carb spacers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 04-20-2006, 06:37 PM

Question I will be getting a new carb soon (road demon) Thinking of running a 1/2 inch phenolic spacer 4 hole. My reasons are two fold, phenolic to stop so much heat transfer to carb 4 hole to get more low end power. I am running the rpm air gap intake from edelbrock. Any thoughts on this worth the trouble and expense or worth a try?

Thanks

rtsmith · 04-20-2006, 07:21 PM

Phenolic spacers are well worth the money, we have been using them on race engines for years and I can say with great success.

muddpile · 04-21-2006, 12:53 AM

I've got a 1" phenolic 4 hole spacer for in between my edelbrock performer carb and intake. I've heard lots of good things, so I figure I'll try it.

blazerparts · 04-21-2006, 10:21 AM

Phenolic spacers are a definate must have.

72armyswbtruck · 04-21-2006, 01:54 PM

definate plus well worth the moeny

Ole Blue 68 · 04-21-2006, 06:21 PM

Has anyone tried a Swirl Torque spacer? I've seen them in Summit for like $30 and was considering one.

76bonanza · 04-21-2006, 06:24 PM

Also is it true the 4 hole is better for low end and open better for top end?

Ole Blue 68 · 04-21-2006, 06:27 PM

I think the 4 hole is called a Swirl Torque. At least that's what I've seen them called.

Ole Blue 68 · 04-21-2006, 06:28 PM

Quote:

Originally Posted by 76bonanza

Also is it true the 4 hole is better for low end and open better for top end?

It holds true for intakes so I would think it would be the same for a spacer.

76bonanza · 04-21-2006, 09:20 PM

Some four holes are swirl and some are smooth.

Ole Blue 68 · 04-22-2006, 01:10 AM

Quote:

Originally Posted by 76bonanza

Some four holes are swirl and some are smooth.

I wonder if it really makes a difference...

76bonanza · 04-22-2006, 07:59 AM

Hard to say, in theory it would buuuuttt. In real world hard to say. I will stick with noswirl mainly because of the price difference.

355 · 04-22-2006, 02:20 PM

Put mine on in about 15 min. 4 hole between a stealth and a 750 performer. I like the difference. Pulls hard in the bottom, had 4500# on the trailer and really didn't shift that much going up mild hills. Added about 20' more of burn out.

04-20-2006, 06:37 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	carb spacers Question I will be getting a new carb soon (road demon) Thinking of running a 1/2 inch phenolic spacer 4 hole. My reasons are two fold, phenolic to stop so much heat transfer to carb 4 hole to get more low end power. I am running the rpm air gap intake from edelbrock. Any thoughts on this worth the trouble and expense or worth a try? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

04-20-2006, 07:21 PM	#2
rtsmith Registered User Join Date: Feb 2006 Location: york pa. Posts: 46	Re: carb spacers Phenolic spacers are well worth the money, we have been using them on race engines for years and I can say with great success. __________________

04-21-2006, 12:53 AM	#3
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: carb spacers I've got a 1" phenolic 4 hole spacer for in between my edelbrock performer carb and intake. I've heard lots of good things, so I figure I'll try it. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

04-21-2006, 10:21 AM	#4
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Re: carb spacers Phenolic spacers are a definate must have. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

04-21-2006, 01:54 PM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: carb spacers definate plus well worth the moeny __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-21-2006, 06:21 PM	#6
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: carb spacers Has anyone tried a Swirl Torque spacer? I've seen them in Summit for like $30 and was considering one.

04-21-2006, 06:24 PM	#7
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: carb spacers Also is it true the 4 hole is better for low end and open better for top end? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

04-21-2006, 06:27 PM	#8
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: carb spacers I think the 4 hole is called a Swirl Torque. At least that's what I've seen them called.

04-21-2006, 09:20 PM	#10
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: carb spacers Some four holes are swirl and some are smooth. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

04-22-2006, 07:59 AM	#12
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: carb spacers Hard to say, in theory it would buuuuttt. In real world hard to say. I will stick with noswirl mainly because of the price difference. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

04-22-2006, 02:20 PM	#13
355 Registered User Join Date: May 2005 Location: South Mississippi Posts: 81	Re: carb spacers Put mine on in about 15 min. 4 hole between a stealth and a 750 performer. I like the difference. Pulls hard in the bottom, had 4500# on the trailer and really didn't shift that much going up mild hills. Added about 20' more of burn out. __________________ 1969 C10 Long Step,355,700r4w/lockup, HEI,Weiand,750 Performer,1.6 rockers,Camel Humps,Comp 262Extreme,Hedman,2 1/2"pipes, tele/tilt,SunRoof,ps,Disc pb,ac,Cragar,eaton,Corvette style roll pan, Bowtie louvered tail gate,lowered 2/2.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.