Another LMC exhaust question? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 04-21-2006, 12:23 PM

I read the post down below on LMC and have to ask why?
Where I'm from in Oklahoma I can get dual exhaust with afterburnner mufflers($40 each), 2.5 pipes aluminized, not the cheap ones that rust easy,
From manifolds to back bumper for $220-240. These are nicely bent. Lifetime warranty on hangers so forth and workmanship.
Also in OK there's no rust so it will last 10plus years. I remember when I lived in Kansas City where salt was used pepole said they got complete new exhaust every 2-3 years.

Are exhaust systems much higher other places? Just curious.
There's no way I save $20 just to crawl under my truck for an exhaust that would need to be taken to the shop and welded anyway.
Oh, and if I got mufflers and want to run exhaust from manifolds to dump at the rear end it's only $80 for the pipes.

**oldgold70c10** · 04-21-2006, 12:53 PM

I guess I need to come up to Ponca City then. I called several places in Stillwater about installing a dual system. One quoted $420 with cheap mufflers, and another was about $350 just for the pipes. The same system out of LMC is $169 plus shipping (dual glass pack stock exit).

Longhorn Man · 04-21-2006, 02:42 PM

hell, I asked for pipes from the manifolds to just under the cab... no mufflers, the shop around the corner said 100 bucks a side!

jimmydean · 04-21-2006, 03:51 PM

A local shop here wants $250 with no mufflers and cheap bends. Are you getting mandrel bent pipes for $220?

*wolfthing2000* · 04-21-2006, 04:38 PM

Medford Ore. $400 about everywhere, complete from headers back to good mufflers and back to rear corners.

davidh · 04-22-2006, 06:07 PM

No, no mandrel bends but very good quality. I think if you bring your own mufflers it's like $175 ish. The place is called Jan's Muffler. He's very particular with his work. The other muffler shops are close to that in price as well but his workmanship is much better. If you are close to stillwater come up an extra 40 miles. Just make an appointment and plan on spending a little time ponca while he's doing it. It will take an afternoon or morning. He's very professional. Tell him David sent you. 580 765 7879
I hope this isn't breaking any rules. Just trying to help everyone out.

04-21-2006, 12:23 PM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Another LMC exhaust question? I read the post down below on LMC and have to ask why? Where I'm from in Oklahoma I can get dual exhaust with afterburnner mufflers($40 each), 2.5 pipes aluminized, not the cheap ones that rust easy, From manifolds to back bumper for $220-240. These are nicely bent. Lifetime warranty on hangers so forth and workmanship. Also in OK there's no rust so it will last 10plus years. I remember when I lived in Kansas City where salt was used pepole said they got complete new exhaust every 2-3 years. Are exhaust systems much higher other places? Just curious. There's no way I save $20 just to crawl under my truck for an exhaust that would need to be taken to the shop and welded anyway. Oh, and if I got mufflers and want to run exhaust from manifolds to dump at the rear end it's only $80 for the pipes.

04-21-2006, 12:53 PM	#2
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Another LMC exhaust question? I guess I need to come up to Ponca City then. I called several places in Stillwater about installing a dual system. One quoted $420 with cheap mufflers, and another was about $350 just for the pipes. The same system out of LMC is $169 plus shipping (dual glass pack stock exit). __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

04-21-2006, 02:42 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Another LMC exhaust question? hell, I asked for pipes from the manifolds to just under the cab... no mufflers, the shop around the corner said 100 bucks a side!

04-21-2006, 03:51 PM	#4
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Another LMC exhaust question? A local shop here wants $250 with no mufflers and cheap bends. Are you getting mandrel bent pipes for $220?

04-21-2006, 04:38 PM	#5
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: Another LMC exhaust question? Medford Ore. $400 about everywhere, complete from headers back to good mufflers and back to rear corners.

04-22-2006, 06:07 PM	#6
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: Another LMC exhaust question? No, no mandrel bends but very good quality. I think if you bring your own mufflers it's like $175 ish. The place is called Jan's Muffler. He's very particular with his work. The other muffler shops are close to that in price as well but his workmanship is much better. If you are close to stillwater come up an extra 40 miles. Just make an appointment and plan on spending a little time ponca while he's doing it. It will take an afternoon or morning. He's very professional. Tell him David sent you. 580 765 7879 I hope this isn't breaking any rules. Just trying to help everyone out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.