|
09-10-2005, 06:33 AM
|
#1 |
|
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Door Adjustment
The 72 pass door has to be pushed down a little to close correctly and requires some "slamming" effort. The top of the latch on the door is hitting the striker plate on the cab. See the picture.
How do I adjust this. Easily... Last edited by crustysarge; 09-10-2005 at 06:34 AM. |
|
|
|
09-10-2005, 07:30 AM
|
#2 |
|
Registered User
Join Date: Aug 2005
Location: mount airy n.c.
Posts: 243
|
i had same problem changed hinges played around with it going from upper to lower door to cab finally got back hope this helps
|
|
|
|
|
09-10-2005, 08:06 AM
|
#3 |
|
Registered User
Join Date: Jul 2004
Location: Shakopee Minnesota
Posts: 174
|
Adjust the striker plate on the cab. Raise the striker plate by loosening the 4 bolts and move it up. I would only loosen the bolts slightly and tap the striker plate upwards with a hammer. The striker plate can move many directions and they can be a real pain in the ... so only adjust it slightly or your problem can get worse. If your not comfortable doing this bring it to a body shop. They can adjust it in minutes.
|
|
|
|
|
09-12-2005, 02:15 PM
|
#4 |
|
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Thanks lowrider, that did the trick with min headache, took 10 minutes including the wrench getting time. Closes like new now.
|
|
|
|
|
09-12-2005, 06:18 PM
|
#5 |
|
Registered User
Join Date: Jul 2004
Location: Shakopee Minnesota
Posts: 174
|
Cool I'm glad it worked for you.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
