![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
'72 Suspension List Confirmation
Can someone confirm that this is the entire parts list needed to completely rebuild the front suspension on a '72 C10? I've looked over a number of threads on this subject and confirmed the parts. I just don't want to miss anything.
upper ball joint (two) lower ball joint (two) outer tie rod end inner tie rod end adjuster sleeve pitman arm (P/S) idler arm upper control arm shaft kit (two) lower control arm shaft kit (two) stabilizer bar bushing I got a 20% off napa coupon in an e-mail today, I think this will beat just about everyone's prices.
__________________
Blayne Last edited by thepunisher; 06-19-2013 at 12:06 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
The attached file has the part numbers on it for moog.
__________________
Blayne |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
Ok so now I have another question. Moog seems to be the vendor of choice for front suspension parts. But from what I just read is that Moog was sold by federal-mogol and the quality has deteriorated. That and Napa doesn't sell Moog (at least not listed online). Anyone have recent experience with Moog or Napa?
__________________
Blayne |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,220
|
Re: '72 Suspension List Confirmation
You will need right & left inner & outer tie rod ends. Napa & Moog both have good quality front end parts.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2011
Location: San Jose, California
Posts: 784
|
Re: '72 Suspension List Confirmation
I did a bunch of front end work a year ago with Moog parts. All good stuff, from rockauto.com.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2012
Location: Denver, Co
Posts: 245
|
Re: '72 Suspension List Confirmation
Not sure how much it will cost at NAPA, but I just bought all those from rockauto and it was pretty cheap. When the order arrived I noticed I messed up and only ordered one lower ball joint. I figured I'll just source that locally, it's easy enough. When I looked online the prices were as follows:
Moog K6023 lower ball joint Rockauto: $ 13.75 O'Reilly: $31.99 Pretty shocking!
__________________
Will 1970 CST10 SWB LQ4/4L80E 2004 Silverado (sold) 2007.5 Dodge Ram 2500 |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
I priced this out on Rock Auto, Amazon, and then compared it to Napa's parts (at first I didn't realize Napa didn't sell Moog). Rock Auto is defiantly the cheapest. Napa was around $800 I think and Amazon was about $100 more than Rock Auto.
Thanks Everyone for your input. ![]()
__________________
Blayne |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2012
Location: Denver, Co
Posts: 245
|
Re: '72 Suspension List Confirmation
Remember to get 2 inner and outer tie rod ends and 2 adjusting sleeves! You learn from your mistakes...
__________________
Will 1970 CST10 SWB LQ4/4L80E 2004 Silverado (sold) 2007.5 Dodge Ram 2500 |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
Thanks wgeyer88. Order corrected.
![]()
__________________
Blayne |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
|
Re: '72 Suspension List Confirmation
http://67-72chevytrucks.com/vboard/s...6&postcount=63
this post has my list. oh mines for c20 sorry. i paid around $800. I priced it at rockauto at about $600 but I wanted to buy local. All my stuff was moog. All of it said made in USA on the box. None of it had any stamp of origin on any of the actual parts that i could see. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
Re: '72 Suspension List Confirmation
Don't forget the inner wheel bearing seal.
Maybe get new dust caps and spindle nut/cotter pin. Otherwise looks like you have it all covered. I got all my Moog front end parts from Rockauto also. ![]() Make sure to bring lots of patience and a few cuss words when you go to swapping the shafts. Oh better get a 36mm and 42mm sockets for the shaft nuts. ![]() Posted via Mobile Device Posted via Mobile Device
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
So I found the inner wheel bearing seal but can't find the dust caps and castle nut. Anyone know what they are under?
__________________
Blayne |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
Re: '72 Suspension List Confirmation
I am using 73+ drop spindles so I cant say if they are the same. Although they use the same brake rotor from 71-86. The dust cap should be the same since the rotor is the same unless the 72 spindle shaft stickout is more or less. The dust cap and spindle nut are sold in the help section at most all auto parts stores too for pretty cheap. Maybe just pick them up local where it would be easier to return them if they do not fit.
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: '72 Suspension List Confirmation
Here is the shopping cart with most of the parts to rebuild the front suspension on a 1972 C10. The spindle nuts and dust covers are missing, I will source those locally. The other thing that I didn't include are the sway bar bushings. For those I am going to get polyurethane and may upgrade the sway bar so I skipped those for now. Total with the shipping is $424.64 (without the 5% discount applied).
![]() Thanks again for the help gentleman, greatly appreciated!
__________________
Blayne |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Sep 2011
Location: San Jose, California
Posts: 784
|
Re: '72 Suspension List Confirmation
Don't forget to buy grease. And lots of it!
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Sep 2012
Location: San Antonio, TX
Posts: 1,026
|
Re: '72 Suspension List Confirmation
Yeah I just finished completley rebuilding my front end. The shafts are a pain and drilling out the upper ball joints are no fun either
Posted via Mobile Device
__________________
Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
c10 2wd fleetside, front suspension, parts, rebuild |
|
|