FL autometer,air ride tech,weld,arp,etc..

[mac72]

new in box part#4486 autometer ultralight 3&3/8 programmable speedo.190.00
new in box part# 6604 ultralight tach matchs speedo w/ remote recall knob.190.00
info. http://www.autometer.com/cat_gaugede...id=3117&sid=11
http://www.autometer.com/cat_gaugede...id=3318&sid=11
http://www.autometer.com/cat_gaugede...id=3153&sid=11
the info. says the tach is 3&3/4 but its the same size as the speedo visually. just the mounting hole is slightly larger, or you can pedastal mount it as intended.
new in box part#4402 ultralight blower press. guage 50.00 2 &1/16 guages in pic are already sold

air ride technologies musclebar new but no box this fits 63 to 87 trucks 300.00SOLD
http://www.ridetech.com/shop/suspens...musclebar.html
forgot to add this-new Universal 4link w/ chromoly tubing grade 8 bolts lock nuts,tube inserts & all rod ends etc.. 200.00

weld racing drag lights 15x8,15x12/5x5 the offset on the rears fit w/ the stock axle with no inner bed side work but you have to widen the wheel tubs if you run 31x15.50's. this is a nice way to get alot of meat on the road w/ minimal cost. 400.00

new air ride technologies ride pro e controller. this setup uses air press to monitor bag height.Its a 4 corner leveling system w/ optional remotes.The part#arc4700e,rem6500 comes w/ everything elec. no solenoid block,compressor,tank etc..400.00 SOLD

new suicide doors lower 4 bar mounts . these are the axle end mounts for the lower bar & shock.http://www.*****************/4-link-k...er-lift-system
might work for someone doing a custom 4link. link joint spread-2.5",3" axle tube,9/16 bolt hole,1/4" thk. these are sprayed w/ "dp sealer" 30.00

rebuilt & powder coated black hood hinges. one pivot has a bolt instead of a rivet but their pretty nice 100.00

new in package arp stainless 6 point 3/8 x .750 header bolts part#400-1102
15.00 SOLD

fairly new one piece driveshaft.short bed big block,400 turbo short shaft .length from joint center 56.5", 1310 joints. the slip yoke has had a little material taken off the end. will take pics if necc.100.00

new 16" spal fanelec. .http://www.jegs.com/webapp/wcs/store...-1&showValue=3
can take actual pics if necc.75.00

front crossmember & control arms w/ air bags. Has been sand blasted & painted base coat,clear coat ppg fine silver.All shafts rebuilt.Will post pics mon. NO SHIPPING 150.00
will get the other pics posted mon. eve. all prices are + shipping. post for a quote.PayPal,money order,cashiers chk.items will be sent right after payment clears.first one to post "I will take said item" is first .second etc...