67-72 cab corner 6x9 speaker brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 07-28-2011, 10:37 PM

I was asked by several to make some 67-72 6x9 speaker brackets, much like the ones I make for the 73-87 line. Well, here they are.

Made of heavy 16 ga steel, laser cut and bent, there brackets fit perfectly into the cab corner and allow you to run some larger, better sounding speakers. These will only work on trucks with relocated gas tanks and jack assemblies. Mounting is easy, with only six holes total to drill. If your truck is currently under construction, you can weld in the bottom mounting brackets, thus requiring two holes only while still allowing easy removal of the brackets if desired. Kit consist of L & R speaker brackets, L & R floor mounting brackets, mounting hardware, and detailed instructions. These come bare steel, and will need typical metal prep and paint prior to installation.

Pictures below are of the prototype test bracket, installed in a junk cab I picked up in order to create these. I just submitted an order for 25 pairs (including three sets with NO holes, for those who want to run component speakers), and should have them in 5-10 business days. I will be able to start shipping them out the following day or two. I am only guaranteeing 25 sets at this time, may do more depending on how these do.

If you would like to pre-order, information is as follows.

Price is $75 shipped to your door anywhere in the lower 48 states, extra anywhere else. I prefer PAYPAL for payment, but I will accept money orders, or cash if picked up in person (will be cheaper as there is no shipping). This is $10 more than the 73-87 brackets, due to the larger size of these, increased packaging and shipping, and additional mounting hardware.

PLEASE reply here AND PM me if you are interested, as I am not on the 67-72 side of the board very much.

15 of sets with holes

9 of sets with NO holes

I have sold over 200 73-87 sets, zero complaints. I am confident you will be pleased with these as well.

bigblock73 · 07-28-2011, 10:42 PM

Last of the pictures

**Dieselwrencher** · 07-28-2011, 11:01 PM

Jeff, can you get me a measurement on the farthest point these brackets come out from the door jamb? I'm just trying to see if there is enough room for these with my seats all the way back. Thanks Ryan.

**Ironhorse** · 07-28-2011, 11:12 PM

Jeff, replied to your Truck Audio post. I am most assuredly in for a set with a PM sent.

Pkh66 · 07-28-2011, 11:32 PM

I'll take a set. Pm coming.
Posted via Mobile Device

bigblock73 · 07-28-2011, 11:34 PM

Quote:

Originally Posted by Dieselwrencher

Jeff, can you get me a measurement on the farthest point these brackets come out from the door jamb? I'm just trying to see if there is enough room for these with my seats all the way back. Thanks Ryan.

If you measure straight over from the door jamb to where the inside edge of the bracket sits, it is 4". It doesn't appear to sit out any further than the old gas tank did.

bigblock73 · 07-29-2011, 09:40 AM

18 sets remaining with holes

2 sets remaining with NO holes

68Vernon · 07-29-2011, 01:13 PM

I will take a set. I have sent a PM.

**Already Gone** · 07-29-2011, 01:44 PM

I'll take a set with the holes. I'll send a PM.

*stich626* · 07-29-2011, 06:25 PM

Quote:

Originally Posted by bigblock73

18 sets remaining with holes

2 sets remaining with NO holes

I'll take a set of no hole,
no paypal, is a u.s. postal m/o ok?

and where to send?
thanks
my b/a 6.5.3's are gonna rock in these

bigblock73 · 07-29-2011, 06:47 PM

Quote:

Originally Posted by stich626

I'll take a set of no hole,
no paypal, is a u.s. postal m/o ok?

and where to send?
thanks
my b/a 6.5.3's are gonna rock in these

MO is fine, PM sent.

*stich626* · 07-29-2011, 07:24 PM

got it (pm)

**Dieselwrencher** · 07-29-2011, 07:48 PM

Quote:

Originally Posted by bigblock73

If you measure straight over from the door jamb to where the inside edge of the bracket sits, it is 4". It doesn't appear to sit out any further than the old gas tank did.

I removed my tank and have my seats as far back as I can go. That's why I was curious. Thanks for the measurement. I will check and let you know soon. Ryan.

calvin78612 · 07-29-2011, 08:10 PM

67-72 with no holes please.

**Hart_Rod** · 07-29-2011, 09:44 PM

Cool idea!

rich67 · 07-29-2011, 10:26 PM

nice idea dude.

bigblock73 · 07-29-2011, 10:48 PM

Thanks guys!

VA72C10 · 07-29-2011, 11:52 PM

cool product!

bigblock73 · 07-31-2011, 09:47 AM

Ttt

Last_Paladin · 07-31-2011, 10:14 AM

If you do another run, I'd want a set with no holes, please.

creepdogg · 07-31-2011, 10:51 AM

I too would like a set less holes, pm when and if you make more. Tks

bigblock73 · 07-31-2011, 12:27 PM

Last Paladin and creepdog

If the shop hasn't cut them yet, I will see if I can have them do more with NO holes, and less with them...sound good? I will post back here tomorrow with the update.

creepdogg · 07-31-2011, 01:16 PM

Sounds good
Posted via Mobile Device

Last_Paladin · 07-31-2011, 01:51 PM

Works for me.

streetstrip1972 · 07-31-2011, 08:56 PM

I'll take a set if u still have any with no holes please

thanks bobby

07-28-2011, 10:37 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	67-72 cab corner 6x9 speaker brackets I was asked by several to make some 67-72 6x9 speaker brackets, much like the ones I make for the 73-87 line. Well, here they are. Made of heavy 16 ga steel, laser cut and bent, there brackets fit perfectly into the cab corner and allow you to run some larger, better sounding speakers. These will only work on trucks with relocated gas tanks and jack assemblies. Mounting is easy, with only six holes total to drill. If your truck is currently under construction, you can weld in the bottom mounting brackets, thus requiring two holes only while still allowing easy removal of the brackets if desired. Kit consist of L & R speaker brackets, L & R floor mounting brackets, mounting hardware, and detailed instructions. These come bare steel, and will need typical metal prep and paint prior to installation. Pictures below are of the prototype test bracket, installed in a junk cab I picked up in order to create these. I just submitted an order for 25 pairs (including three sets with NO holes, for those who want to run component speakers), and should have them in 5-10 business days. I will be able to start shipping them out the following day or two. I am only guaranteeing 25 sets at this time, may do more depending on how these do. If you would like to pre-order, information is as follows. Price is $75 shipped to your door anywhere in the lower 48 states, extra anywhere else. I prefer PAYPAL for payment, but I will accept money orders, or cash if picked up in person (will be cheaper as there is no shipping). This is $10 more than the 73-87 brackets, due to the larger size of these, increased packaging and shipping, and additional mounting hardware. PLEASE reply here AND PM me if you are interested, as I am not on the 67-72 side of the board very much. 15 of sets with holes 9 of sets with NO holes I have sold over 200 73-87 sets, zero complaints. I am confident you will be pleased with these as well. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 11-08-2011 at 09:51 PM.

07-28-2011, 10:42 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 67-72 cab corner 6x9 speaker brackets Last of the pictures Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

07-28-2011, 11:01 PM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67-72 cab corner 6x9 speaker brackets Jeff, can you get me a measurement on the farthest point these brackets come out from the door jamb? I'm just trying to see if there is enough room for these with my seats all the way back. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-28-2011, 11:12 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: 67-72 cab corner 6x9 speaker brackets Jeff, replied to your Truck Audio post. I am most assuredly in for a set with a PM sent. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-28-2011, 11:32 PM	#5
Pkh66 Registered User Join Date: Apr 2011 Location: Dallas Posts: 94	Re: 67-72 cab corner 6x9 speaker brackets I'll take a set. Pm coming. Posted via Mobile Device

07-29-2011, 09:40 AM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 67-72 cab corner 6x9 speaker brackets 18 sets remaining with holes 2 sets remaining with NO holes __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 07-29-2011 at 10:46 AM.

07-29-2011, 01:13 PM	#8
68Vernon Registered User Join Date: Nov 2008 Location: Russellville, AR Posts: 4	Re: 67-72 cab corner 6x9 speaker brackets I will take a set. I have sent a PM.

07-29-2011, 01:44 PM	#9
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: 67-72 cab corner 6x9 speaker brackets I'll take a set with the holes. I'll send a PM. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

07-29-2011, 07:24 PM	#12
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: 67-72 cab corner 6x9 speaker brackets got it (pm)

07-29-2011, 08:10 PM	#14
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: 67-72 cab corner 6x9 speaker brackets 67-72 with no holes please. __________________ 84 step side 87 swb

07-29-2011, 09:44 PM	#15
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 67-72 cab corner 6x9 speaker brackets Cool idea! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-29-2011, 10:26 PM	#16
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 67-72 cab corner 6x9 speaker brackets nice idea dude.

07-29-2011, 10:48 PM	#17
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 67-72 cab corner 6x9 speaker brackets Thanks guys! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

07-29-2011, 11:52 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67-72 cab corner 6x9 speaker brackets cool product! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-31-2011, 09:47 AM	#19
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 67-72 cab corner 6x9 speaker brackets Ttt __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale



Register or Log In To remove these advertisements.

07-31-2011, 10:14 AM	#20
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: 67-72 cab corner 6x9 speaker brackets If you do another run, I'd want a set with no holes, please.

07-31-2011, 10:51 AM	#21
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: 67-72 cab corner 6x9 speaker brackets I too would like a set less holes, pm when and if you make more. Tks

07-31-2011, 12:27 PM	#22
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 67-72 cab corner 6x9 speaker brackets Last Paladin and creepdog If the shop hasn't cut them yet, I will see if I can have them do more with NO holes, and less with them...sound good? I will post back here tomorrow with the update. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

07-31-2011, 01:16 PM	#23
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: 67-72 cab corner 6x9 speaker brackets Sounds good Posted via Mobile Device

07-31-2011, 01:51 PM	#24
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: 67-72 cab corner 6x9 speaker brackets Works for me.

07-31-2011, 08:56 PM	#25
streetstrip1972 Registered User Join Date: Nov 2008 Location: orange ca Posts: 9	Re: 67-72 cab corner 6x9 speaker brackets I'll take a set if u still have any with no holes please thanks bobby

Register or Log In To remove these advertisements.