	#18
crispy '71 Chevy Blazer Join Date: Jan 2005 Location: San Leandro, CA (near Oakland) Posts: 96	i'm in the same boat as Krue... i don't have the time or money right now to get going on the K5... as soon as i sell my Dodge, i should have a little more of both though. __________________ '71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining"

04-10-2005, 12:37 PM	#19
3 on the tree Registered User Join Date: Oct 2004 Posts: 393	a good stock steering wheel for my 70 K5. Can find repros at LMC, but wayyyyy too pricey.



Register or Log In To remove these advertisements.

04-10-2005, 01:37 PM	#20
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	a good hatch stop or the chrome single wall hold daown strips... __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-10-2005, 08:03 PM	#21
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	At the moment it is the temp. sending unit wire. I have been very lucky meeting great people on here that have helped me get everything needed so far. Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

04-10-2005, 08:55 PM	#22
Sweet72k5 Registered User Join Date: Apr 2005 Location: Oregon Posts: 53	yeah i have to get a new glove boxs my blazer didnt have one open it up and went wow no box....lol

04-10-2005, 09:28 PM	#23
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	LUV2XCLR8 - this is the part I need. Pm me the info on it. __________________ 69 K5 CST stock- 350, 4speed 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's,

04-10-2005, 09:42 PM	#24
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	Teamharvey: Is it the wire or just the wire end? Usually its the end that goes bad. You can take the old end apart and mount it to a new wire/or old one again. Also I have taken just a standard plastic coated female wire end cut a little channel on the backside and slide it on

Register or Log In To remove these advertisements.