|
11-20-2013, 03:48 PM
|
#1 |
|
Registered User
Join Date: Jun 2012
Location: denver colorado
Posts: 2
|
conversion
I want to take a 67'-72' body and put it on my 1980 k20 frame. Or a 73'-74' body. Is that possible? The reason for this is because the state of colorado requires emissions for 75' and newer. Also, can it it be a c20 body or does it have to be a k20 body? The c20 seems to be cheaper.
|
|
|
|
11-20-2013, 10:55 PM
|
#2 |
|
Registered User
Join Date: Mar 2012
Location: Toano , VA
Posts: 96
|
Re: conversion
I don't know about the pickups but there are major body mount diff from my 87 k5 to my 72 k5 but anything can be done and would be cool to see
__________________
Chris Heinz |
|
|
|
|
11-20-2013, 11:34 PM
|
#3 |
|
Registered User
Join Date: Dec 2012
Location: Oxford, NC
Posts: 92
|
Re: conversion
Anything can be done with a big hammer and welder, but the 67-72 is not a direct swap. The 73-74 should be a direct swap, you could just swap the cab from a 73-74 and use the title for the 73-74 and keep the bed and frontend that you have now.
As for the c20 and K20, the only differences that I know of on the bodies are the transmission humps are bigger and removeable on the k20. If you have a 4x4 then you would be better with a k10/20/30 cab. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
